Detailed instructions for use are in the User's Guide.
LIST NO. E438
ELECTRIC TOOL PARTS LIST
HAMMER DRILL Model DH 24PB
2000 · 9 · 29 (E2)
27A
44
45 46
35A
32A
501
502 503
504
72A
--- 1 ---
PARTS
ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27A 28 29 30 31 32A 33 34 35A 36 37 38 39 40 42 43 44 45 46 * * * 47 47 47 48 49 * 50 CODE NO. 306-345 306-992 306-343 306-342 984-118 939-547 314-876 301-654 314-881 981-328 959-155 314-878 314-877 307-688 307-690 690-4DD 986-147 959-156 959-154 314-882 301-677 301-678 301-679 948-310 301-671 301-672 301-680 301-669 301-670 301-668 301-666 303-977 314-880 301-664 315-161 301-659 301-660 301-661 992-912 306-990 301-663 626-VVM 876-796 608-DDM 982-631 360-446U 360-446E 360-446F 314-879 994-343 340-398C FRONT CAP GRIP BALL HOLDER HOLDER SPRING WASHER (B) RETAINING RING FOR D20 SHAFT (10 PCS.) GEAR COVER TAPPING SCREW (W/FLANGE) D5X35 O-RING SPRING (H) STEEL BALL D3.97 (10 PCS.) O-RING CHANGE LEVER OIL SEAL SLEEVE BALL BEARING 6904DDPS2L RETAINING RING FOR D37 HOLE STEEL BALL D7.0 (10 PCS.) STEEL BALL D5.556 (10 PCS.) CYLINDER SECOND GEAR SPRING (A) WASHER (A) RETAINING RING FOR D30 SHAFT SECOND HAMMER O-RING (B) O-RING (I.D. 10.5) STRIKER O-RING (A) PISTON PISTON PIN WASHER (C) INNER COVER SPRING (B) GEAR.SHAFT SET WASHER (B) CLUTCH SPRING CLUTCH O-RING (S-8) RECIPROCATING BEARING SPACER BALL BEARING 626VVC2PS2L O-RING (P-22) BALL BEARING 608DDC2PS2L WASHER (A) ARMATURE ASS'Y 110V-115V ARMATURE 220V-230V ARMATURE 240V FAN GUIDE ASS'Y RUBBER BUSHING STATOR 110V-115V DESCRIPTION NO. USED 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1
PARTS * : ALTERNATIVE----- 2
DH 24PB REMARKS
INCLUD.45,46,53
INCLUD.49
9 --- 00
PARTS
ITEM No. 50 50 51 * * * 52 52 52 CODE NO. 340-398E 340-398F 314-914 314-913 314-919 314-920 DESCRIPTION STATOR 220V-230V STATOR 240V INTERNAL WIRE (A) (BLACK) INTERNAL WIRE (A) (GRAY) INTERNAL WIRE (B) (W/CR UNIT) INTERNAL WIRE (B) (W/CR UNIT) NO. USED 1 1 1 1 1 1 FOR GBR (110V) FOR NZL,GBR (230V),SAF,ITA,FRG,FRA, REMARKS
DH 24PB
* *
HOL,DEN,FIN,SWE,AUT,NOR,ESP,SUI,KOR 53 54 55 56 * 57 58 59 * * 60 60 61 62 63 64 65 * * * 66 67 67 981-373 314-917 314-922 314-912 314-915 301-653 314-891 314-916 314-921 994-273 302-488 999-072 955-203 608-VVM 314-889 BALL BEARING 608VVC2PS2L HOUSING NAME PLATE INTERNAL WIRE (A) (RED) INTERNAL WIRE (A) (WHITE)
TAPPING SCREW (W/FLANGE) D4X20 (BLACK)
1 1 1 1 1 3 1 1 1 1 1 2 2 1 2 1 1 FOR NZL,GBR,SAF,ITA,FRG,FRA,HOL,DEN, FIN,SWE,AUT,NOR,ESP,SUI,KOR FOR CORD
HANDLE COVER SPEED CONTROL SWITCH (2P) 100V-115V SPEED CONTROL SWITCH (2P) 220V-240V NOISE SUPPRESSOR EARTH TERMINAL
CARBON BRUSH (AUTO STOP TYPE) (1 PAIR)
BRUSH HOLDER HITACHI LABEL TUBE (D) INTERNAL WIRE (B) (BLUE) CHOKE COIL (A) BLUE
* *
68 68
314-918 314-923
INTERNAL WIRE (B) (BROWN) CHOKE COIL (A) BROWN
1 1 FOR NZL,GBR,SAF,ITA,FRG,FRA,HOL,DEN, FIN,SWE,AUT,NOR,ESP,SUI,KOR
69 70 * * * * * * * * * * 71 71 72 72 72 72 72 72 72 72
984-750 937-631 953-327 938-051 500-214Z 500-249Z 500-409Z 500-423Z 500-439Z 500-440Z 500-245Z 500-390Z
