User manual HALCRO LOGIC UNIVERSAL TOUCH SCREEN REMOTE UTSR1

Owner's Manual Universal Touch Screen Remote creen UTSR1 Docking Station tation Rev 1.1 820-6110-0008 Table of Contents Universal Touch Screen Remote ................. . 3- 21 een .................. Key Features .............................................................. 3 Optional Features ...................................................... 3 Specifications ............................................................. 5 Battery Installation and Charging...............................7 3 Your Halcro L ogic U TSR1 inte grate s your home s Hal ogi int Infrare d re mote controls, to deliver instant audiovisual nfr ote liv ins act action. Key Featur es ature · Pre-Programmed with learning capability · 9-in-1 remote (replace HALCRO dm 8/10, HALCRO · Learn up to 240 commands · EL backlit touch screen panel with intelligent light sensor for power saving V OL+ V OLL+, L-) Operating the Remote ....................................... 8 tin ...................................... . Panel Calibration ........................................................ 8 Hot Keys ..................................................................... 9 Hard Keys................................................................... 9 Key Tone .................................................................... 9 Backlight .................................................................... 10 IR Codes Library........................................................ 10 Configuration/Setting Up the Unit ........................... 10 SSP, CD, TV, SAT TV, CBL TV, DVD, AUX 1 & AUX2) H+, H-, · 5 useful hard keys for direct access ( , CH+ CH- Advanced Set-Up ............................................. 13 ............................................ . Edit ............................................................................. 13 Preference................................................................. 15 Remote Setting......................................................... 15 Smart ......................................................................... 18 Clone......................................................................... 20 PC Link....................................................................... 21 Interactive Help Screen ............................................ 21 ,,) · 3 touch screen shortcuts ( · Set up by code entering, device brand name search and library code search maximum · 10 programmable smarts, each with 32 steps in · Device name and function keys editing, moving, deleting and restoring used commands · Custom page for personal set up and frequently · Remote-to-remote copy function · Volume `punch through' control for TV, HALCRO Pre-amplifier and HALCRO SSP Docking Station .......................................... 22- 25 tio ......................................... . 22Key Features ............................................................ 22 Specifications ........................................................... 22 Quick Charger Function .......................................... 24 Remote Advanced Editing via Computer.............. 24 Maintenance ............................................................ 25 Troubleshooting ......................................... 26- 27 ootin ........................................ . 26UTSR1........................................................................ 26 Docking Station........................................................ 27 · nteractive help screen · Security password lock · Real time clock · Battery level indicator uto power off · C/DC power charger · Device Code List ........................................ 28- 39 ice ....................................... . 28Preamp..................................................................... 28 Surround Sound Processor .................................... 28 TV .............................................................................. 28 SAT/CBL ................................................................... 34 CD ............................................................................. 37 DVD ........................................................................... 38 Optiona l Featur es nal ature · Docking Station for quick battery charging · Computer link (PC link) for special key layout and function via USB connection to PC · Perform PC software upload and download Service & Warranty .................................... 40- 42 ice ................................... . 40Service Information.................................................. 40 Warranty Information................................................ 41 Warranty Registration Form.................................... 42 Remote Control 1. 2. 3. 4. 