User manual HAICOM HI-601VT

HI-601VT GPS/GSM Real-Time Tracker USER MANUAL 1 HI-601VT 1 HI-601VT GPS/GSM Tracker INTRODUCTIONS: With HI-601VT GPS/GSM tracker, one can track, remote control, tapping any object globally in real time by using any regular SIM card (with one phone number), any regular phone (home phone, mobile phone, smart phone, etc.) and any local mapping software or Google Earth. No any special software needed. Because HI-601VT is small in size and main unit come with the big capacity rechargeable battery, it is also very suitable for personal tracking. On the HI-601VT, one can press the "panic button" and HI-601VT will instantly dial back to the preset telephone numbers (can set three numbers in different priority). With the optional car kit accessories, car control cables, microphone, moving sensor, one can remotely control certain functions: Car control cable sets: To stop the car oil and electricity from any phone. Micro-phone sets: to hear the voice from HI-601VT side. Vibration sensor: HI-601VT will automatically dial back when the moving occur. 1 2 HOW HI-601VT works: Unlike most GPS/GSM tracker using the GPRS communication in SMS message in none-real time mode and require control station (require monthly fee) or Internet access, HI-601VT no need any control center and special software. Since it is point to point solution, it is also no need to check the object from the Internet. wherever one can make the phone call, one can track the object and see the moving from any mapping software in real time. 2 HI-601VT 3 Just like you call someone and he tells you where the object is and shows you where he is on the mapping software. HI-601VT provide non-stop and continue real time tracking without time limitation. Just like you talk to someone over the phone as long as you can. 3 4 Step by Step operation explanations: 1. Switch power on HI-601VT main unit. 2. The GPS receiver module in HI-601VT start receive GPS satellite signal (The GPS LED blinking means the GPS is in 3D fixed and the data is valid) 3. The GSM module starts sending the GPS data via GSM network back to the host side (The GSM LED blinking means the GSM network stand by and stay on means the GSM connected with some host) 4. Dial the Telephone number from the host side to the HI601VT main unit. 4 HI-601VT 5 5. Switch on HI-601VT decoder (Switch on the middle for data out via wired connection and to the most right side for wireless Bluetooth connection) 6. Connect the voice jack cable to the voice outlet from the phone. 7. The HI-601VT A/D decoder start to decoding the Analog GPS voice message into real-time GPS digital NMEA message. 8. On the decoder unit, connect the PS/II output cable or set up Bluetooh connection to the display unit (such as smart phone, PDA, laptopPC, desktopPC, etc.) 9. Using any standard NMEA mapping software, select the com port, start GPS (just like using normal GPS receiver) 5 HI-601VT main unit overview 6 Alarm release SOS panic button Connector for data control output and power in Mini1394 connector GPS status LED for GPS data output and power in GPS MMCX external GSM status LED Power status LED antenna plug Power ON/OFF 6 HI-601VT Getting Start 7 Open battery cabinet cover 1 Insert SIM card 3 2 4 Put battery in Close battery cabinet cover 5 7 8 GSM LED indicator Status GSM Stand-by Searching network or no SIM card Network connected Power LED indicator Status Battery low External powered (Power full) External powered - charging GPS LED indicator Status Searching GPS GPS 3D fixed LED (Color) Red Green Orange LED Off 3 sec. and on 75 micro Sec. On 600 micro sec. and off 600 micro sec. Stay on LED Stay on Blinking HI-601VT set contains two main units: 1. HI-601VT unit installed on the "client side": in your car, someones' back pack, etc. 2. Decoder unit carried with the "host side" Inside HI-601VT contain five main parts: 1) SiRF StarIII high sensitive GPS receiver module, 2) Tri-band GSM module, 3) System control circuit section, 4) Power management section, 5) Rechargeable battery Decoder unit contain three parts: 1) A/D converter circuit section, 2) Bluetooth module, 3) Two 3A batteries 8 HI-601VT 9 Inside HI-601VT, the GPS module receive satellite signal and transfer the data into standard NMEA protocol data. Then, the GSM module transmit the data in analog voice message via regular communication network (just like calling and talk from one phone to another phone). As soon as