User manual HANDSPRING VISOR PRISM

VisorTM Handheld User Guide Macintosh Edition Copyright Copyright © 2000 Handspring, Inc. All rights reserved. Portions copyright © 1998-2000 Palm, Inc. or its subsidiaries. All rights reserved. Handspring, Springboard, Visor, the Handspring logo, and the Springboard logo are trademarks of Handspring, Inc., and may be registered in some jurisdictions. Palm Computing, Graffiti, HotSync and Palm OS, are registered trademarks, and the HotSync logo, Palm, and the Palm Computing Platform logo, are trademarks of Palm, Inc., or its subsidiaries. All other trademarks are the property of their respective owners. Disclaimer and limitation of liability Handspring, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this handbook. Handspring, Inc. and its suppliers assume no responsibility for any loss or claims by third parties which may arise through the use of this software. Handspring, Inc. and its suppliers assume no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of all important data on other media to protect against data loss. Important: Please read the Handspring End User Software License Agreement before using the accompanying software program(s). Using any part of the software indicates that you accept the terms of the Handspring End User Software License Agreement. Software download available PalmTM Desktop software is supplied on a CD-ROM disc. If you do not have access to a CD-ROM drive for your computer, you can download the Palm Desktop software from www.handspring.com. Page ii VisorTM Handheld User Guide Contents About This Guide ....................................................................................1 Chapter 1: Introduction to Your Visor Handheld .................................3 Getting to know your Visor handheld ...............................................3 What is a Visor handheld? ...............................................................3 System requirements ........................................................................4 Upgrade information ........................................................................4 Visor components .............................................................................6 Charging the battery .............................................................................9 Connecting the cradle .......................................................................9 Tapping and typing ............................................................................11 Tap with the stylus to get things done .........................................11 Elements of the handheld interface ..............................................12 Opening applications .....................................................................13 Using menus ....................................................................................14 Four ways to enter data ..................................................................17 Customizing your handheld..............................................................21 Palm Desktop software ..................................................................22 Using your handheld with another PIM .....................................23 Installing a Springboard module ..................................................24 Chapter 2: Entering Data in Your Visor Handheld .............................25 Using Graffiti writing to enter data ..................................................25 Writing Graffiti characters .............................................................25 Graffiti tips .......................................................................................27 The Graffiti alphabet .......................................................................28 Writing capital letters .....................................................................29 Writing numbers .............................................................................29 Graffiti numbers ..............................................................................30 Writing punctuation marks ...........................................................30 Writing symbols and extended characters ..................................31 Writing accented characters ..........................................................32 Accent strokes ..................................................................................32 Additional non-English characters ...............................................32 Navigation strokes ..........................................................................33 Graffiti ShortCuts ............................................................................33 Using the onscreen keyboard ...........................................................34 Using your computer keyboard ........................................................35 Importing data .....................................................................................35 Using an external keyboard ...............................................................36 Contents Page iii Chapter 3: Managing Your Applications .............................................37 Using the Applications Launcher..................................................... 37 Selecting applications ..................................................................... 37 Switching between applications ................................................... 37 Categorizing applications .............................................................. 37 Changing the Applications Launcher display ............................ 39 Choosing preferences ......................................................................... 40 Installing and removing applications .............................................. 40 Installing add-on applications ...................................................... 40 Installing games .............................................................................. 42 Removing applications .................................................................. 43 Removing Palm Desktop software ............................................... 43 Security................................................................................................. 45 Assigning a password .................................................................... 45 Changing or deleting a password ................................................ 46 Locking your handheld ................................................................. 46 Recovering from a forgotten password ....................................... 47 Chapter 4: Overview of Basic Applications.........................................49 Date Book ............................................................................................. 50 Date Book Plus .................................................................................... 51 Address ................................................................................................ 52 To Do List............................................................................................. 53 Memo Pad ............................................................................................ 54 Calculator............................................................................................. 55 CityTime............................................................................................... 56 Expense................................................................................................. 57 Chapter 5: Common Tasks ....................................................................59 Creating records.................................................................................. 59 Editing records .................................................................................... 60 Entering text .................................................................................... 60 Edit menu ......................................................................................... 60 Deleting records .................................................................................. 62 Other ways to delete records ........................................................ 62 Purging records................................................................................... 