5. Infra-red Lens Green LED Indicator Battery Level Meter Current Time Current Mode 6. Touch Screen Panel 7. Short Cut Keys 8. Hard Keys 9. Connection Jack 10. Battery Compartment 5 Spec cati Specificat ions · Operation System: · Integrated preprogrammed and learning infra-red remote control system Compatibility: Preprogrammed with code library of HALCRO dm 8/10 (Preamplifier), HALCRO SSP, Compact Disc Players (CDs), Televisions (TVs), Satellite/Digital Satellite Receivers (SAT TVs), Cable Converters (CBL TVs) and Digital Video Disc Players (DVDs) Memory Capacity: 240 learning commands Memory retention after battery disconnection: Non-volatile and permanent memory Display Panel: Monochrome touch screen LCD Resolution: 320 x 80 pixels EL Backlighting: Blue-Green EL backlighting with light sensor Operating Distance: 8 Meters (25 feet) Power Requirement: 4 x AAA size NiMH rechargeable batteries Charging Time: Approximately 17 hours Dimensions: 220 x 51 x 25 mm Weight: 165g (without batteries), 215g (with batteries) Included Accessories: AC/DC power adaptor (DC9V, 400mA, 3.6VA) x 1, Connector x 1 (for charging purpose), 4 x AAA size NiMH rechargeable batteries Optional Accessories: Halcro Logic Docking Station ­ Quick charger, PC Link software for MS Windows 98SE, Windows 2000, Windows NT, Windows XP and USB Cable 1 2 3 4 5 · · 6 · · · · · · · · · 7 8 10 · 9 Remote Control Note: Both the Halcro Logic UTSR1 and Docking Station comply with limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 7 Batt er y Installation and Char gin g atte tallati and harg Your Halcro Logic UTSR1 is supplied with 4 x AAA NiMH rechargeable batteries, a connector and a charging adaptor. We recommend you charge your batteries over night (10 hours) before 1st time use. The battery meter (top-left corner of LCD) will empty to indicate when the batteries require recharging. To install the batteries, open the battery cover; follow the polarity symbol shown in battery compartment, place the batteries inside and then replace the cover. · Reorient or relocate the receiving antenna · Increase the separation between the equipment and receiver · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected · Consult the dealer or an experienced radio/TV technician for help "Modifications not authorized by the manufacturer may void users authority to operate this device" To recharge batteries, put the power adaptor into AC wall outlet, insert the DC jack to the connector, then connect to the socket at the bottom of the remote. It takes approximately 14 to 16 hours to fully charge the batteries. Note: The Battery icon is not shown when in Menu mode. The unit is designed for optimum operation with original batteries. Do NOT connect charging adaptor and connector when using the non-original batteries. To avoid data loss, Do NOT attempt remote setup when batteries are weak. Remote Control 9 Note: If your Halcro Logic UTSR1 does not respond, you can reset the remote by pressing the RESET key inside the battery compartment (see illustration). This product may need to be manually reset under high electrostatic discharge. Operatin g th e Remote pera t After inserting the batteries, you will be prompted by the main page, which shows all the devices and functions for selection. · Tap HOME at any time to jump to this page. If remote is inactive for approximately 60 seconds, it will go to sleep mode and shut down the display. Simply touch the screen panel to activate the unit. (Note: When in sleep mode, the hard key section is still available for command) · Tap any device icon on screen to enter corresponding device mode. The LCD shows a remote key platform · Tap a key directly to send out corresponding infrared command · Tap PAGE at bottom of screen to change command pages · Tap HOME to return to main page · There will be no label or symbol for an empty key (Note: these keys are available for learning, please refer to learning section of this manual for details.) MENU to set up the unit · Tap Hot Keys There are 3 Hot keys on the bottom of LCD display, · · · HOME Jump to main page MENU Access main setup menu for configuration/setting MU TE Volume mute function Panel Calibration Please follow the below instruction for calibration of the Halcro Logic UTSR1. If you experience any incorrect response from the touch screen, please recalibrate the unit. Har d Keys ard There are 5 hard keys that transmit IR command corresponding to device selected. · · · · · Tap MENU to set up the unit Tap REMOTE SETTING TTI Tap CAL IBRATION BRA Follow the described procedure from the screen display Tap BACK to go back to the HOME page · · · · · CH+ CHVOL+ VOL- Power ON/OFF Program up or Channel up Program down or Channel down Volume up Volume down K ey T on e When you tap any key, there is a short audible beep. User can enable/disable this function from main menu setting (for details, please refer to Re mote Se tting ote tting section in this manual.) Remote Control 11 Dual Signal Learning ­ If you find that a Learn command only works occasionally for your audiovisual equipment, your original remote control may contain ay dual