CDR 20 CD Recorder OWNER'S MANUAL 0 ® Power for the Digital RevolutionTM Table of Contents 3 3 4 5 7 9 10 12 14 14 14 15 15 15 16 16 16 17 17 17 17 18 18 18 18 20 20 21 21 22 22 22 22 22 23 24 Introduction Important Information on CD Recording Safety Information Front-Panel Controls Front-Panel Information Display Rear-Panel Connections Remote Control Functions Installation and Connections CD Recording Basics Disc Types CDR Terminology and Display Messages Playback Basics Loading and Unloading Discs Using the Remote Normal Play Search Track Skip Dual-Play Mode Dual-Deck Operation Time Display Headphone Listening Program Play Programming Play Lists Checking, Editing and Clearing Programmed Play Lists Repeat Play CD Recording Disc Dubbing CD Sync Recording Recording from an External Source Finalizing CD-R and CD-RW Discs Unfinalizing and Erasing CD-RW Discs Unfinalizing a CD-RW Disc Erasing an Entire CD-RW Disc Erasing a Single Track Troubleshooting Guide and Error Messages Technical Specifications Declaration of Conformity We, Harman Consumer International 2, route de Tours 72500 Château-du-Loir, FRANCE declare in own responsibility, that the product described in this owner's manual is in compliance with technical standards: EN 60065:1993 EN 55013/A12/8.1994 EN 55022/5.1995 EN 55020/12.1994 EN 61000-3-2/4.1995 EN 61000-3-3/1.1995 Carsten Olesen Harman Consumer International 08/00 Typographical Conventions In order to help you use this manual with the remote control, front-panel controls and rear-panel connections, certain conventions have been used. EXAMPLE ­ (bold type) indicates a specific remote control or front-panel button, or rear-panel connection jack EXAMPLE ­ (OCR type) indicates a message that is visible on the front-panel information display EXAMPLE ­ (outlined type) indicates a lit indicator in the front-panel information display 1 ­ (number in a square) indicates a specific front-panel control 0 ­ (number in an oval) indicates a button or indicator on the remote ¡ ­ (number in a circle) indicates a rear-panel connection A ­ (letter in a square) indicates an indicator in the front-panel display 2 TABLE OF CONTENS Introduction Thank you for choosing Harman Kardon. The CDR 20 Dual-Deck CD Player/Recorder is a unique product, designed not only to play back your existing library of compact discs, but also to record compact discs from either analog or digital programs. You may feed signals (for recording) to the CDR 20 from external sources such as an A/V receiver, a tuner, a tape deck or a CD player, or you may simply place a CD in one deck, and make a copy using a recordable CD in the other deck. Designed and engineered by Harman Kardon, the CDR 20 is the world's first audio CD recorder with 4x speed capability. This means that it will take only 15 minutes to copy a 60-minute disc. The CDR 20 not only records with the highest speed and quality available but it is also an audiophile CD player. Through the use of audiophile-grade digital-to-analog converters (DACs), the CDR 20's performance rivals the most sophisticated high-end players. Should you wish to bypass the internal DACs and use an external digital processor, a coax-digital output is available. Thanks to the CDR 20's dual-tray design, you may even play back two separate discs at the same time, for parties or multi-room applications. To make CD playback more enjoyable, the CDR 20 also features a wide range of program and repeat functions. Since CD recorders are a relatively new technology, this may be your first CD-R product. Although CD recorders resemble play-only CD machines in many ways, there are some important differences between a standard CD and a CD-R. In addition, making a CD-R recording is also a different process than what you may be familiar with for making audio tape or cassette recordings. For that reason, we encourage you to read through this manual so that you are fully acquainted with the way CD recording works. This small investment in your time will pay major dividends in the enjoyment that will result from proper use of the CDR 20. If you have additional questions about this product ­ its installation or operation ­ that are not answered in this manual, please contact your dealer, who is your best source of local information. You may also contact Harman Kardon via e-mail through our Web site at www.harmankardon.com. Special Features s Dual-Deck CD Player and CD-R/CD-RW Recorder s 4x Dub Speed for Both CD-R and Erasable CD-RW Discs s Audiophile-Grade Digital-to-Analog Converters for Highest Audio Quality s Dual-Play Capability s Extensive Playback Programming Capabilities s Coaxial Digital Inputs and Outputs s Front-Panel Coaxial Digital Input for Use with Portable Devices s Sample-Rate Convertor Allows Use of DAT Players as Digital Source s Ergonomic Remote Control Important Information About CD Recording In order to get the most enjoyment from your new CD-R recorder, please pay special attention to the following sections of the manual that provide information about the special features and capabilities of CD Recorders. s The CDR 20 plays all standard CD audio,CD-R and CD-RW discs but for recording, the CDR 20 uses special CD-R and CD-RW discs designed only for audio use. CD-R discs designed for computer use will not work in the CDR 20. See page 14 for more information on which types of discs are used with the CDR 20. s The last step in making a CD-R and CD-RW recording is the finalization process. Unless