63 Exchanging and updating data: HotSync operations.................... 64 Performing a HotSync operation for the first time .................... 64 Categorizing records .......................................................................... 66 System-defined and user-defined categories ............................. 66 Finding records ................................................................................... 69 Looking up Address records ........................................................ 70 Using Find ....................................................................................... 71 Using Phone Lookup ...................................................................... 72 Page iv Visor Handheld User Guide Sorting lists of records ........................................................................74 Making records private ......................................................................75 Hiding and masking private records ...........................................75 Attaching notes ....................................................................................77 Choosing fonts .....................................................................................78 Chapter 6: Application Specific Tasks .................................................79 Date Book .............................................................................................80 Scheduling an event ........................................................................80 Rescheduling an event ...................................................................84 Setting an alarm for an event ........................................................84 Scheduling repeating or continuous events ................................85 Changing the Date Book view .......................................................88 Working in Week View ..................................................................88 Working in Month View ................................................................90 Working in Agenda view ...............................................................90 Spotting event conflicts ..................................................................91 Date Book menus ............................................................................92 Date Book Plus.....................................................................................95 Working in Week View with Text ................................................95 Working in Year View ....................................................................96 Working in List View .....................................................................97 Working with floating events ........................................................97 Working with To Do items ............................................................99 Using the Daily Journal ................................................................100 Using templates .............................................................................101 Using snooze alarms .....................................................................102 Selecting the default Date Book ..................................................102 Date Book Plus menus ..................................................................102 Address ...............................................................................................111 Creating an Address entry ...........................................................111 Duplicating an entry .....................................................................112 Selecting types of phone numbers ..............................................113 Changing Address Entry details .................................................113 Address menus ..............................................................................114 To Do List ...........................................................................................116 Setting priority ...............................................................................116 Checking off a To Do item ...........................................................117 Changing To Do item details .......................................................117 Setting a due date ..........................................................................118 To Do Show Options .....................................................................119 To Do List menus ..........................................................................120 Memo Pad...........................................................................................121 Reviewing memos .........................................................................121 Page v Memo Pad menus ......................................................................... 122 Calculator........................................................................................... 123 Selecting the Calculator mode .................................................... 123 Using the Basic Calculator buttons ............................................ 123 Displaying Recent Calculations .................................................. 124 Using the Advanced Calculator mode ...................................... 124 Using the Advanced Calculator buttons ................................... 125 Creating a custom view ............................................................... 134 Calculator menus .......................................................................... 135 CityTime............................................................................................. 136 Setting your home city ................................................................. 136 Selecting remote cities .................................................................. 137 Adding cities ................................................................................. 137 CityTime menus ............................................................................ 138 Expense............................................................................................... 139 Changing the date of an Expense item ...................................... 140 Entering receipt details ................................................................ 140 Customizing the Currency pick list ........................................... 141 Show Options ................................................................................ 143 Expense menus ............................................................................. 144 Chapter 7: Communicating Using Your Handheld............................145 Managing desktop E-Mail away from your desk ........................ 145 Setting up Mail on the desktop ................................................... 146 Synchronizing Mail with your E-Mail application .................. 146 Opening the Mail application on your handheld .................... 146 Viewing e-mail items ................................................................... 146 Creating e-mail items ................................................................... 148 Looking up an address ................................................................ 150 Adding details to e-mail items ................................................... 151 Storing e-mail to be sent later ..................................................... 155 Editing unsent e-mail ................................................................... 155 Draft e-mail .................................................................................... 156 Filing e-mail ................................................................................... 157 Deleting e-mail .............................................................................. 158 Removing e-mail from the Deleted folder ................................ 158 Purging deleted e-mail ................................................................. 158 Message list options ..................................................................... 159 HotSync options ............................................................................ 161 Creating special filters ................................................................. 162 Truncating e-mail items ............................................................... 