HI-406BT Bluetooth GPS receiver 1 Table of Contents 1.1 Overview ........................................... 1.2 Main Features ..................................... 2.1 Setting up: Bluetooth GPS receiver ........ 3 4 5 3. Dimensions .......................................... 11 4. Packaging 4.1 Standard Packaging .............................. 12 4.2 Optional Packaging ............................... 15 5. System Specifications ............................. 19 6. Get Connected; Installation Guide 6.1 Laptop PC Installations ........................ 22 6.2 PDA Installations ................................. 25 2 1.1 Overview Introduction HI-406BT is a GPS (Global Positioning System) receiver in wireless Bluetooth interface with buildin active antenna and extra digital compass functions. With HI-406BT, your mobile devices, such as, Smartphone, PocketPC, laptopPC, tabletPC, etc. can receive GPS data wirelessly and perform the GPS applications, such as, car navigation, personal navigation, route planning, tracking, etc. Equipped with the most powerful and ultra high sensitive SiRF StarIII chip set, HI-406BT can get the 3D fix in very short time and under poor reception environment, such as in the middle of the car, next to the tall building, in your backpack, or pocket. 3 1.2 Main Features: · 20 Channels "All-In-View" Tracking · Position accuracy of 10 meters 2D RMS · Cold/Warm/Hot Start Time: 42/38/1 Seconds (Signal Strength > 30 dB-HZ) · Reacquisition Time: 0.1 seconds · Support Standard NMEA-0183 at 19200 bps baud rate (Defined by customer 4800 up to 57600) · Support Power Saving Mode · Compatible with Bluetooth devices with Serial Port Profile (SPP) · Superior Sensitivity for Urban Canyon and Foliage Environment · Ultra small, sleek, and lightweight design easily fits in your hand · Li-polymer battery lasts for more than 8 hours of use in connection 4 2.1 Setting up: Bluetooth GPS receiver STEP 1: Open the battery cap and put the battery (406-BTT) into the battery compartment. Push down and pull out 5 STEP 2 Connect the AC charger to home electronics outlet or connect the inclusive DC charger to the car cigarette lighter. As soon as they connected, the solid amber light on the right side in front of HI-406BT will turned on (stay on) meaning the battery charging. AC charger to home electronic outlet DC charger to car cigarette lighter (DC 12V~24V) Mini-1394 MMCX external antenna plug female connector for power in and GPS signal out 6 STEP 3 As soon as the battery fully charged, the amber light will turned off, then, unplug the charger. Indicator for power charging and GPS status Indicator for battery low (Red) and Bluetooth status (Blue) 7 STEP 4 There is switch on side of HI-406BT. The switch on the right side is for Bluetooth GPS receiver. As soon as turn on the switch on the side, the GPS receiver will start to function and search the satellites. Meanwhile, the LED indicator on the right side in front of HI-406BT will turned green (stay on - the GPS receiver not get 3D fixed yet) Please make sure place the HI-406BT outdoor open space so that it can get the proper satellite signal. After HI-406BT gets enough satellite data (lock more than 4 satellites), HI-406BT is in 3D fixed and the green light start blinking. 8 Bluetooth GPS Switch LED indicator color Amber LED off Green (blinking) Green (Stay on) Blue (blinking) Blue (stay on) Red Status HI-406BT battery charging HI-406BT battery fully charged GPS in 3D fixed GPS searching more satellite and not in 3D fixed yet Bluetooth searching host device Bluetooth paired and connected HI-406BT battery low 9 STEP 5: As soon as turn on the switch on the right side, the Bluetooth will also start to function and searching. The blue light on the left side in front of HI-406BT will turned on (Blinking) meaning the Bluetooth is searching the host device and not get paired yet. Please consult the Bluetooth step by step connection guide from this manual on section. The pin code is " 0000 " when asked the pin code. After the Bluetooth paired and connected, the blue light will stay on. STEP 6: Open the mapping software from your mobile device, select the corresponding COM port and start GPS. STEP 7: Enjoy the state of the art wireless GPS navigation. 10 3. Dimensions Top View Unit: mm Button View 64.80 46.40 Side View Front View 24.00 Back View 11 4. Packaging Model Name 4.1 Standard Packaging: model# HI-406BT 406-BBT 401-USB USB-DCC BAG-002 MAU-406 CDR-01 1 Bluetooth GPS receiver 2 Rechargeable Li-Polymer 3.7V 1000 mAh battery 3 Mini1394 to USB cable 4 Cigarette lighter adaptor with USB female plug 5 Carrying pouch 6 HI-406BT user manual 7 Mini CD 1 12 2 3 4 13 5 5 6 7 14 4.2 Optional Packaging: Model Name 1. MMCX external antenna 2. mini-1394 to PS/II connecting cable 3. AC power adaptor with USB female plug model# ANT-MMC PS2-1394 USB-ACC ANT-MMC PS2-1394 USB-ACC 15 MMCX antenna Under blocking area, the external antenna can extend the signal reception from HI-406BT 16 PS2-1394 By connecting to different optional connecting cables, HI-406BT can be a wired PS/II GPS receiver and used with all kinds of mobile devices. 17 HI-406BT as a GPS mouse By counecting different optional counecting cables, HI-406BT can be all kinds of wired GPS receiver solutions. 18 5. System Specifications Main Features GPS General Chipset SiRF Star III Channel Supports 20-channel Frequency L1 (1575.42MHz), CA code TTFF (Open Sky) Hot Start 8 sec. Warm Start 38 sec. Cold Start 42 sec. Acquisition Sensitivity Hot 17dBHz Warm 23dBHz Cold 30dBHz Tracking Sensitivity -159dBm Position Accuracy 10m, 2D RMS Dynamic Conditions Altitude(Maximum) 18,000m (60,000ft) Velocity(Maximum) 515m/sec(1,000knots) Acceleration(Maximum) <4g 19 ...