this step is properly done, the disc will not work in other players. See page 22 for information on finalizing discs. s Once finalized, CD-R discs will play in any CD player, but CD-RW discs will only play in the CDR 20 and certain other machines. Check the specifications of your CD player if you have questions about compatibility with CD-RW discs. s As with all CD players, except those designed specifically for portable use, you should never move a CD player while there is a disc inside one of the decks. NEVER move the CDR 20 until discs have been removed from both decks. INTRODUCTION 3 Safety Information Important Safety Information Verify Line Voltage Before Use Your CDR 20 has been designed for use with 100- to 240 Volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit. If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your selling dealer before plugging the unit into a wall outlet. Do Not Use Extension Cords We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately by an authorized service depot with cords meeting factory specifications. Handle the AC Power Cord Gently When disconnecting the power cord from an AC outlet, always pull the plug, never pull the cord. If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet. Do Not Open the Cabinet There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service station. CAUTION: The CDR 20 uses a laser system. To prevent direct exposure to the laser beam, do not open the cabinet enclosure or defeat any of the safety mechanisms provided for your protection. DO NOT STARE INTO THE LASER BEAM. To ensure proper use of this product, please read this owner's manual carefully and retain it for future use. Should the unit require maintenance or repair, please contact your local Harman Kardon service station. Refer servicing to qualified personnel only. Installation Location s To assure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product. s Make certain that proper space is provided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet. s Do not place the unit directly on a carpeted surface. s Avoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or heating equipment. s Avoid moist or humid locations. s Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them. Cleaning When the unit gets dirty, wipe it with a clean, soft dry cloth. If necessary, wipe it with a soft cloth dampened with mild soapy water, then a fresh cloth with clean water. Wipe dry immediately with a dry cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide near the unit. Moving the Unit Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet. IMPORTANT NOTE: To avoid damage to the CDR 20 which may not be covered by the warranty, be certain that all discs are removed from the unit before it is moved. Once the CDR 20 is placed installed, discs may be left in the unit when it is turned off, but the unit should NEVER be moved with discs left in either deck. Important Information for the User This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: s Reorient or relocate the receiving antenna. s Increase the separation between the equipment and receiver. s Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. s Consult the dealer or an experienced radio/TV technician for help. Unpacking The carton and shipping materials used to protect your new receiver during shipment were specially designed to cushion it from shock and vibration. We suggest that you save the carton and packing materials for use in shipping if you move, or should the unit ever need repair. To minimize the size of the carton in storage, you may wish to flatten it. This is done by carefully slitting the tape seams on the bottom and collapsing the carton down to a more twodimensional appearance. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag. If you do not wish to save the packaging materials, please note that the carton and other sections of the shipping protection are recyclable. Please respect the environment and discard those materials at a local recycling center. 4 SAFETY INFORMATION Front-Panel Controls ¸ ¯ ~ 0 ^ i Ù Û Ú Ò Ô Ó ( * & 1 2 1 2 3 4 5 6 7 8 9 ) ! 3 4 5 6 @ # $ % ^ & * ( Ó Ô 7 8 9 ) ! @ # $ Ò Ú Û Ù i ^ ~ ¯ ¸ % ^ Record-Deck Display Select Information Display Remote Sensor Play-Deck Display Select Dual-Play Selector Play-Deck Next Play-Deck Previous Play-Deck Pause Play-Deck Play Play-Deck Stop Power Switch Status-Mode Indicator Play Deck Headphone Jack Headphone Level Control Digital Input Play-Deck Open Record Button CD Sync Dubbing Erase Finalize Speed Record-Deck Open Record Deck Analog-Record Level Control Record-Deck Stop Record-Deck Play/Select Record-Deck Pause Record-Deck Next Record-Deck Previous Input Select 1 Power Switch: Press this switch to apply power to the CDR 20. When the unit is first turned on, the Status-Mode Indicator 2 surrounding the switch will turn green. Once the unit has been turned on with this switch, it may be operated from either the front panel or remote control. Press the switch again to turn the unit completely off. 2 Status-Mode Indicator: When the CDR 20 is in the ON mode, this indicator will glow green. When the unit has been placed in the Standby mode by pressing the Power-Off button V on the remote, the indicator will glow amber, indicating that the unit is still connected to the AC main supply and is ready to be turned on from the remote control. 3 Play Deck: This disc deck is used to play back conventional CD discs and ...