166 Mail menus .................................................................................... 167 Beaming information........................................................................ 168 Page vi Visor Handheld User Guide Chapter 8: Advanced HotSync® Operations ....................................171 Selecting HotSync setup options.....................................................171 Customizing HotSync application settings ...................................174 IR HotSync operations ......................................................................175 Preparing your computer for infrared communication ..........175 Configuring HotSync Manager for infrared communication .176 Performing an IR HotSync operation .........................................177 Returning to cradle HotSync operations ...................................177 Conducting a HotSync operation via modem...............................178 Preparing your computer ............................................................178 Preparing your handheld .............................................................179 Selecting the conduits for a modem HotSync operation .........181 Performing a HotSync operation via a modem ........................182 Creating a user profile ......................................................................183 Chapter 9: Setting Preferences for Your Handheld .........................185 Viewing preferences .........................................................................185 Buttons preferences...........................................................................186 Pen preferences ..............................................................................186 HotSync buttons preferences .......................................................188 Connection preferences ....................................................................188 Connection Types ..........................................................................189 Setting modem configurations ....................................................190 Digitizer preferences.........................................................................192 Formats preferences ..........................................................................193 Country default .............................................................................193 Time, date, week start, and numbers formats ...........................193 General preferences...........................................................................194 Auto-off delay ................................................................................194 System, alarm, and game sounds ...............................................194 Network preferences and TCP/IP software..................................195 Selecting a service .........................................................................195 Entering a user name ....................................................................196 Entering a password .....................................................................197 Selecting a connection ..................................................................198 Adding telephone settings ...........................................................198 Connecting to your service ..........................................................201 Creating additional service templates .......................................202 Adding detailed information to a service template .................202 Creating a login script ..................................................................205 Deleting a service template ..........................................................207 Network preferences menu commands .....................................207 TCP/IP troubleshooting ...............................................................208 Owner preferences ............................................................................209 Page vii ShortCuts preferences ...................................................................... 210 Creating a ShortCut ...................................................................... 210 Editing a ShortCut ........................................................................ 211 Deleting a ShortCut ...................................................................... 211 Appendix A: Maintaining Your Handheld .........................................213 Caring for your handheld................................................................ 213 Battery considerations...................................................................... 214 Resetting your handheld ................................................................. 215 Performing a soft reset ................................................................. 215 Performing a warm reset ............................................................. 216 Performing a hard reset ............................................................... 216 Appendix B: Troubleshooting Tips.....................................................219 Operating problems.......................................................................... 219 Tapping and writing problems....................................................... 220 Application problems....................................................................... 221 HotSync problems ............................................................................ 222 Beaming problems ............................................................................ 226 Password problems .......................................................................... 227 Technical support ............................................................................. 228 Appendix C: Non-ASCII Characters for Login Scripts.......................229 Use of ^char ....................................................................................... 229 Carriage return and line feed .......................................................... 229 Literal characters............................................................................... 230 Warranty and Other Product Information .......................................231 Handspring, Inc. Limited Warranty .............................................. 231 Handspring, Inc. End User Software License Agreement .......... 234 GNU Library General Public License ........................................ 236 FCC Statement................................................................................... 243 Canadian RFI Statement .................................................................. 243 Acknowledgments............................................................................ 244 Index ....................................................................................................245 Page viii Visor Handheld User Guide About This Guide Welcome to the VisorTM handheld computer. This guide is designed to help you get up and running quickly on your handheld. It describes all you need to know about how to use your Visor handheld and the applications that come with it. It walks you through: s s s s Locating all the parts of your handheld Viewing and entering data Using your handheld with your computer Personalizing your handheld with your own preference settings After you become familiar with the basic functionality of your Visor handheld, you can use the rest of this guide as a reference for less common tasks, for maintaining your Visor handheld, and also as a source of information if you have problems operating it. Page 1 Page 2 Chapter 1 Introduction to Your Visor Handheld This chapter explains the physical buttons and controls on your Visor handheld computer, how to use your Visor handheld for the first time, and how to use HotSync® technology to synchronize your Visor handheld and PalmTM Desktop software. Getting to know your Visor handheld What is a Visor handheld? With your Visor handheld, you will no longer have trouble getting to meetings and appointments on time, remembering people's names and personal details, or keeping track of all the items on your to do list. The Visor handheld can help you improve your track record in all these areas, both at work and at home. You can enter all your schedule details in Date Book Plus so you can view them by the day, week, month, year, or in list format; you