these two devices communicated, HI-601VT will keep transmitting the "voice" to the user side. By connecting the voice phone jack cable from the users' phone to the decoder unit (the purpose of the decoder unit is to transfer the analog voice message into the digital NMEA standard sentences), the wireless Bluetooth module inside will start sending the NMEA message to the display devices, such as, PDA, laptopPC, desktopPC, etc. after the Bluetooth connection was set up. Track with different occasions: 1. With Smartphone: If user has the smartphone (PDA with Bluetooth feature and phone function), by connecting the decoder from the voice jack, one can communicate to the HI-601VT with the smartphone and perform the tracking on the same smartphone. 2. With PDA and mobile or home phone: The phone set up communication to HI-601VT. Connect the voice jack cable between the phone speaker phone jack and the decoder. The decoder sends the NMEA sentence back to the PDA via the Bluetooth connection. 3. With laptopPC and mobile or home phone: The phone set up communication to HI-601VT. Connect the cable between the phone speaker phone jack and the decoder. The decoder sends the NMEA sentence back to the laptopPC via the Bluetooth connection or by the cable sets. 9 10 HOW to USE Option#1 4 3 1 2 1. Decoder with smart (PDA) phone: 1. The smart (PDA) phone calling or communicate with the HI-601VT 2. Voice message to the decoder 3. Voice message was transferred into standard digital NMEA protocol data 4. The NMEA data was transmitted back to the smart (PDA) phone via Bluetooth® connection wirelessly 10 HI-601VT HOW to USE Option#2 11 3 1 PDA cable 2 4 1. Decoder with smart (PDA) phone: 1. The smart (PDA) phone calling or communicate with the HI-601VT 2. Voice message to the decoder 3. Voice message was transferred into standard digital NMEA protocol data 4. The NMEA data was transmitted back to the smart (PDA) phone via PDA cable 11 12 HOW to USE Option#3 USB port from LaptopPC 3 1 4 2 1. Decoder with smart (PDA) phone and laptopPC (or desktopPC): 1. The smart (PDA) phone calling or communicate with the HI-601VT 2. Voice message to the decoder 3. Voice message was transferred into standard digital NMEA protocol data 4. The NMEA data was transmitted to the laptopPC via USB cable 12 HI-601VT HOW to USE Option#4 13 Mobile Phone 3 1 4 2 1. Decoder with mobile phone and laptopPC (or desktopPC): 1. The mobile phone calling or communicate with the HI-601VT 2. Voice message to the decoder 3. Voice message was transferred into standard digital NMEA protocol data 4. The NMEA data was transmitted to the laptopPC via USB cable 13 14 HOW to USE Option#5 4 Bluetooth® dongle 3 1 2 1. Decoder with mobile phone and laptopPC (or desktopPC): 1. The mobile phone calling or communicate with the HI-601VT 2. Voice message to the decoder 3. Voice message was transferred into standard digital NMEA protocol data 4. The GPS NMEA data was transmitted to the laptopPC via Bluetooth® wirelessly 14 HI-601VT 15 4. With smartphone or mobile phone and track with SMS in none-real time bases (without decoder): The phone set up communication to HI-601VT. Press "71" and hang up the phone. In few seconds, the phone will receive a short message indicating the HI-601VT current coordinates. Then, go to Google Earth or any mapping software (in none navigation mode) and key in the coordinates. The map will point out the exact location. (1) Dial the number to HI-601VT (2) After connection, press "71". then, hang up. (1) (2) In few seconds, your mobile will receive a SMS message reqarding to the current location coordinate. 15 16 Key in the coordinates into the Google Earth or any mapping software for the location Key in latitude and longitude data received from SMS 16 HI-601VT 17 Use HI-601VT unit as a regular GPS receiver: By connecting different kinds of optional accessory cables from the side of HI-601VT mini1394 connector, the HI-601VT can also be all kind regular GPS receivers. For instance, HI-601VT can connect a HI-403BT cube and the combination can be a regular Bluetooth GPS receiver for car navigation. Or, connect an optional USB cable to become a USB GPS receiver for laptopPC navigation. Use HI-601VT as a regular Bluetooth GPS receiver (with HI-403BT box and cigarette lighter) 17 18 HI-601VT as a regular wired GPS mouse: By connection different optional connecting cables, HI-601VT can be all kinds of independent wired GPS receiver solutions. 18