signals. Please follow the below steps to reprogram these commands. Backligh t acklig There are two separate EL backlights for LCD screen and hard keys, and will be turned ON separately. Backlight will be turned ON for 5 seconds (factory default setting) after a key is pressed, and user can disable this function. (For details, please refer to ote tting Re mote Se tting section in this manual.) · Tap L e arning from Setup menu · Select a device which you would like to carry the command keys (e.g. TV) IR Codes Librar y odes rary To setup a code, tap MENU once then select a device to setup, choose a setup method. User can setup by learning key command from an original remote control, entering a code number, browsing through brand name list, or searching through the whole library. Refer to separate Code List for IR code number of different device. · Tap a key to be learnt from the Halcro Logic UTSR1 · Aim the original remote to the front of the Halcro · · · Con figura tion /Settiin g Up the Un it urat /Sett Tap items: Me nu then choose any one of the following nu, · Logic UTSR1. Press and hold the key until Halcro Logic UTSR1 responds with a successful message (approx. 5 seconds) Edit the key name or just tap OK to confirm Tap the same key on the Halcro Logic UTSR1 Again aim the original remote to the front of the Halcro Logic UTSR1. Press and hold the same key until Halcro Logic UTSR1 responds with a successful message Edit the key name or just tap OK to confirm Se tup ­ setup the pre-programmed code or learn key command. · Tap SETUP from main menu · Select one of following setup methods Note: The optimum receiving distance is 5 to 8cm for remote learning. If you have any reported problem during the learning process, adjust the distance and try again. 5-8 cm Lea r ni ng ­ learn or copy a key command from an original remote control to Halcro Logic UTSR1 · Tap L e arning from Setup menu · Select a device where you would like to carry the command keys (e.g. TV) · Tap a key to be learnt from the Halcro Logic UTSR1 · Aim an original remote to the front of Halcro Logic UTSR1. Press and hold the key until Halcro Logic UTSR1 responds with a successful message (approx. 5 seconds) · Edit the keyname or just tap OK to confirm · Tap another key to continue learning of the rest of the useful commands MENU to return to main menu, or tap · Tap HOME to return to main page Brand Name ­ setup pre-programmed code by N selecting a brand name. · Turn on your device you wish to install before start this setup procedure. (e.g. TV) Name · Tap Brand Name from Setup menu · Select a device (e.g. TV) · A brand name list in alphabetical order will be displayed. Tap or to browse the list, or tap a character to access to a brand name. (e.g. `H' for Halcro) (e.g. Halcro) · Tap a brand name from the list, it will be highlighted Remote Control 13 · Tap test keys on LCD screen or any of hard keys to test the selected code · If you have missed the last code, tap · · · Tap to search next code, or sent at the same time command will be · Tap to skip previous code · Tap Back to cancel and return to previous menu page for selection of other brand name. (Follow the above steps again) once to skip backward Tap Back to cancel and return to previous menu page Tap OK to confirm and exit the setup · Tap OK to confirm and exit the setup Note: If you have reached the end of code, you will be toit. prompted to continue for Auto-Se arch or Ex it For details of Auto-Search setup, please refer to AutoSearch Setup section in this manual. Note: When a code is set to a device, the learned command and key name of that device will be lost, and restored to pre-programmed command. Some codes do not have Power command. These codes may not be detected by using Auto-Search. User is advised to use Te st key to test other keys. During auto-searching, user can access any of the hard keys to test the command. Enter Code ­ setup pre-programmed code by entering code number. (Halcro Logic UTSR1 is preloaded with numerous control codes for most popular AV equipment; you can refer to the enclosed code list for your devices.) Advanc ed Set-Up anced Set Edit This function allows you to rename, move or delete key/device label. Tap MENU then tap ED IT and choose any one of the following items: · Tap Ente r Code from Setup menu · Select a device (e.g. TV) · Tap numeric digit to enter code number (check your code from the code list, e.g. 0021) De · Tap Delle te to delete the last entered digit (if you have mistyped a number) page · Tap Back to cancel and return to previous menu · Tap OK to confirm the input · Tap Te st Key on LCD screen or any of hard key to test the corresponding function Key Na me - rename key label · Tap KEY NAME from Edit menu · Select a device · Select a key to be edited · Tap ABC , ?!