can even set an alarm to remind you of important meetings. Keep all your contact names, addresses, phone numbers, and other details in Address, so you can find them as soon as you need them. Add your tasks to To Do list, prioritize them so you don't overlook them, and assign them a due date. To make sure you don't lose any of this important information, you can synchronize your data with Palm Desktop software on your computer so you always have a backup copy. You can set different levels of security for your Visor handheld so unauthorized eyes cannot view your data. When you are out of the office, track your expenses for your expense reports. You can write, edit, and view your e-mail, and then synchronize your e-mail with your desktop E-Mail application when you return to your office. Chapter 1 Page 3 System requirements To install and operate Palm Desktop software, your computer system must meet the following requirements: Minimum requirements s MacOS 8.1 or later (for USB cradle) --or-MacOS 7.53 or later (for serial cradle) Apple Macintosh or compatible computer with a PowerPC processor 8 MB RAM (memory) minimum, 16 MB recommended 25 MB available hard disk space VGA monitor or better CD-ROM drive Mouse USB port (for USB cradle) Serial port (for serial cradle) s s s s s s s Optional equipment s s Modem (such as a SpringboardTM modem) Springboard expansion modules Upgrade information If you already own a Palm OS® handheld, Handspring recommends that you install the version of Palm Desktop software that comes with your Visor handheld into the same folder as your current Palm Desktop software. When you install the new version in the same folder as the previous version, all your data is preserved. If you use another personal information manager (PIM), you still need to install Palm Desktop software in order to update the HotSync Manager on your computer. You perform HotSync operations in exactly the same way, so you can quickly synchronize your old data with your new handheld. To upgrade: 1. Synchronize your old handheld with your old Palm Desktop software. This ensures that the latest information from your handheld is on your desktop computer. Page 4 Introduction to Your Visor Handheld 2. (Optional) To ensure against any data loss, go to the folder that stores Palm Desktop software, copy your user name folder, and store the copy outside the Palm Desktop software folder. 3. Follow the installation instructions in "Installing Palm Desktop software" later in this chapter. Be sure to install the new software in the same folder as the old software. 4. To prepare for the first HotSync operation that synchronizes your new handheld with your new Palm Desktop software, open Palm Desktop software, open the HotSync menu, and then choose Conduit Settings. Note: Be sure your user name appears in the box at the top of the Custom Conduit Settings dialog box. If not, select your user name. 5. For all conduits, click Conduit Settings and select the option Macintosh overwrites handheld. Then click OK. See "Customizing HotSync application settings" in Chapter 8 for more information. 6. Place your new handheld in the cradle and press the HotSync button. If the User dialog box appears, select your user name. 7. Compare the applications on your old and new handhelds. 8. Beam any third party applications that did not transfer from your old handheld to your Visor handheld, or install them from the original files. Each handheld must have a unique name After you complete the upgrade process described above, you have two handhelds with the same name. This is an undesirable situation. Each handheld must have a unique name in order to prevent unexpected results during HotSync operations and other complications. We strongly recommend that you perform a hard reset on your old handheld. See "Performing a hard reset" in Appendix A for details. A hard reset not only erases all data from the old handheld; it also erases the name and makes that handheld a clean slate, ready to receive a new name. The next time you perform a HotSync operation with this old handheld, you are asked to give it a name. Be sure to give it a unique name. Chapter 1 Page 5 Visor components Locating front panel controls Stylus Screen Graffiti® writing area Application buttons Power button and brightness control LED Microphone Scroll buttons Stylus Slides in and out of the slot in the back panel of the handheld. To use the stylus, remove it from the slot and hold it as you would a pen or pencil. Displays the applications and information stored in your Visor handheld. It is touch-sensitive and responds to the stylus. The area where you write letters and numbers using the Graffiti alphabet. See Chapter 2 to learn how to write Graffiti characters. Visor handheld screen Graffiti writing area Page 6 Introduction to Your Visor Handheld Power button and brightness control Turns your handheld on or off. If your Visor handheld is turned off, pressing the power button turns the unit on and returns you to the last screen you viewed. If your Visor handheld is turned on, pressing the power button turns the unit off. Holding the power button down for about two seconds opens the brightness control panel where you can adjust the appearance of the screen. To adjust the brightness, drag the slider or tap the arrows to increase or decrease the brightness. To fine tune the brightness, press the scroll buttons on the front panel of your handheld. LED charge indicator Indicates the status of the battery as it charges. When your handheld is in the cradle, the LED blinks while the battery charges and stays on after the battery is charged. Activates the individual applications that correspond to the icons on the buttons: Date Book Plus, Address, To Do List, and Memo Pad. See "Buttons preferences" in Chapter 9 for details on reassigning these buttons to activate any application on your Visor handheld. Tip: If your Visor handheld is turned off, pressing any application button activates the handheld and opens the corresponding application. Application buttons Scroll buttons Displays text and other information that extends beyond the area of the Visor handheld screen. Pressing the bottom scroll button scrolls down to view information below the viewing area, and pressing the top scroll button scrolls up to view the information above the viewing area. Microphone For use with Springboard expansion modules that support this feature. Chapter 1 Page 7 Locating back panel components Springboard expansion slot protector IR port Reset button USB and serial connector Springboard expansion slot protector IR port Slides in and out of the Springboard expansion slot. You can replace the slot protector with a Springboard expansion module to add features to your handheld. Uses infrared technology to transmit data to and receive data from other Palm OS handhelds. See "Beaming information" in Chapter 7 for more information. You can also use the IR port to update the information between your handheld and computer using HotSync technology. See "IR HotSync operations" in Chapter 8 for details. Under normal use, you should not have to use the reset button. See Appendix A for information about when and how to use the reset button. The connector that connects your handheld to the cradle, which in turn connects to a USB port or serial port on your computer. This allows you to update the information between your handheld and computer using HotSync technology. Reset button USB and serial connector Page 8 Introduction to Your Visor Handheld Charging the battery To use your Visor handheld, you must connect the cradle and charge the battery. See "Battery considerations" in Appendix A for tips on extending the life of the battery. Connecting the cradle The cradle that comes with your Visor handheld enables you to charge your handheld battery and to synchronize the information on your Visor handheld with your Palm Desktop software using HotSync technology. Note: If your computer does not have a USB port, or it uses MacOS 8.0 or earlier, you need a serial cradle to connect to your computer. You can purchase a serial cradle from www.handspring.com. To connect the cradle: 1. Plug the AC adapter cable into the back of the cradle cable connector. 