PLASMA TV OWNER`S MANUAL MODELS: 42EP24STV Please read this manual carefully and completely before operating the unit, and retain this manual for future reference. WARNING RISK ELECTRIC SHOOK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product. Read the following safety instruction before starting the operation. The User Manual uses the following symbols to ensure a safe operation and prevent any damage to operators or properties: THIS SYMBOL INDICATES THAT HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY INSIDE PART OF THIS PRODUCT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However ,there is no guarantee that interference with not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures: *Reorient or relocate the receiving antenna. *Increase the separation between the equipment and receiver. *Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. *Consult the dealer or an experienced radio/TV technician for help. This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may be not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION: To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used when connecting this plasma display to video equipment; and maintain at least 40cm spacing to other peripheral device. CANADIAN NOTICE: This Class B digital apparatus compiles with Canadian ICES-003. 2 Plasma TV IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference. 2)All warning on the appliance and in the operating instructions should be followed. 3)Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use only dry cloth for cleaning. 4)Attachments ---do not use attachments not recommended by the manufacturer as they may cause hazards. 5)Water and moisture -- do not place this product near water, for example, near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 6)Accessories ---do not place this unit on an unstable cart, stand, tripod, bracket, or table. Use only with a cart, stand, tripod, bracket, or table recommend by the manufacture, or sold with the unit. 7)Ventilation ---Slots and openings in the cabinets and the back or bottom are provided for ventilation. These openings must not be blocked. In a built in installation such a bookcase or rack do not install product unless proper ventilation is provided. 8)Power Source ---this TV should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. 9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected. 10)Power cord protection ---Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords or plugs, convenience receptacle, and the point where they exit from the appliance. 11)Lighting precaution ---for added protection for this product during a lighting storm or when it is left unattended for long period of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lighting and power line surges. 12)Never push objects of any kind into this product through openings as they may touch dangerous voltage point or short out parts that could result in a fire or electric shock. Avoid spilling liquid of any kind on the product. 13)Servicing ---do not attempt to service the product by yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to authorized service personnel. 14)Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. Owner s Manual 3 b.If liquid has been spilled, or objects have been fallen into the unit. c.If the unit has been exposed to rain or water. d.If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation. e.If the unit has been dropped or damaged in any way. f.When the unit exhibits a distinct change in performance; this indicates a need for service. 15)Heat --- The product should be situated away heat source such as radiators, heat registers, stoves, or other products (Including amplifiers) that product heat. 16)Overloading ---Do not overload wall outlets and extension cord as this can result in a risk of fire or electric shock. SAVE THESE INSTRUCTIONS Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. Model number serial number Date of purchase 4 Plasma TV Warning..............................................................2 Safety Instructions............................................ 3-4 Introduction Controls...........................................................6 Connection Options...........................................7 R emote Control Key Functions ...........................8 Installing Batteries............................................8 Installation Installation instructions....................................9 VCR Setup.......................................... .......... 10 Cable TV Setup ................................... .......... 10 External A/V Source Setup...............................11 DVD Setup.....................................................11 DTV Setup .....................................................12 Monitor Out Setup...........................................12 PC Setup.......................................................13 Install the Speakers........................................14 Install the Stand.............................................15 Install the Stand to the PDP............................. 15 Operation Turning the TV On Turning on the TV .......................................16 Choose the Menu Language ........................16 Choose the Input Source .............................16 Basic Function Operation Menu..........................................17 Sound Mode................................................17 Picture Mode...............................................17 Sleep Timer.................................................17 System Menu Channel Type ................................................18 CATV Type ....................................................18 Automatic Scan ..............................................18 Fine Tune ......................................................19 Color System ..................... ...........................19 Skip ..............................................................19 Prog. Switch.......................................................19 Picture Quality adjust Picture Quality Adjust .........................................20 Sound Adjustment Sound Adjust......................................................21 Adjustment Setup Adjustment Setup ...............................................22 Function Setup Function Setup...................................................23 Menu Menu Language Option ..............................23 Menu Time out Option.........................................23 Menu Background Option....................................23 Calendar Display and Check ...............................23 Auto Off.............................................................23 BlueScreen .......................................................23 Close Caption....................................................24 Parental............................................................24 Time Setup............................................................25 Clock Setting ....................................................26 Off/On time .......................................................26 Rimind Time/Remind Prog. .................................26 Lock Menu Options Lock Setup........................................................27 Change Password..............................................27 Tuning Lock .....................................................27 Preset Prog. ....................................................27 Prog. Num .......................................................28 Source Lock.................................................... 28 Child Lock....................................................... 28 Max Volume.....................................................28 Unlock............................................................ 28 Screen Menu Options............................................. 28 Auto Adjustment ................................................29 Setting Picture Format .......................................29 Screen Position ................................................29 Troubleshooting Checklist...................................... 30 Maintenance......................................................... 31 Product Specifications........................................... 32 Setup and Operation Checklist (See pages 10~15 for available connection and operational setup options.) 1. Unpack TV and all accessories. 2. Connect all external video and audio equipment. See pages 10 ~ 13. 3.Install the speakers and stand. see pages 14~16 . 4. Install batteries in remote control. See page 8. 5. Turn TV on. See page 16 6. Turn video source equipment on. Owner s Manual 5 Front panel controls EXIT INPUT VOL VOL MENU Menu exit Power On/Off Button Signal source input option Power Standby Indicator illuminates red in standby mode,illuminates blue when the display is turned on Remote Control Sensor Down/Up. Sele ct desired option on MENU or tune to the desired channel. VOLUME Buttons MENU Button 6 Plasma TV Real panel controls S-Video Input VGA Input/Audio input DVI Input/Audio input connect your cable/PC through the input Power On/Off Earphone port 0 VGA IN COMPONENT IN DVI IN AV OUT AV IN SWITCH R L VGA AC-INPUT AUDIO OUT AUDIO Pr/Cr Pb/Cb Y L-AUDIO-R DVI AUDIO VIDEO L-AUDIO-R VIDEO S-VIDEO L-AUDIO-R ANT IN DVD/DTV Input Connect a component video/audio device to these jacks AUDIO output External audio/ video output Audio/Video Input Connect audio/video output from an external device to these jacks Antenna Input Connect cable or antenna signals to the TV, either directly or through your cable box. Power Cord Socket This TV operates on AC power. The voltage is indicated on the specifications page. Never attempt to operate the TV on DC power Owner s Manual 7 When using the remote c ...