À , or i for quick access to different · Tap OK to confirm and exit the setup Auto Sea r ch - setup pre-programmed code by searching through the library. · Turn on your device before starting this setup procedure (e.g. TV) · Tap Auto Se arch from Setup menu · Select a device (e.g. TV) once and then repeat until your device is · Tap switched off. Then, press OK to save the code. Or you can tap the TEST key to test the device during setup groups of keys (Character, Symbol or Graphic), and tap or to access different pages of each group of keys · Tap a character/symbol/graphic from the page · Tap D EL ETE to erase last entered character/symbol/graphic · Tap BACK to ignore and return to previous page · Tap OK to confirm and exit editing Note: The number of characters input depends on the corresponding key size Remote Control D evic e Na me - rename device label ice EVI · Tap D EVICE NAME from Edit menu Select a device · · Tap ABC , ?!À , or i for quick access to different 15 Pr eferenc e nce Tap MENU then tap P REFERENCE and choose any one of the following items: unc Thr P unch Through ­ set up device punch through for Volume Control, Volume + / - and Mute. · Tap PU NCH THROU GH from Preference menu · Select a source device (e.g. HALCRO dm 8/10) · Select a target device (e.g. DVD) groups of keys (Character, Symbol or Graphic), and tap or to access different pages of each group of keys · Tap a character/symbol/graphic from the page · Tap D EL ETE to erase last entered character/symbo /graphic · Tap BACK to ignore and return to previous page · Tap OK to confirm and exit editing Note: Maximum input of 7 characters Note: For punch through, Vol +, Vol - and Mute will be punched through to the selected device. Custom Custom P age ­ set up a user custom page · Tap CU STOM PAGE from Preference menu · Select your keys from different devices for custom page Move Key - move key location (exchange keys · · · · position) Tap MOVE KEY from Edit menu Select a device Select a key to be moved, tap OK to confirm Select a destination, tap OK to confirm. The position of the 2 selected keys will then be exchanged MENU to exit Move Key mode and return to main menu · Select a device where a key to be copied to custom page (e.g. TV) page (e.g. ) · Select a key command to be copied to custom · Tap YES to confirm the selection · Tap to select other key to create new command or tap MENU to exit and return to main menu · Select a key to continue or tap Move D evice ­ move device location EVI · Tap MOVE D EVICE from Edit menu Select a device to move, tap OK to confirm · · Select a destination, tap OK to confirm. The Note: Custom Page is a group of keys that allow the user to copy key commands from different devices, access custom pages from the HOME page, view the device attribute of a key (tap the header CU STOM P AGE once to toggle display device name and key name) and if a key is deleted or re-named on original device, it is also changed in Custom Page. position of the 2 selected devices will then be exchanged Remote Settiing Sett Tap MENU then tap REMOTE SETTING and TTI choose any one of the following items: Clo Clock ­ adjust clock Curre Curre nt Tim e ­ adjust current time Tap Clock from Remote Setting menu Clo Tap Set to adjust clock Enter four digits, first two digits represent hour and second two digits represent minutes (24 hour format is used.) · Tap OK to confirm and exit the setting · Select a device to continue or tap MENU to exit Move Device mode and return to main menu D el ete Key ­ delete a key De · Tap Delle te Key from Edit menu · Select a device · Select a key to be deleted, tap YES to confirm MENU to exit · Select a key to continue or tap Delete Key mode and return to main menu · · · · Remote Control 17 One Device ­ clear learned command of all keys of a device. · Tap to select a device · Tap Yes to confirm or tap No to abort All Devices - clear all learned commands of all devices. Dev · Tap All De vices · Tap Yes to confirm or tap No to abort Ke y Re name ­ clear user renamed key label and restore to factory default. One Key ­ restore user renamed key label of a single key. · Tap to select a device · Tap to select a key · Tap Yes to confirm or tap No to abort One Device ­ restore all user renamed key label of a device. · Tap to select a device · Tap Yes to confirm or tap No to abort All Devices - restore all user renamed key label of all devices. Dev · Tap All De vices · Tap Yes to confirm or tap No to abort De vice Re name ­ clear user renamed device label Dev and restore to factory default. One Device - restore a single user renamed device label and restore to factory default. · Tap to select a device · Tap Yes to confirm or tap No to abort All Devices - restore all user renamed device label and restore to factory default. Dev · Tap All De vices Tap Yes to confirm or tap No to abort · Move Key ­ clear and restore user setting about key movement. One Device ­ clear the setting of key movement of a device and restore to factory default. · Tap to select a device · · · · · D ay of Week ­ adjust day of week Tap Clock from Remote Setting menu Clo