2. Plug the cradle cable connector into the USB port or serial port on your computer. USB cradle and port Note: If you are unsure about the exact location of the USB port or serial port on your computer, refer to the manual supplied with the computer. 3. Plug the AC adapter into a wall outlet. Chapter 1 Page 9 Serial cradle and port To charge the battery: 1. Connect the cradle as described in the previous steps. 2. Place your handheld in the cradle. LED Note: The LED blinks while your handheld charges. When the LED stays on, your handheld is charged. It takes about 90 minutes to fully charge a drained battery. Introduction to Your Visor Handheld Page 10 Tapping and typing Tap with the stylus to get things done Like using a mouse to click elements on a computer screen, using the stylus to tap elements on your handheld screen is the basic action that gets things done on your handheld. The first time you start your Visor handheld, setup instructions appear on the screen. These instructions include a calibration screen, or digitizer. Calibration aligns the internal circuitry of your handheld with its touch-sensitive screen so that when you tap an element on the screen, the handheld can detect exactly which task you want to perform. Important: Always use the point of the stylus for tapping or making strokes on the handheld screen. Never use an actual pen, pencil, or other sharp object to write on the handheld screen. With your handheld turned on, you can tap the handheld screen to perform many operations, such as the following: s s s s s Open applications Choose menu commands Initiate a global Find operation Select options in dialog boxes Open the onscreen keyboards Just as you can drag the mouse to select text or move objects on your computer, you can also drag the stylus to select text. You can also use the stylus to drag the slider of any scroll bar. Chapter 1 Page 11 Elements of the handheld interface Menu bar Pick list Check box Icons Command buttons Menu bar Command buttons Icons A set of commands that are specific to the application. Not all applications have a menu bar. Tap a button to perform a command. Command buttons appear in dialog boxes and at the bottom of application screens. Tap the icons to open applications Calculator . , menus , , and to find text anywhere in your data abc 123 Check box With the cursor in an input field, tap the dot to activate the alphabetic keyboard. With the cursor in an input field, tap the dot to activate the numeric keyboard. When a check mark appears in a check box, the corresponding option is active. If a check box is empty, tapping it inserts a check mark. If a check box is checked, tapping it removes the check mark. Tap the arrow to display a list of choices, and then tap an item in the list to select it. Pick list Page 12 Introduction to Your Visor Handheld Previous/next arrows Scroll bar Next/ previous arrows Scroll bar Tap the up and down arrows to display the previous and next page of information; tap the left and right arrows to display the previous and next record. Drag the slider, or tap the top or bottom arrow, to scroll the display one line at a time. To scroll to the previous page, tap the scroll bar just above the slider. To scroll to the next page, tap the scroll bar just below the slider. You can also scroll to the previous and next pages by pressing the scroll buttons on the front panel of your handheld. Opening applications You can use the Applications Launcher to open any application installed on your handheld. You can also open the four main applications -- Date Book Plus, Address, To Do List, and Memo Pad -- with the application buttons on the front panel of your handheld. Tip: When you press an application button on the front panel, you have instant access to the selected application. You don't even need to turn on your handheld first. In addition to providing a way for you to open applications, the Applications Launcher displays the current time, battery level, and application category. Chapter 1 Page 13 To open an application: 1. Tap the Applications icon . 2. Tap the icon of the application that you want to open. If you have many applications installed on your Visor handheld, tap the scroll bar to see all of your applications. Tip: To find an application quickly, you can write the Graffiti character for the first letter of its name. The Applications Launcher scrolls to the first application with a name that begins with that letter. You can also assign application icons to different categories. See "Categorizing applications" in Chapter 3. Using menus Menus on your handheld are easy to use. Once you have mastered them in one application, you can use them the same way in all other applications. The menus of each application are illustrated in the section on that application in Chapter 4. The Edit menu is described in "Editing records" in Chapter 4. To open the menu bar: 1. Do one of the following: s Open an application (such as Memo Pad) and then tap the s Menu icon . Tap the inverted tab at the top of any application's screen (except Calculator). Page 14 Introduction to Your Visor Handheld Tap inverted tab Tap the Menu icon In this example, three menus are available: Record, Edit, and Options. The Record menu is selected and contains the commands New Memo, Delete Memo, and Beam Memo. Choosing a menu After you open the menu bar for an application, tap the menu that contains the command you want to use. The menus and menu commands that are available depend on the application. Also, the menus and menu commands vary depending on which part of the application you're using. For example, in Memo Pad, the menus are different for the Memo list screen and the Memo screen. Graffiti menu commands Most menu commands have an equivalent Graffiti Command stroke, which is similar to the keyboard shortcuts used to execute commands on computers. The command letters appear to the right of the command names. To use the Graffiti menu commands, the menu bar must be closed. Menu commands Command letters Chapter 1 Page 15 To use the Graffiti menu commands: 1. In the Graffiti text area, draw a diagonal line from the lower left to upper right. The Command toolbar appears for about four seconds. Command toolbar 2. Immediately write the corresponding command letter in the Graffiti letter area. For example, to choose Select All in the Edit menu, draw the Command stroke, followed by the letter "s." Tip: If you wait more than three seconds to write the menu command, you need to redraw the Graffiti Command stroke to redisplay the Command toolbar. Command toolbar The Command toolbar provides quick access to frequently used menu commands. The commands available vary based on the active screen. To use the command toolbar: 1. In the Graffiti text area, draw a diagonal line from the lower left to upper right. The Command toolbar appears for about four seconds. Command toolbar 2. Tap the icon for the command you want. Tip: If you wait more than three seconds to tap the icon, you need to redraw the Graffiti Command stroke to redisplay the Command toolbar. Page 16 Introduction to Your Visor Handheld Displaying online tips Many of the dialog boxes that appear on your handheld contain an online Tips icon in the upper-right corner. Online tips anticipate questions you have in a dialog box, provide shortcuts for using the dialog box, or give you other useful information. To display an online tip: 1. Tap the Tips icon . 