User manual HAIER 50FREE-3B

Fully Automatic Washing Machine User's manual This manual is for 50FREE-3B Please read this manual carefully before using. Retain it for future reference. Special number:0030805269B Packing list Contents Names of the parts 1 Safety precautions 2 Installation and adjustment 4 Install the water inlet hose 6 Preparation before washing 8 Put in the laundries 8 Add the detergent 9 Use the operation buttons 10 Close the top lid 14 Washing finished 14 Disposal after washing 15 Trouble shooting Answer to question 16 Packing list 17 Specification table the cover 2 User's manual Warranty card The side of connection between the water inlet hose and the washing machine Quantity One One One The side of connection between the jointer of the water inlet hose and the water faucet Tapping screws Eight Bottom plate One Between the upper cushion of the washing machine package and the upper seal of the package carton Inner cover component One Inside in inner tub of washing machine Automatic washing machine One Specification Water level/Water quantity (about) Water level/Water quantity (about) Max water consumption Injection pressure Rated washing spinning capacity Rated washing / / spinning capacity High/33L, Medium/22L,4/32L 1/17L 2/21L 3/26L Low/14L 0.03Mpa-0.78Mpa 0.03Mpa-1.0Mpa 3.0kg (weight of standard dry cloth) 3.3kg (weight of standard dry cloth) 17 Trouble-shooting answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Top lid Names of the par ts Water-absorption gasket Control panel seat Lint filter Inner tub Pulsator Out tub cover Power cord Back cover Inner cover components Water inlet valve Phenomena The drainage cannot work, or is too slow. The digitron displays E1. The reason Is the drain hose hang up to suitable height? Is the drain hose blocked? How to settle Hang up to suitable height . Open and close the top lid once. Clean the foreign material. Open and close The top Lid Once. Close the top lid. Reorder the laundries. Close the top lid. The machine will start running after 10 seconds of being placed horizontally. Open the water tap. Open and close the top lid once. Clean the water inlet valve then open and close the top lid once. Open and close the top lid once. Hang up to suitable height . Please contract the after-sales service department Please use it when there's power supply. Insert the power plug tightly. Fill water to the preset position. Insert the power plug tightly. Close the top lid. Set the laundries flat. Adjust the machine to be even Reorder the laundries and close the top lid. Remove the foreign materials. Fasten the jointer properly. Handle It stops running in midway. The digitron displays E2. The safety switch acts, and the spinning cannot work. The digitron displays E3. The top lid is not closed. Are the laundries put slantingly? Is the machine slanting? Control panelfilm Cabinet Hook Is the water tap opened, or is there water The water filling does not work, or is supply failure? Is the water inlet valve blocked? slow, the digital displays E4. Is the water pressure too low? Is the drain hose hang up to suitable height? The digitron displays F1. Not wash The machine does not act Not spin The water level sensor is bad. Is there power failure? Is the power plug inserted tightly? Is the water level reached preset position? Is the power plug inserted tightly? Is the top lid closed reliably? Are the laundries set flat? Is the machine slanting? Are the laundries put slantingly in spinning? Are there any foreign materials? Is the jointer of water inlet hose loose or awry? Drain hose Base Adjustable foot Adjustable foot film Fixed foot(3 pcs) Meaning and description of the symbols Warning sign There's abnormal sound inside the machine The water tap leaks Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents. Common phenomena Phenomena The spinning is intermittent when it starts. Select spin program, but it does not work. The pulsator pauses during water inlet in wash and rinse. Explanation Balance the laundries to avoid slanting. The program is setting the drain time , certain period is needed before it starts spinning. It is to avoid splashing during water inlet Forbidden sign Contents marked with that symbol are actions forbidden to perform. Performing of those action may result in damage of the machine or influence the personal safety of the users. There may be some water flowing out of the drain hose in the first use of the machine. It is the water remained performance inspection by the factory. 16 1 Safety precautions Please insert the power cord into special receptacle with rated voltage.If the power cord is three-phase wire,please use three-phase receptacle.The earthing terminal of the receptacle must be earthed reliably.If it is two-phase wire, please guarantee that the earthing wire is earthed reliably.If possible ,please adopt electric leakage protector. The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine is idle,when moving the machine,or when cleaning the machine.Do not use wet hand to insert or pull out the power plug. Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. It must be cleaned in time after each using. Lint filter: 1.Push down the spring piece of the top lint filter to make the claws out of the filter cover, and then pull out the lint filter to get it down. figure1 2.Pull the back of the lint filter, and then you can get down it off the front cover of the lint filter. figure2 3.Sweep the rubbish in the lint filter. 4.Put the back of the lint filter into the front cover . 5.Put the lint filter into filter cover, and make it tight . 6.Make sure the lint filter well installed, or it can influence your use. Install Up Dismantle Down Figure 1 The back cover of lint filter Dismantle Install Down The front cover of lint filter Figure 2 Up Do not damage the power cord,bend ,extend,twist,bind or alter it by force.Do not press or nip it with weight.If the power cord or the power plug is bad, or the power plug becomes flexible,to avoid risk it is required to have it replaced by the technicians of our special shop or the costomer care agent. Keep the pin of the power plug clean,if the power plug is polluted with dust,please wipe with dry cloth carefully. Do not put the machine at damp place like the bathroom. Never wash it with water. Not put wet laundries on the control panel. Do not use water hotter above 50 C . The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months. If the cabinet is dirty, wipe it with wet cloth Do not flush it directly with water. Wipe it with neutral detergent. Do not wipe it with thinner, petrol, alcohol etc. In case the washing machine is installed on ground with carpet, do not block the ventilation hole with carpet. Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations. The ventilation holes at the bottom soft items 1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). 2.Do not store water in the washing machine for a long period. Drain the water completely after each using. Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more. 3.Be sure to pull off the power plug before maintenance. 4.Hang up the power cord and drain hose. 5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time ( about 1 hour), then close the top lid. 2 15 Safety precautions Water Level and Time Table for Each Program (self programming not included) Program STANDARD Save GENTLE HEAVY Water level 1~4 1 1~4 1~4 Wash(minutes) About 18 Rinse(minutes) Rinse twice, about 17 Spin(minutes) About 4 Total time(minutes) About 43 About 10 About 4 About 4 About 31 About 65 XQB M33200 Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children.Do not let the children climb the washing machine. Do not decompose, repair or alter the machine by yourself. Saving water program, total about 10 minutes About 6 SOAK+WASH about 40 Rinse twice, about 17 Rinse twice, about 17 Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) Total time will add 3 9 minutes during DISINFECT selected Attention: Petro l Thinner * * * Total time: including the normal water inlet time and drain time. Spin time: the time from intermittent running to finishing When selecting SAVE wash program, wash, rinse and spin are set automatically. 5 Push START/PAUSE button START PAUSE The handicapped or children without care shall not use the machine. Keep the machine away from direct sunlight and heat source like the heater. 5 Close the top lid If you open the top lid, the machine will stop working except for water filling and draining To prevent your laundries and washing machine from damage,be sure to take out all of the foreign materials from your pocket,such as coins,buttons,sand or hair pins etc. 6 Washing finished The power will be switched off automatically after the finishing of the washing. After the finishing of the washing,It will give an alarm Please keep the lint filter in good condition, and install it to proper position. If the lint filter is lost or damaged, please contact costomer care agent of our company. Before washing,please check if the water tap is open ,and if the water inlet pipe is connected properly. It is suggested to use low-foaming washing powder Dismantle Install 14 3 Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, aiming the inner cover shaft to the installation hole of the corresponding outer tub cover shaft groove. 3.Firstly insert the inner cover shaft of one side into the corresponding outer tub cover shaft groove, then push the another inner cover shaft into the corresponding outer tub cover shaft groove. Please install to designated position to guarantee there are no dropping or abnormal sound in opening and closing of the inner cover, and the operation shall be smooth. Do not dismount the inner cover component after washing. Outer tub cover Outer tub cover shaft groove Inner cover shaft Inner cover component Left hand Right hand After switching on the power, the washing machine will set to common program including"wash, rinse, spin "automatically.To select other procedures, push the " WASH"," RINSE"or "SPIN"button to select the time of wash and spin, and the times of rinse. After switching on the power,if you push one of the button among "RINSE"and"SPIN the digitron of the former procedures will turn off automatically. The former procedures will not run. For instance: after switchingon the power. If you push the "SPIN" button first, it will execute spin singly after starting. Attention Even there's no water in the tub, a certain period is required before spin starting. Separate the laundries that are not colorfast from other laundries in washing. Do not use the HEAVY program for the woollen textiles. The pulsator will not rotate unless the water is filled to water level . After the machine starts operation, you can set the program and procedure during washing, set spinning time during rinsing but can not make setting in other cases. Figure 1 Figure 2 Install the bottom plate After you open the package, please lean the washing machine gently down on softitems ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently. See to the figure: Bottom plate Back Front Press " WATER LEVEL "button, select suitable water level WATER LEVEL Screw soft items After switching on the power, select a suitable water level to detect the cloth. To select other water level.Refer to "water level, water quantity and desoge of powder"in Page 9 and "WATER LEVEL/DISINFECT"button in Page 10 for the selection. Adjust the installation position The washing machine shall be more than 20mm away from the wall.The largest allowed slope of the supporting base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Page 9 Page 10 Confirm it's horizontal: Hang the lead line to confirm if it is horizontal. Adjust the adjustable foot: 1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot. 2.Fasten the nut after adjustment. adjustable nut Loosen High Low Fasten adjustable foot 4 13 b Steps of using the operation buttons and description of the steps How to change the direction of the drain hose 1.Lean the machine down gently with the front surface facing the ground. Loosen the eight screws by a cross screwdriver. Back Bottom plate 3.Extend the drain hose from the left side. Push the drain hose into the groove with hands. Front POWER ON/OFF Soft item Push the drain hose into the groove with MIN START PAUSE 2.Pull out the drain hose from the groove at the right side. Use groove at this side after direction changing 4.Install the bottom plate (as per indicated before), then lift the machine up gently. 1 Push the POWER ON/OFF button to switch on the power POWER ON/OFF After switching on the power,DISINFECT is not selected To select DISINFECT,push WATER LEVEL/DISINFECT over 2 seconds, the DISINFECT function works,then push 2 or 3 to select a suitable program. Using the drain hose The drainage shall be smooth with the drain hose. 1.put the drain hose up to suitable position (Do not 2.Do not step on or press the drain hose. put it on ground.) Notes: The highest point of drain pipe shuold be higher than the water level of washing tub for avoiding to siphon phenomenon during drain. 2 Push the PROGRAM SELECTION button to select the suitable automatic program PROGRAM After switching on the power, the machine will set to STANDARD program automatically. To select other program, push the PROGRAM SELECTION button till the corresponding indicator is on. Refer to the PROGRAM SELECTION button in Page 11. For example: select SAVE WASH for the quick washing of QUICK wash Page11 the laundries with light dirt. 3 Push WASH RINSE suitable programs SPIN button to select 0.7m