Tap Set to adjust date Tap or to select day of week Tap OK to confirm and exit the setting Bee p Sound ­ turn beep sound On/Off eep Sound Sound · Tap Beep Sound from Remote Setting menu · Tap Enable to turn on beep sound · Tap D isable to turn off beep sound L CD ­ set up LCD related function ff: · L ight Auto Off select backlight auto turn off at 5 · Sec, 10 Sec or 15 Sec Back lig Back light Control: select an option of backlight control method, By Sensor, Always On or Always Off. ssw P assw ord - create/enable or disable password In order to keep your personal setting of the Halcro Logic UTSR1 secure, you can activate the password function for remote setting protection. · Enter password, max. 5 characters · Re-enter password for confirmation · Tap D EL ETE to delete last character · To disable password, give a blank input (no characters) to password field Note: Universal password is AAAAA Reset D efa ult ­ reset user setting to factory default. efa Warning: Please make sure it is necessary to perform this function. Your Halcro Logic UTSR1 will be reset to factory pre-loaded setting and all the learned signals/custom setting will be erased. Cle Cle ar L e arning ­ to clear learned command and restore keys to default command. One Key ­ to clear learned command and restore keys to default command · Tap to select a device · Tap to select a key · Tap Yes to confirm or tap No to abort Remote Control 19 Tap MENU then tap Smart and choose any one NU, of the following items: Add Ne w Smart ­ create a new smart command. · Tap Yes to confirm or tap No to abort All Devices - clear all settings of key movement of all devices and restore to factory default. Dev · Tap All De vices · Tap Yes to confirm or tap No to abort Move De vice - clear the setting of device movement Dev and restore to factory default. Dev · Tap Move De vices · Tap Yes to confirm or tap No to abort De le te d Key ­ restore deleted keys. Del One Key ­ restore a single deleted key · Tap to select a device · Tap to select a key · Tap Yes to confirm or tap No to abort One Device ­ restore all deleted keys of a device. · Tap to select a device · Tap Yes to confirm or tap No to abort All Devices ­ restore all deleted keys of all devices. Dev · Tap All De vices · Tap Yes to confirm or tap No to abort All To De fault ­ restore all user settings to factory Def default. · Tap Yes to confirm or tap No to abort · Select an empty smart key · Tap ADD KEY to select a device and a key to add it into smart list · Tap ADD D EL AY to add a delay time between key · · · command (maximum delay is 20 seconds) Select an item from the command list and tap MOVE UP and MOVE D OWN to re-order the sequence of that item, or tap D EL ETE to remove that item from the list Tap TEST to test the function of Smart Tap OK to confirm Edit Smart ­ edit an existing smart key · Select an existing smart · Tap ADD KEY to select a device and a key to add it into smart list · Tap ADD D EL AY to add a delay time between key command (maximum delay is 20 seconds) · Select an item from the command list and tap MOVE UP and MOVE D OWN to re-order the sequence of that item, or tap D EL ETE to remove that item from the list Tap TEST to test the function of Smart Tap OK to confirm · · Del De le te Smart ­ delete a smart key Note: All user settings will be lost (except clock and password). Default function do not clear clock setting and password. · Select an existing smart · Tap OK to confirm · Tap BACK to abort Re name Smart - to rename label of a smart key · Select an existing smart · Tap a character from the touch screen · Tap D EL ETE to last entered character · Tap BACK to ignore and return to previous page · Tap OK to confirm Sta tus ­ show information of the unit. · Display software version, code number of each · Tap device and other useful information or for more information or tap Back to ote tting return to Re mote Se tting menu Smart Halcro Logic UTSR1 comes with 10 editable SMART programs each with a maximum 32 key steps. With RT, the help of SMART you can program a group of commands and time delay to execute in a chain of IR signals simply by the press of SMART button. Note: When a Smart is executed, press a hard key l-) (e.g. , CH+ , CH -, Vol+ , Vol- to stop the signal transmission. User can set maximum 32 steps (including delay) for each smart program. The maximum delay time is 20 seconds. Remote Control 21 Note: All user settings will be over-written at receiving end by sending remote. Do NOT interrupt the linking during sending and receiving data. Be sure to keep two remotes within 5 to 8cm during the copy process for better performance. C l on e This function is used to copy user setting to another MENU then tap Clone NU, Clo Halcro Logic UTSR1. Tap and choose any one of the following items: Note: Before you perform this function, please make sure that you have two (2) Halcro Logic UTSR1s. You have to identify which unit is the sender and which one is the