2. After you review the tip, tap Done. Four ways to enter data There are four ways to enter data into your Visor handheld: s s s Using Graffiti writing Using the onscreen keyboard Entering or importing data in Palm Desktop software and then synchronizing with your handheld Using an external keyboard s Graffiti writing Your Visor handheld includes Graffiti writing software as the primary system for entering text and numbers. With Graffiti writing, you write simple strokes with the stylus and they are instantly recognized as letters or numbers. Chapter 1 Page 17 Write letters here Write numbers here Division marks Your Visor handheld also includes Giraffe, a game you can use to practice Graffiti writing. See "Installing and removing applications" in Chapter 3 for installation instructions. The Memo Pad application is ideal for practicing Graffiti writing. This section explains how to open Memo Pad and use it to practice Graffiti writing. To open Memo Pad: 1. Press the Memo Pad application button 2. Tap New. . Note: A blinking cursor appears on the first line of the new memo to indicate where new text will appear. New memo cursor Tap New Write in Graffiti area See "Using Graffiti writing to enter data" in Chapter 2 for more information. Page 18 Introduction to Your Visor Handheld Onscreen keyboard When you create or edit a record in an application such as Address, you can open the onscreen alphabetic and numeric keyboards to enter data. Tap here for alphabetic keyboard Tap here for numeric keyboard After a keyboard is open, you can tap to open any of the other keyboards, including the international keyboard. See "Using the onscreen keyboard" in Chapter 2 for more information. Note: You cannot enter Graffiti characters while using the onscreen keyboard. Alpha Tab Caps lock Caps shift Tap here to display alphabetic keyboard Numeric International Backspace Carriage return Tap here to display numeric keyboard Tap here to display international keyboard Chapter 1 Page 19 Using Palm Desktop software If you have new records you want to add to your Visor handheld and prefer to use the computer keyboard rather than the onscreen keyboard, enter the data in Palm Desktop software or the PIM you have installed to use with your handheld. After the information is in Palm Desktop software, perform a HotSync operation to synchronize your handheld with your computer. See "Exchanging and updating data: HotSync operations" in Chapter 5 for more information. HotSync button Importing data If you already have data in a database on your computer, you can import it into Palm Desktop software. You can import data stored in computer applications such as spreadsheets and databases, or data from another Palm OS handheld. When you import data, you transfer the records to your Visor handheld without having to enter them manually. See "Importing data" in Chapter 2 for more information. Using an external keyboard You can connect an optional keyboard accessory to the connector on your handheld so you can type data directly into your handheld. External keyboards are very helpful when you need to enter large amounts of data quickly and accurately while you are away from your computer. For more information about external keyboard accessories, go to the web site: www.handspring.com. Page 20 Introduction to Your Visor Handheld Customizing your handheld You can customize your handheld by using the Preferences application. You can enter personal information such as your name and address; change the time and date; view different date and time formats when you travel; turn off sounds; and configure your handheld to work with a modem or network. See Chapter 9 for more information on customizing your handheld. To open the Preferences screens: 1. Tap the Applications icon 2. Tap the Preferences icon . . 3. Tap the category pick list in the upper-right corner of the screen. 4. Tap the Preferences category you want to view. The following procedures for setting the time and date give you an example of how to customize your handheld. You make changes to the time and date in General preferences. To set the current time: 1. Tap the Set Time box. Tap here 2. Tap the up or down arrows to change the hour. 3. Tap each minute number, and then tap the arrows to change them. 4. Tap AM or PM. Note: Your handheld can also display time based on a 24-hour clock. See "Formats preferences" in Chapter 9 for more information. 5. Tap OK. Chapter 1 Page 21 To set the current date: 1. Tap the Set Date box. 2. Tap the arrows to select the current year. Tap arrows to select year Tap to select month Tap to select date 3. Tap a month. 4. Tap the current date. Palm Desktop software Palm Desktop software includes the same main applications as your handheld: Daily Calendar (Date Book), Contact List (Address), Task (To Do List), and Note (Memo Pad). You can use the HotSync feature of this software to back up and exchange data between your handheld and your computer. It is a good idea to back up your data in case something happens to the data on your Visor handheld. Changes you make on your handheld or Palm Desktop software appear in both places after you synchronize. With Palm Desktop software, you can do the following: s Work with your Visor handheld applications on your computer. Palm Desktop software duplicates the Daily Calendar (Date Book), Contact List (Address), Task (To Do List), and Note (Memo Pad) applications on your handheld, so you can view, enter, and modify any data stored on your handheld. Back up the data stored on your handheld with HotSync technology and synchronize the data on your Palm Desktop software. Synchronization is a one-step procedure that ensures your data is always safe and up-to-date. See "Exchanging and updating data: HotSync operations" in Chapter 5 for details. Import and export data, so you can easily transfer data from other desktop applications into any of your main applications. See "Importing data" in Chapter 2 for more information. Print your Palm Desktopinformation on any printer. Introduction to Your Visor Handheld s s s Page 22 Installing Palm Desktop software The following instructions guide you through installing Palm Desktop software. After installation, refer to the online Help in Palm Desktop software for information about how to use the software. Note: You must install the software that comes with your Visor handheld even if you already installed Palm Desktop software for a previous Palm OS handheld. To ensure a safe and uninterrupted installation of Palm Desktop software, please do not simply copy the Palm Desktop software files to your computer's hard disk. You must use the installer to place the files in their proper locations and to decompress the files. To install Palm Desktop software: 1. Exit any open programs, including those that run at startup, and disable any virus-scanning software. 2. Insert the Palm Desktop software CD-ROM into the computer's CD-ROM drive. 3. Double-click the Palm Desktop CD icon on the desktop. 4. Double-click the Installer icon to begin the installation process. 5. Follow the onscreen instructions to complete the installation. Using your handheld with another PIM If you prefer to use another personal information manager (PIM), you can use it if third-party connection software, called a conduit, is available for your PIM. You must install the software that came with your Visor handheld along with the conduit for your PIM to synchronize the data between your handheld and your PIM. For information on conduit software, go to this web site: www.handspring.com. Chapter 1 Page 23 Installing a Springboard module Springboard expansion modules enable you to extend the functions of your handheld. To install a Springboard module, simply remove the slot protector and insert the module in the Springboard expansion slot until the connectors are secure. Page 24 Introduction to Your Visor Handheld Chapter 2 Entering Data in Your Visor Handheld This chapter explains how to enter data into your Visor handheld computer, by writing with the stylus in the Graffiti® writing area, by using the onscreen keyboard, by using the computer keyboard, by using an external keyboard, or by importing data from another application. Using Graffiti writing to enter data Chapter 1 introduced Graffiti writing and briefly described how to use it to enter text in your applications. In this section, you learn the procedures for creating letters, numbers, punctuation, and symbols as well as some Graffiti tips and tricks. Writing Graffiti characters Most people find they can enter text quickly and accurately with only minutes of practice. Graffiti writing includes any character you can type on a standard keyboard. The Graffiti strokes closely resemble the uppercase letters of the regular alphabet, which makes Graffiti writing easy to learn. There are four basic concepts for success with Graffiti writing: s If you draw the character shape exactly as shown in the tables later in this chapter (like the shapes shown in the following diagram), you achieve 100% accuracy. s The heavy dot on each shape shows where to begin the stroke. Certain characters have similar shapes, but different beginning and end points. Always begin the stroke at the heavy dot (you should not create the heavy dot; it is only there to show you where to begin the