User manual HAWKING HI-GAIN HAO15SIP - INSTALLATION GUIDE

HAO15SIP Hi-GainTM 15dBi Outdoor Omni-Directional Antenna Kit HAO15SIP 2.4GHz Hi-Gain 15dBi Outdoor Omni-Directional Antenna Kit PACKAGE CONTENTS: One 15dBi Omini-Directional Antenna 50cm Extension Cable (N-Plug to Rev. SMA Plug) TNC Adapter Surge Protector (N-Plug to N-Jack) Waterproof Tape Mounting Kit Quick Installation Guide Extend the Distance of your Wireless Devices up to 2 miles The HAO15SIP Hi-Gain Outdoor 15dBi Omni-Directional Antenna Kit is a heavy-duty, weather proof, high powered antenna for extending the range of your 802.11b and 802.11g WiFi devices. Whether your application requires extending a wireless signal from one building to another or simply from one end of a house to the other, the Hi-Gain Directional Antenna Kit from Hawking is the perfect solution. The power rating of WiFi antennas is measured in terms of decibels (dBi). The HAO15SIP boosts the antenna power of standard antennas from a minimal 2dBi to a staggering 15dBi. This results in extended wireless distances of up to 2 miles.* Whether extending the wireless network from one corporate building to another, or simply from the front house to the back house, the Outdoor Antenna Kits provide wireless users with a high powered solution to extend their wireless network. The Outdoor Omni-Directional Antenna emits a powerful amplified signal over a 360 degree radius., delivering a strong multidirection signal from an Access Point or a Bridge. If you have multiple locations or buildings where you would like to integrate your wireless network, simply place the HAO15SIP in between the buildings with your Acess Point. It is most effective when placed at the top of buildings or in the center of large rooms. The HAO15SIP also comes with a mounting kit, connectors, and a surge protector. Installation of the HAO15SIP is simple and straight forward. It is compatible with most wireless devices (Access Points, Routers, Bridges and Network Adapters) on the market with removable external antennas. The Hawking Antenna comes equipped with N-Type, RP-SMA, RP-TNC connectors to support a wide range of wireless devices. For those devices that use adapters not included in the packaging, please visit the Hawking Technologies website for a selection of specific connectors for your device. Features 2.4 Ghz Frequency - Works with popular Wireless Standards Reverse SMA Plug - Compatible with most Access Points/Adapters TNC Adapter is included for Cisco & Linksys Routers A 15dB External Outdoor Omni-Directional Antenna - Ensures optimal coverage Supports all network operation systems Setup is quick and simiple System Requirements: One Wireless 2.4GHz 802.11b/g Device with a Removable External Antenna Connector Type: Reverse SMA or Reverse TNC *Results may vary due to different operating environments. Hi-Gain Outdoor 15dBi Omni-Directional Antenna Kit HAWKING TECHNOLOGIES, INC USA: Irvine, California Sales: 888.662.8828 or 949.790.0800 Email: sales@hawkingeurope.com EUROPE: Rotterdam, The Netherlands Sales: 31-10-245-1600 Email: sales@hawkingeurope.com Fax: 949.790.0880 Email: customersupport@hawkingtech.com Fax: 31-(0)10-245 1616 Email: customersupport@hawkingeurope.com HAO15SIP Hi-Gain 15dBi Outdoor Omni-Directional Antenna Kit Preinstallation - The HAC30N outdoor cable is sold seperately and required for outdoor installation Step 1 - Connect Extension Cable to your Access Point Remove the original antenna from your Wireless Access Point and attach the Rev. SMA connector from the Extension Cable (white color cable) to your Access Point's antenna connector Step 2 - Install the Surge Protector After you have attached the Extension Cable Connect to HAC30N to your Wireless Access Point, install the Surge Protector to the N-Plug at the opposite end of the Extension Cable. Step 3 - Connect to the Antenna and Protect it from weather damage Once you have successfully grounded your Surge Protector, connect the other end to the N-Plug Extension cable (HAC30N). Then, please take the Water-Proof Tape and tape the metal connectors that are exposed to the outdoors to prevent any damage from weather. After your antenna is completely connected, safely mount your antenna to a pole or wall. (See QIG for instructions on how to assemble for wall or pole mounting). RELATED PRODUCTS Outdoor HAC30N 30 ft. Outdoor N-Plug Hi-Gain Antenna Cable HAO9SIP Hi-Gain 9dBi Outdoor Omni-Directional Antenna Kit HAO9SDP Hi-Gain 9dBi Outdoor Directional Antenna Kit HAO14SDP Hi-Gain 14dBi Outdoor Omni-Directional Antenna Kit Indoor HA12W Hi-Gain 12dBi Indoor Window Antenna HAO15SC Hi-Gain 15dBi Indoor Corner Antenna HAI7SIP Hi-Gain 7dBi Indoor Omni-Directional Antenna HAI7MD Hi-Gain 7dBi Compact Indoor Directional Antenna Network Specifications: IIEEE 802.11b/g Electrical Properties Frequency: 2.4~2.4835 Ghz Impedence: 50 Ohms Nominal Gain: 15dBi Radiation: Omni Polorization: Vertical H-Plan:360º E-Plan: 30º Mechanical Properties Connector: RP-SMA and N-Plug Material Properties Color:White & Silver Body: Brass & Ni Plating Pin: Phosphor Bronze Gold Insulator:Teflon or Delrin Dimensions: 48 (H) x 1 (r) in (w/out joint) Weight: 2.2 lbs Warranty 1 year Specifications are subjet to change without notice. ©2007 Hawking Technologies, Inc. All Rights Reserved.