receiver. The sender is the unit which contains data that will be transferred to another Halcro Logic UTSR1 (receiver unit). The receiver is the unit which will copy the signals from the sender. Please keep both sender and receiver units face to face at a distance of 5 to 8cm during the whole cloning process. Copy One De vice ­ copy all user settings of a single opy Dev device from the sender to the receiver unit PC L in k To connect your Halcro Logic UTSR1 with a computer NU, to download/upload data, Tap MENU then choose P C L ink. ink. Note: To enable PC-to-remote data upload/download function, you must use the Halcro Docking Station. Interac tive Help Screen ract creen In menu mode, there is a Help icon ? on the top right corner of screen. It provides help information for each sub-level of the menu. · On the receiver unit, tap Re ce ive opy Dev ce, · On the sender unit, tap Copy One De vice then tap to select a device (e.g. TV), all user settings in the selected device will be sent out via the IR linking from the sender to the receiver unit opy Dev Copy All De vice s ­ copy all user settings of all devices from the sender to the receiver unit IMP ORTANT NOTE: Do not drop or apply any shock to the unit. If the unit does not work properly, press Re set key once to restart. (Reset key is located inside the battery compartment). If password is set, user needs to enter password for accessing main menu. Enter AAAAA if you forget the password. · On the receiver unit, tap Re ce ive opy Dev es, · On the sender unit, tap Copy All De vices all user settings will be sent out via the IR linking from the Clo sender to the receiver unit, except Clock and ssw P assw ord will be sent out via IR linking Re ce ive ­ receive data for Clone function (receiver unit has to select this function in order to start cloning) Enter into receiving mode, ready for receiving incoming data. 5-8 cm Docking Station Be fore ope rating the Halcro L ogic D ock ing Station, ope ing Hal ogi ing Sta ple ase re ad this manual. his nua 1. 2. 3. 4. Docking Station Remote Holder Connection Pins Release Button 5. LED Indicator 6. Power Connector 7. USB Jack 23 Key Featur es ature · Fast charging device for your Halcro Logic UTSR1 · Connecting your Halcro Logic UTSR1 to home · · · · · · · computer system for remote advanced editing and data back up (PC Link) LED indicator for charging status display USB Cable included for PC connection 6 7 Spec cati Specificat ion s Power Requirement: Charging Time: Dimensions: Weight: Included Accessory: DC 9V, 400mA, 3.6VA 3-4 hours 225 x 100 x 45mm 130g approx. USB Cable 1 2 3 4 5 Docking Station 25 Quick Char ger Funct ion harger Functi · Make sure that your Halcro Logic UTSR1 is installed · · · · · · · with 4xAAA NiMH rechargeable batteries and remove the rubber protector Make sure you have the DC power adaptor from the Halcro Logic UTSR1 package Put the power adaptor into AC wall outlet, insert the DC jack to the power connector of the Docking Station Now, slide your Halcro Logic UTSR1 onto the Docking Station until the connection pins are locked The Green LED of the Docking Station lights up. It takes approximately 3 to 4 hours to fully charge the remote When the charging process is completed, the Green LED of the Docking Station will be turned off Press the Re le ase button of the Docking Station to release the Halcro Logic UTSR1 · Run the Halcro Editor software from your computer system Note: For operating the Halcro Editor software, please follow the instruction manual from the software package. Main tenanc e nance · Do not expose your Docking Station to dust, · · · strong sunlight, humidity, high temperature, or mechanical shock Do not use corrosive or abrasive cleansers on your Docking Station Keep the unit dust free by wiping it with a soft, dry cloth Do not disassemble your Docking Station Remote Advanc ed Editing via Computer anced · Make sure that your computer is loaded with one of the following operating systems: Windows 98SE, Windows 2000, Windows NT or Windows XP Download the Halcro Editor software from www. halcro.com. Install the program and reboot your system Make sure your Halcro Logic UTSR1 is connected with the Docking Station (See Quick Charge Function, point 4) Connect the supplied USB cable to the USB jack of the Docking Station and one of the available USB connectors of your computer system Activate the P C L ink function on the Halcro Logic UTSR1 by tapping Me nu and then, select P C L ink · · · · Troubleshooting 27 W h a t i s SMAR T ? Make sure the provided rechargeable batteries are inserted with correct polarity and are fully charged. Try pressing the Re set button inside the battery compartment. (Refer to page 9 for details) Try another code available on the code list or go through the Auto Se arch to locate another possible code. OR use the L e arning function. (Refer to page 10 for details) Your original remote may carry dual signal commands. (Refer to