stroke). Chapter 2 Page 25 s Most characters require only a single stroke. When you lift the stylus from the Graffiti writing area, your handheld recognizes and displays the text character immediately. To accomplish single strokes, some Graffiti strokes are portions of the regular alphabet equivalents. The Graffiti writing area is divided into two parts: one for writing the letters of the alphabet and one for writing numbers. The small marks at the top and bottom of the Graffiti writing area indicate the two areas. Write letters here Write numbers here s Division marks To write Graffiti letters: 1. Tap the screen where you want your text to go. Note: You need to tap above the Graffiti writing area, and must see a blinking cursor before you write the text. 2. Use the tables on the following pages to find the stroke shape for the letter you want to create. For example, the stroke shown below creates the letter "n." Note: There are two different stroke shapes available for some letters. For these letters, choose the one that's easiest for you. Lift stylus here Start stroke at heavy dot As you'll see later, you use the same shape to create both the uppercase and lowercase version of a letter. Page 26 Entering Data in Your Visor Handheld 3. Position the stylus in the left-hand side of the Graffiti writing area. 4. Start your stroke at the heavy dot and draw the stroke shape as it appears in the tables. 5. Lift the stylus from the screen at the end of the stroke shape. That's all there is to it! When you lift the stylus from the screen, your handheld recognizes your stroke immediately and prints the letter at the insertion point on the screen. As soon as you lift the stylus from the screen, you can begin the stroke for the next character you want to write. Important: You must begin the character strokes in the Graffiti writing area. If you do not make Graffiti strokes in the Graffiti writing area, your handheld does not recognize them as text characters. Graffiti tips When using Graffiti writing, keep these tips in mind: s Accuracy improves when you write large characters. You should draw strokes that nearly fill the Graffiti writing area. To delete characters, simply set the insertion point to the right of the character you want to delete and make the backspace stroke (a line from right to left) in the Graffiti writing area. Write at natural speed. Writing too slowly can generate recognition errors. Do not write on a slant. Vertical strokes should be parallel to the sides of the Graffiti writing area. Press firmly. s s s s Chapter 2 Page 27 The Graffiti alphabet Letter A B C D E F G H I J K L M Strokes Letter N O P Q R S T U V W X Y Z Strokes Space Carriage Return Back Space Period tap twice Page 28 Entering Data in Your Visor Handheld Writing capital letters You make capital letters with the same stroke shapes as the basic alphabet characters. To make capital letters, you must first "shift" to caps -- just as you press the Shift key on a keyboard -- and then write the character strokes. Note: Graffiti writing includes a feature that automatically capitalizes the first letter when you create a new sentence or a new record (by tapping New or a blank line). To draw the first letter of a word as a capital letter: s Use the Caps Shift stroke: Caps Shift Tip: When Caps Shift is active, an "up arrow" symbol appears in the lower-right corner of the handheld screen. If you accidentally activate Caps Shift, backspace will cancel it. Caps Shift To enter only capital letters (Caps Lock): s Use the Caps Lock stroke: Caps Lock Tip: When Caps Lock is active, an underlined "up arrow" symbol appears in the lower-right corner of the handheld screen. To return to lowercase, make the Caps Shift stroke. Caps Lock Writing numbers Writing numbers with Graffiti writing is similar to writing letters of the alphabet, except that you make the character strokes on the righthand side (numbers side) of the Graffiti writing area. Chapter 2 Page 29 Graffiti numbers Number 0 1 2 3 4 Strokes Number 5 6 7 8 9 Strokes Writing punctuation marks Graffiti writing can create any punctuation symbol that you can enter from a standard keyboard. All punctuation marks begin with a single tap on the Graffiti writing area. When you make this tap, you activate Punctuation Shift and a dot appears to show it is active. The next stroke you make with the stylus creates a punctuation mark. Punctuation Shift Note: When Punctuation Shift is active, you can make a symbol stroke anywhere in the Graffiti writing area (the letters or numbers side). Page 30 Entering Data in Your Visor Handheld Symbol Period . Comma , Apostrophe ' Question ? Exclamation ! Stroke Symbol Dash -- Left Paren ( Right Paren ) Slash / Dollar $ Stroke Additional Graffiti punctuation @ # % ^ &* < > ­ + = | \ { } [ ] ~ ` ; : " tab Writing symbols and extended characters All symbols and extended characters begin with the stroke in the Graffiti writing area of your handheld: Symbol Shift When the Symbol Shift is active, a slanted shift symbol appears in the lower-right corner of the screen. The next stroke that you make creates the symbol or extended character. Symbol Shift Chapter 2 Page 31 Writing accented characters To create accented characters, draw the stroke normally used to create the letter, followed by an accent stroke. Graffiti writing then adds the accent to the letter. For example, the following diagram shows the strokes required to draw an accented "e." =e Accent strokes a a a a a a Using these accent strokes, you can write the following accented letters: àáâãäåèéêìíîïòóôõöùúûüÿýñ Additional non-English characters You can write the following characters in the lowercase alphabet mode without any special punctuation or shifting: c ae Note: You must write these non-English characters in the left side of the Graffiti writing area. Page 32 Entering Data in Your Visor Handheld Navigation strokes In addition to character symbols, Graffiti writing includes special strokes that you can use to navigate within text or fields in your applications. Command Move cursor right Move cursor left Previous field (Address only) Next Field (Address only) Open Address Record (Address only) Stroke Graffiti ShortCuts Graffiti ShortCuts make entering commonly used words or phrases quick and easy. ShortCuts are similar to the Glossary or Autotext features of some word processors. Graffiti writing comes with several predefined ShortCuts, and you can also create your own. Each ShortCut can represent up to 45 characters. For example, you might create a ShortCut for your name, or for the header of a memo. See "ShortCuts preferences" in Chapter 9 to learn about creating your own ShortCuts. To use a ShortCut, draw the ShortCut stroke followed by the ShortCut characters. When you draw the ShortCut stroke, the ShortCut symbol appears at the insertion point to show that you are in ShortCut mode. ShortCut Chapter 2 Page 33 Your handheld includes the following predefined Graffiti ShortCuts: Entry Date stamp Time stamp Date / time stamp Meeting Breakfast Lunch Dinner ShortCut ds ts dts me br lu di Using the onscreen keyboard You can open the onscreen keyboard anytime you need to enter text or numbers on your handheld. Note that you cannot enter Graffiti characters while using the onscreen keyboard. To use the onscreen keyboard: 1. Open any application (such as Memo Pad). 