User manual HAICOM HI-505SD

HI-505SD Bluetooth® GPS Receiver with SD interface USER MANUAL 1 To insert in: Push down to the end and hear a "click" sound 1 2 To take it out: Push down to the end 1 and HI-505SD will spring up 2 Take out the device 1 HI-505SD Bluetooth® GPS receiver with SD (Security Digital) interface Introduction: HI-505SD is a standard Bluetooth® GPS receiver with standard miniSDTM to SD adaptor. HI-505SD equipped with the most recent 20 channel ultra high sensitive SiRF StarIII GPS chipsets and wireless Bluetooth® module. Simply plug HI-505SD into any devices equipped with the standard SD slot, user can instantly enjoy the state of the art wireless GPS navigation. The basic concept of the HI-505SD is that the Bluetooth®/GPS section only taking power from the host device (like PDA, UMPC, tabletPC, laptopPC, etc.) via the miniSDTM to SD adaptor. In the meantime, users can still using the miniSDTM memory card without worry about the SD slot was occupied. 1 2 HI-505SD advantages: 1. Simply plug in the HI-505SD into any SD slot from the standard mobile device with Bluetooth® features, the device become the all-in-one GPS navigator. HI-505SD provides the flexibility for GPS enable in different devices and different occasion usages. 2. Unlike other SD GPS receivers occupied the SD slot, HI-505SD allow user to use any memory size miniSDTM card while using the HI-505SD simultaneously. 3. Unlike most SD GPS receivers with fixed build-in memory, HI-505SD provide the flexibility for using any separate memory size miniSDTM card depend on how big the memory size needed. 4. Unlike regular SDIO GPS receiver require complicated software and driver installation, user can easily use HI-505SD and enjoy the GPS navigation simply set up the standard Bluetooth® connection between the devices. 5. As soon as plug in HI-505SD, user can start using the wireless GPS navigation without worry about the Bluetooth® GPS receiver battery life. 6. Equipped with the 20 channel ultra high sensitive SiRF StarIII GPS module, HI-505SD can get 3D fixed in any outdoor locations and without using the external antenna. 7. Unlike normal Bluetooth® GPS receiver moving around dashboard while driving, HI-505SD fixed on the mobile device and not to worry about where to place the unit. 8. HI-505SD module concept allow HI-505SD become a wired GPS receiver. By connecting with different optional cables via the adapting box, HI-505SD can also be used as a regular GPS mouse. HI-505SD can not only be wireless Bluetooth GPS receiver and also be the wired GPS receivers, like, USB GPS receiver, RS232 GPS receiver, PDA GPS receiver, etc. 2 3 Accessories: Standard Accessories: Model Name model # 1. HI-505SD Bluetooth® GPS receiver unit HI-505SD 2. Tool CD CDR-01 3. User Manual MAU-505 1 2 3 3 4 Optional Accessories: 1. Adapting box 2. MMCX External antenna 3. PDA charging cable (plug on the adapting box) 1 2 4 5 HI-505SD Bluetooth GPS receiver installed on cigarette lighter outlet ® MMCX external antenna plug Bluetooth® / GPS status LED LED Indicator (Red) LED off Receiver switch off LED Indicator (Blue) LED off Bluetooth® switch off LED flashing GPS Position Fixed LED stay on GPS Signal searching LED flashing Bluetooth® searching LED stay on Bluetooth® connected 5 6 HI-505SD on a PDA: A complete all-in-one GPS navigator HI-505SD + PDA with horizontal mapping software 6 7 HI-505SD with PDA phone as a all-in-one GPS navigator HI-505SD with laptop PC with SD Slot 7 8 HI-505SD + PDA as a portable navigator 8 9 Dimension: 46mm 34mm 13mm 18mm 80mm 24mm 43mm 20mm 18mm 9 10 GPS Receiver Specification Chipset Interfaces Protocol Baud Rate Max. Update Rate Datum Channel Frequency Hot Start Warm Start Cold Start Reacquisition Tike Position Accuracy Macimum Altitude Maximum velocity Voltage Power consumption Antenna Type External Antenna Connector Dimension LED Indicator Fold: 46 (L) x 43 (W) x 20 (H)mm Unfold: 80 (L) x 43 (W) x 18 (H)mm 3D Positioning (blinking) or Searching GPS (on) SiRF Star III ® Bluetooth & Mini-1394 NMEA0183 GGA, GSA, GSV, RMC, GLL 4800, N, 8, 1 1 Hz WGS84 20 channel L1, 1575.42MHz 8 sec. Average 38 sec. Average 48 sec. Average 100 ms 15m 2D RMS, SA off 18,000m 515m/s DC 3.3V+-10% 90mA continuous mode Built-in active antenna MMCX (Optional) 10 11 Bluetooth® Specifications: Bluetooth V1.1 Compliances ® Frequency Range: 2.4 ~ 2.4835 GHz unlicensed ISM band USB/UART/SPI -80 dBm @ 0.1% BER Class 2 -6 dBm ~ +4 dBm 50 ohms 1600hops/sec. 16MHz Up to 723Kb/s -20° C ~ +80° C -30° C ~ +90° C 10 meters (Typical) 65 mA (Typical) Interface: Receiver Sensetivity: Transmitting Power: RF Input Impedance: Frequency hopping: Baseband Crystal OSC: Data Rate: Operating Temperature: Storage Temperature: Transmitting Range: Power Consumption: 11 12 HI-505SD as a regular GPS mouse: By connection different optional connecting cables, HI-505SD can be all kinds of independent wired GPS receiver solutions. 12 13 Connecting to a Notebook Connect HI-505SD to your Notebook as a USB GPS Receiver 13 14 Disassemble Step 1: Turn the silver knob down to the end Step 2: The silver knob spring out Step 3: Separate the two parts 14 15 Assemble Step 1: Put two parts in position Step 2: Push the silver knob in * Make sure two triangle align during disassemble or assemble Step 3: Turn the silver knob back to other end 15 16 Bluetooth® Installation Follow the instructions below to link HI-505SD to a PDA (Personal Digital Assistant). 1. Activate "Bluetooth Manager" on your pocket PC. Tap New, Connect, to access other devices via Bluetooth. 16 17 2. Search Bluetooth device "HI-505SD". Select Explore a Bluetooth device, and tap Next. 3. Search for the Bluetooth device. Tap Next, and then select HI-505SD 17 18 4. To establish Bluetooth link, select Connect to SPP Slave, tap Next and then Finish. 5. Tap HAICOM BT GPS:SPP slave, and select Connect from the dropdown menu. The installation has been completed. 18