page 11 for details) Make sure the selected key type is identical. You cannot exchange key position with different key type. (Refer to page 14 for details) (Refer to page 16 for details) Activate the P assw ord ssw function to lock your remote. (Refer to page 16 for details) The factory preloaded password is AAAAA Make sure you have selected either By Se nsor or Alw ays On in the Remote Setting menu. (Refer to page 15 for details) To perform this function, you must have 2 Halcro Logic UTSR1s. (Refer to page 20 for details) Using the programmed SMART button will execute a series of commands. (Refer to page 18 for details) In order to perform this function, you must have a Halcro Logic Docking Station and the corresponding computer software. (Refer to page 21 for details) U T SR 1 My Halcro L ogic U TSR1 is Hal ogi not w ork ing. ing What is P C L ink ? ink ins lle ode I have installe d a code but the re mote is not ote w ork ing or only partly ing nly w ork s w ith my de vice. Docking Stat ion tati My Halcro L ogic D ock ing Hal ogi ing Sta Station doe s not charge doe my re mote. ote. Make sure that your Docking Station is connected properly with the Halcro Logic UTSR1. Check whether your Halcro Logic UTSR1 is loaded with packaged NiMH rechargeable batteries and are inserted with correct polarity. Make sure that you have connected the DC power supply with your Docking Station and an available AC outlet. Please refer to page 24 Remote Advanced Editing via Computer. Make sure you have activated the PC Link function from the Halcro Logic UTSR1. opi rigina I have copie d my original re mote to Halcro L ogic ote Hal ogi U TSR1 but found that und some commands only mma nly w ork occasionally. ccas lly cannot I cannot move a k e y to anothe r location. oth cat can tor How can I re store my factory se tting? actory tting can How can I pre ve nt some one from e diting or ing changing the se ttings? ing tting gotte I have forgotte n my passw ord. ssw The ack lig The back light of the L CD is not w ork ing. ing can nne How can I conne ct my Hal Halcro L ogic U TSR1 w ith ogi my compute r syste m? syst Note: The Halcro Logic UTSR1 and Docking Station contain no user serviceable parts. For all service requirements please contact your dealer. W h at i s C L ONE ? Device Code List 29 Cathay CCE Centurion Century CGE Citizen Clatronic Colortyme Concerto Condor Craig Crosley Crown Curtis Mathes Daewoo Dansai Dantax Dawa Daytron Decca Deitron Desmet Diamant Digiline Dixi Drean Dual Dual-TEC Dumont Dux Dynatron Elbe Elcit ELG Elin Elite Elta Emerson Envisio Erres ESC Etron Euroman Europa Europhon Exquisit Family Life Ferguson Fidelity Finlux First Line Fisher Flint Formenti Fortress Fraba Friac Frontech Funai Galaxi Galaxis 1021 1021 0411 1001 0841 0351 0711 0361 0351 1021 0251 0841 1021 0161 0291 1021 1041 1021 1021 0271 1021 1021 1021 1021 0331 1021 0891 0901 0841 1021 1021 1021 1001 1021 1021 1021 0331 0021 0101 0361 1021 1021 0331 1021 1021 0671 1021 1021 0711 0821 0841 0841 0171 1021 0441 1001 1021 1021 0711 0711 1021 1021 P r ea m p Model Halcro dm8/dm10 Code 0002 1021 1041 0361 1021 Surr oun d Sound Processor urround Soun d sso Model Halcro SSP100/SSP80 1041 Code 0007 1041 1001 1041 0361 0301 TV Model A.R. Systems Accent Admiral Agef Aiko Aim Akai Akiba Akito Akura Alba Allstar Amplivision Amstrad Anam Anam National Anitech Ansonic AOC Aristona ASA Asberg Atlantic Audiosonic Audioton Autovox AWA Bang & Olufsen Basic Line Bauer Baur Beko Beon Best Bestar Blaupunkt Blue Sky BPL Brinkmann Brionvega Bruns BSR Bush Candle Carad Carena Cascade Casio Code 1021 1021 1001 1001 1021 1021 0331 1021 1021 1021 0431 1021 1041 0481 0251 1021 1021 1021 0361 1021 1001 1021 1021 0711 1041 1001 1021 0991 1021 0441 0661 1021 1021 1041 1021 0911 1021 1021 1021 1001 1001 0841 0751 0351 1021 1021 1021 1021 0331 1021 0671 1021 0841 1021 1021 1041 1021 1021 1001 1021 1021 1031 1041 1031 1041 1021 1041 0061 0111 0071 1001 0081 1021 0091 1001 1051 0841 1041 1021 1021 1011 1041 1021 1041 0921 1021 1001 1021 0841 0841 1041 0841 1021 1001 1001 1041 1021 1021 0361 1041 Device Code List GBC GE GEC Geloso Gemini Genexxa Goldstar Goodmans Goodmans/Tashiko Gorenje Gradiente Graetz Granada Grandin Grundig Hanseatic Hantarex Hantor Harwood Hauppauge HCM Highline Hinari Hit Hitachi Hornyphone Hypson Iberia ICE Imperial Indiana Inno Hit Innovation Interfunk Internal Intervision Irradio Isukai ITS ITT ITT Nokia ITV Jensen JVC Kaisui Karcher Kendo Kennedy Kenwood Kneissel Kolster Konka Korpel Korting Kosmos Lecson Lenco Leyco Leyeo LG Liesenkotter 0841 0131 0271 0841 0391 0431 0031 1041 1021 0011 1041 1021 1021 0671 1021 0671 1001 0671 1021 1021 1021 1021 1021 0841 1001 0181 1021 1021 1021 1021 1021 1021 0671 0951 0841 1021 1021 0851 1021 1021 0751 0751 1021 0311 0001 1021 1021 1021 0841 0361 1021 1021 1021 1021 1001 1021 1021 1021 1021 0711 1021 1021 0161 0671 0201 1021 Lifesat Lifetec Loewe Loewe Opta Logik Luma Lumatron Lux May