2. Tap any record, or tap New. 3. Tap "abc" to open the alphabetic keyboard, or tap "123" to open the numeric keyboard. Tap here for alpha keyboard Tap here for numeric keyboard 4. Tap the characters to enter text and numbers. Note: The onscreen keyboard also includes a dialog box for international characters. You can switch among the three dialogs at any time to enter the exact text you need. 5. After you finish, tap Done to close the onscreen keyboard and place the text in the record. Page 34 Entering Data in Your Visor Handheld Using your computer keyboard If you have a lot of data to enter, or prefer to use the computer keyboard, you can use PalmTM Desktop software, or any supported PIM, to enter information. You can then perform a HotSync® operation to synchronize the information on your computer with the information on your handheld. All the main applications on your handheld are available in Palm Desktop software and in most PIMs. Refer to Palm Desktop online Help for more information on entering data on your computer. Importing data If you have data stored in computer applications such as spreadsheets and databases, you can transfer the data to your Visor handheld without having to key it in manually. Save the data in one of the file formats listed below, import it into Palm Desktop software, and then perform a HotSync operation to transfer the data to your handheld. You can import data from any of the following PIM (personal information manager) products. s s s s s s s s s Address Book Plus DateBook Pro DayMaker Dynodex Meeting Maker Now Contact Now Up-to-Date QuickDex TouchBase Pro Palm Desktop software can open Claris Organizer files directly; you do not need to import them. To import data from PIM product files, you must export and save the entire file in text format first. You can import fields from TouchBase Pro, DateBook Pro, DayMaker, and QuickDex files in the proper order. You might have to adjust the field order of other PIM product files you import. You can also import data from a FileMaker Pro database or a ClarisWorks database. In FileMaker Pro, be sure to export the database to the Tab-Separated Text file type. In ClarisWorks, be sure to save the database in ASCII text format and give it a different name so you don't overwrite the original file. Chapter 2 Page 35 You can import data from a Newton that uses Newton Operating System 1.0. Simply use the Newton Connection Kit to export data from the Newton Names file, Date Book Calendar file, and Notepad, and then import the resulting files into PalmTM Desktop software. The Newton Connection Kit does not work with Newton Operating System 2.0. To import data: 1. Export a text file from the other product. 2. Open Palm Desktop software. 3. From the File menu, choose Import. 4. Select the file you want to import. 5. Click Open. 6. In the Import dialog box, check each field name to be sure the correct data moves into the correct fields. To change the order of a field in the file you're importing into, move the pointer over a field name in the Fields In list. When the pointer changes to double arrow, drag the name to a new location. To prevent information from being imported into a field, click the arrow between field names. The arrow changes to a dotted line. To view the information in the file you're importing from, click the Scan Data arrows to see the information in each record. 7. From the Fields pop-up menu, choose the appropriate field. 8. From the Delimiters pop-up menu, choose the appropriate delimiter. The field and delimiter are set automatically if you are importing a Claris Organizer, TouchBase Pro, DateBook Pro, DayMaker, or QuickDex file. 9. Click OK. Using an external keyboard You can connect an optional keyboard accessory to the connector on your handheld so you can type data directly into your handheld. External keyboards are very helpful when you need to enter large amounts of data quickly and accurately while you are away from your computer. Page 36 Entering Data in Your Visor Handheld Chapter 3 Managing Your Applications This chapter explains how to switch between applications on your Visor handheld computer, how to change application settings so they are personalized to your work methods, and how to categorize applications so you view them in related groups. Using the Applications Launcher To open the Applications Launcher, tap the Applications icon . Selecting applications Your Visor handheld is equipped with a variety of applications. All the applications installed on your handheld appear in the Applications Launcher. See "Opening applications" in Chapter 1 for details. Switching between applications When working in any application, tap the Applications icon or press an application button on the front panel of your handheld to switch to another application. Your handheld automatically saves your work in the current application and displays it when you return to that application. Categorizing applications The category feature enables you to manage the number of application icons that appear onscreen in the Applications Launcher. You can assign an application to a category and then display a single category or all your applications. Chapter 3 Page 37 To categorize an application: 1. Tap the Applications icon 2. Tap the Menu icon . . 3. Tap App, and then tap Category. 4. Tap the pick list next to each application to select a category. Tip: To create a new category, tap Edit Categories from the pick list. Tap New, enter the category name, and then tap OK to add the category. Tap OK. 5. Tap Done. To display applications by category: 1. Tap the Applications icon 2. Do one of the following: . Tap the Applications icon repeatedly to cycle through all your categories. Tap the pick list in the upper-right corner of the screen and select the category you want to display. Page 38 Managing Your Applications Changing the Applications Launcher display By default, the Applications Launcher displays each application as an icon. As an alternative, you can choose to show a list of applications. You can also choose to view the same category of applications each time you open the Applications Launcher. To change the Applications Launcher display: 1. Tap the Applications icon 2. Tap the Menu icon . . 3. Tap Options, and then tap Preferences. 4. Tap the View By pick list and select List. 5. Tap OK. To open the Applications Launcher to the last opened category: 1. Tap the Applications icon 2. Tap the Menu icon . . 3. Tap Options, and then tap Preferences. 4. Tap the Remember Last Category check box to select it. 5. Tap OK. Chapter 3 Page 39 Choosing preferences You can set options that affect an entire application in the application's Preferences dialog box. To change preferences for an application: 1. Open an application. 2. Tap the Menu icon . 3. Tap Options, and then tap Preferences. Note: 5. Tap OK. Not all applications have a Preferences command. 4. Make changes to the settings. Installing and removing applications This section explains how to install and remove applications on your Visor handheld and how to remove PalmTM Desktop software from your computer. Installing add-on applications Your Visor handheld comes with the Date Book, Date Book Plus, Address, To Do List, Memo Pad, Expense, Calculator, City Time, and Mail applications installed and ready to use. You can also install additional applications on your handheld, such as games and other software. The Install Handheld Files dialog box makes it easy to install software on your Visor handheld during a HotSync® operation. There are a variety of third-party applications available for your Visor handheld. To learn more about these applications, go to the web site: www.handspring.com. Note: Any game or application that you install on your handheld resides in RAM memory; you can delete them at any time. Page 40 Managing Your Applications To install add-on software on your handheld: 1. Copy or download the application you want to install into the addon folder in your Palm folder on your computer. Note: If the software you download is compressed, you need to decompress it into this folder. If you prefer to place the application into another folder, you need to navigate to that folder before you complete step 5. 2. Double-click the Palm Desktop icon on your desktop. 3. From the HotSync menu, choose Install Handheld Files. Tip: You can also access the Install Handheld Files dialog box by double-clicking any file with a PRC file extension. 4. From the User pop-menu, select the name that corresponds to your Visor handheld. 5. Click Add to List. 6. Select the application(s) you want to install on your handheld. 7. Click Add File. Chapter 3 Page 41 Note: Review the list of applications you selected in the Install Handheld Files dialog box. If you do not want to install an application, select it, and then click Remove From List. (This does not remove the application from your computer; it simply removes it from the list of applications to install.) 8. Close the Install Handheld Files dialog box. 9. Perform a HotSync operation to install the application(s) you selected in step 6. See "Exchanging and updating data: HotSync operations" in Chapter 5 for details. Installing games The CD-ROM also includes several games that you can install with the Install Tool: s s s s s