Luxman Luxor Lyco Madison Magnadyne Magnafon Magnasonic Magnavox Manesth Manhattan Marantz Marelli Mark Matsui Maximal Mediator Medion Melectronic Memorex Mercury Metz MGA Micromaxx Minoka Mitsubishi 1041 Mivar Montgomery Morgan's MTC Multitec Multitech NAD Naiko Nakimura NEC Neckermann NEI Netsat Neufunk New Tech Nikkai Nikko Noblex Nokia Nordmende Novatronic Oceanic Okano Opera Optimus Optonica Orbit 0951 0951 1001 0661 0381 1021 1021 1021 0351 0841 0711 1021 0671 0671 0031 0341 0581 1021 1021 0221 1001 1021 0271 0841 1021 0951 1011 0331 1021 0881 0361 0951 1021 0221 1001 0671 0351 1021 0351 1021 0671 0551 1021 1021 0241 0821 1021 1021 1021 1021 0271 0031 1021 0751 1021 1021 0841 1021 1021 0551 0541 1021 1011 1011 0671 1021 1021 0681 31 1031 1041 1021 0121 0351 0411 1021 0271 0841 1001 0841 0871 1021 1021 1021 0951 1031 0961 1041 1021 0391 0601 0401 1021 0411 0421 0351 0361 1021 0331 1021 0861 0351 1021 0841 1021 0961 1021 0351 1001 0561 1021 0321 1011 1031 1021 0381 0571 1041 0851 0961 1001 1041 0861 0861 1011 1021 1021 0571 0561 1021 1041 0571 0751 1021 0361 1021 1011 1041 1041 0841 0841 0931 0931 0261 1041 1041 0281 0751 0351 0841 0361 1001 1021 1021 1041 1031 1041 0431 0861 1021 0841 0931 0941 0971 1041 1041 1041 Device Code List Orion Orline Osaka Osaki Osio Otto Versand Palladium Palsonic Panama Panasonic Panavision Pathe Cinema Penny Perdio Perfekt Philco Philips Phoenix Phonola Pilot Pioneer Pionier Plantron Prandoni-Prince Prandoni-Promce Profex Profitronic Proline Prosonic Protech Proton Provision Pulser Pye Quasar Quelle R-Line Radialva Radiola Radiomarelli RadioShack Radiotone RCA Realistic Recor Rectiligne Rediffusion Redstar Reflex Revox Rex RFT Roadstar Robotron Rodex Royal Lux Saba Saisho Salora 0841 1021 0861 0271 1021 0751 1001 1021 1021 0191 1021 1031 0161 1021 1021 0361 1021 0401 1001 1001 1001 1021 0511 1041 1021 0671 0671 0841 1021 1021 1021 0711 0351 1021 0351 1001 0251 0641 1021 1021 1021 1001 0541 1021 0051 0491 0541 1021 1021 0841 1021 1021 1021 0891 1001 1021 1001 1021 1041 0671 0331 0821 1021 Sambers Sampo Samsung 1021 1011 1041 1021 Sansui Sanyo Save SBR Schneider Sears SEG SEI Seleco Sharp Siam Siarem Siemens Siera Siesta Signature Silva Silver Simpson Singer Sinudyne Sky Solavox Sonitron Sonneclair Sonoko Sontec Sony Soundwave Squareview Standard Starlite Stern Strato Sunkai Sunstar Sunwood SuperTech Supra Sylvania Symphonic Tandberg Tandy Tatung Tcm Teac Tech Line Techwood Teknika Telecor Telefunken Telefusion Telegazi Telemeister Telesonic Telestar 0671 0361 0331 0861 1021 0171 1031 1021 1021 0891 0161 1021 0841 0891 0461 1021 0671 0861 1021 1041 0351 1021 0711 0581 1001 0841 1021 0861 1041 1021 0711 1021 0371 1021 0481 1021 1021 0891 1021 1021 1021 1021 1021 0351 0361 0481 0681 0271 0271 0951 1011 1021 0351 0351 1021 0691 0791 1021 1021 1021 1021 1021 33 0861 0841 1021 0341 1021 0231 1041 0351 1041 0271 0361 0711 0751 1021 0251 1021 0901 0171 1001 0901 0471 0841 0911 1021 0351 1021 0541 1001 0921 0481 0521 0351 0361 0521 0531 0611 0621 0581 1041 0651 1021 1021 1021 0551 0591 0691 1041 0601 0701 1001 0721 1021 0381 1021 1021 1001 1021 1041 1021 1041 0841 0501 1021 1021 1041 0451 0631 1021 1011 1021 0901 1021 1021 1041 0141 0531 0151 0181 0411 0441 0761 0431 0671 1021 0581 0881 1021 0591 0601 0931 1041 0901 1031 0381 0731 0811 0571 0741 0981 0771 1021 0781 1041 1001 0841 Device Code List Teletech Tempest Tennessee Tensai Tera Tevion Thomson Thorn Thorn-Ferguson TMK Tokai Toshiba Trans Continens Transonic Triumph Uher Ultravox Unic Line United Universum Univox Vector Research Vestel Vexa VideoSystem Vidikron Vision Vortec Voxson Waltham Wards Watson Watt Radio Wega Weltblick Wharfedale White Westinghouse Xrypton Yamaha Yamishi Yokan Yoko Zanussi Zenith 0331 1021 1021 1021 0501 1021 0691 0791 1011 0711 0351 1021 0351 1021 1011 0671 1021 0841 1021 1021 0711 1001 0361 1021 1021 1021 0211 1021 1021 1001 1021 0361 0591 1021 0841 0841 1021 1021 1021 1021 0361 1021 1021 1021 0891 0011 1021 Beko 0963 British Sky Broadcasting (BskyB) BT 1033 Cabletime 0163 Canal Digital 0943 Canal Satellite 0943 Canal + 0863 Canalt 0943 Carena 0963 Clyde Cablevision 0193 Colour Voice 0303 Comtronics 0213 Conrad 1063 Cyrus 0923 D-Box 1073 DNT 0923 Dual 1113 Eagle Comtronics 0273 Eastern 0063 Echostar 0783 Electricord 0203 Electus 0263 Ferguson 1113 Finlandia 0963 Finlux 0963 Flint 0963 GE 0113 GEC Cable System 0193 General Instrument 0793 Gold Box 0943 Gooding 1023 Goodmans 0403 Granada 1053 Grundig 0973 Hamlin 0633 Hirschmann 1063 Hisawa 0963 Hitachi 0753 HTS 0783 Hughes Network Systems 0813 ITT 1053 ITT Nokia 1163 Jerrold 0253 0803 JOK 1033 JVC 1023 Kathrein 0923 Luxor 1053 Magnavox 0003 Mamm 0293 Manhattan 0963 Marantz 0923 Maspro 0973 Matsui 1023 MediaSat 0943 Memorex 0003 Minerva 1023 Mitsubishi 1053 Mivar 0953 Movie Time 0143 Myryad 0923 1143 35 0953 0731 1021 1021 0741 0771 0781 0343 0273 0521 1021 1021 1041 1001 0751 0801 1213 1253 1021 0943 1011 1021 1021 1041 1053