TAPPING SCREW (W/FLANGE) D4X16 CORD CLIP CORD ARMOR D8.8 CORD ARMOR D10.1 CORD CORD CORD CORD CORD CORD CORD CORD
2 1 1 1 1 1 1 1 1 1 1 1 (CORD ARMOR D10.1) (CORD ARMOR D8.8) FOR USA,CAN (CORD ARMOR D8.8) FOR INA,KOR (CORD ARMOR D8.8) FOR SIN,KUW (CORD ARMOR D10.1) FOR AUS,NZL (CORD ARMOR D8.8) FOR GBR (230V) (CORD ARMOR D10.1) SYR (CORD ARMOR D10.1) FOR ITA,FRG,FRA, HOL,DEN,FIN,SWE,AUT,NOR,ESP
* * * *
72 72 72A 72A 73
500-406Z 500-391Z 500-435Z 500-456Z 315-147
CORD CORD CORD CORD DUST PACKING
1 1 1 1 2
(CORD ARMOR D8.8) FOR GBR (110V),SAF (CORD ARMOR D10.1) FOR SUI (CORD ARMOR D8.8) FOR HKG (CORD ARMOR D8.8) FOR CHN (TILL 7.1998)
9 --- 00
* : ALTERNATIVE PARTS --- 3 ---
STANDARD ACCESSORIES
ITEM No. 501 502 * * * 503 503 504 CODE NO. 307-786 303-659 303-709 310-331 303-624 CASE SIDE HANDLE DEPTH GAUGE DEPTH GAUGE CHUCK ADAPTER (D) (SDS PLUS) DESCRIPTION NO. USED 1 1 1 1 1 FOR USA FOR AUS REMARKS
DH 24PB
OPTIONAL ACCESSORIES
ITEM No. 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 CODE NO. 306-369 306-368 306-370 944-460 944-461 993-038 944-462 944-500 944-463 944-464 303-617 303-618 303-619 303-620 944-477 303-332 303-334 303-335 302-976 302-975 303-621 302-974 302-979 302-978 303-622 302-977 971-794 971-795 971-796 971-797 971-798 971-799 971-800 971-801 971-802 971-803 982-684 982-685 982-672 982-673 982-674 DESCRIPTION DRILL BIT (SLENDER SHAFT) D3.4X90 DRILL BIT (SLENDER SHAFT) D3.5X90
ADAPTER FOR SLENDER SHAFT (SDS PLUS)
NO. USED 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 INCLUD.642
REMARKS
TAPER SHANK DRILL BIT D11X100 TAPER SHANK DRILL BIT D12.3X110 TAPER SHANK DRILL BIT D12.7X110 TAPER SHANK DRILL BIT D14.3X110 TAPER SHANK DRILL BIT D14.5X110 TAPER SHANK DRILL BIT D17.5X120 TAPER SHANK DRILL BIT D21.5X140 TAPER SHANK ADAPTER (SDS PLUS) NO.1 TAPER SHANK ADAPTER (SDS PLUS) NO.2 A-TAPER SHANK ADAPTER (SDS PLUS) B-TAPER SHANK ADAPTER (SDS PLUS) COTTER HAMMER DRILL CHUCK SET 13MM CHUCK HANDLE RUBBER CAP
ANCHOR SETTING ADAPTER A (SDS+)W1/4X260L
ANCHOR SETTING ADAPTER A(SDS+)W5/16X260L
INCLUD.617,618
ANCHOR SETTING ADAPTER A (SDS+)W3/8X160L ANCHOR SETTING ADAPTER A (SDS+)W3/8X260L ANCHOR SETTING ADAPTER B (SDS+)W1/4X260L ANCHOR SETTING ADAPTER B(SDS+)W5/16X260L ANCHOR SETTING ADAPTER B (SDS+)W3/8X160L ANCHOR SETTING ADAPTER B (SDS+)W3/8X260L ANCHOR SETTING ADAPTER A W1/4" (MANUAL) ANCHOR SETTING ADAPTER A W5/16" (MANUAL) ANCHOR SETTING ADAPTER A W3/8" (MANUAL) ANCHOR SETTING ADAPTER A W1/2" (MANUAL) ANCHOR SETTING ADAPTER A W5/8" (MANUAL) ANCHOR SETTING ADAPTER B W1/4" (MANUAL) ANCHOR SETTING ADAPTER B W5/16" (MANUAL) ANCHOR SETTING ADAPTER B W3/8" (MANUAL) ANCHOR SETTING ADAPTER B W1/2" (MANUAL) ANCHOR SETTING ADAPTER B W5/8" (MANUAL)
CENTER PIN (A) 109L FOR CORE BIT D32-38 CENTER PIN (B) 104L FOR CORE BIT D45-90 CORE BIT (A) 25MM CORE BIT (A) 29MM CORE BIT (A) 32MM
*
: ALTERNATIVE PARTS
9 --- 00
--- 4 ---
OPTIONAL ACCESSORIES
ITEM No. 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 CODE NO. 982-686 982-675 982-687 982-676 982-688 982-677 982-689 982-678 982-690 303-625 303-626 303-627 303-046 303-044 303-045 303-820 950-275 930-515 981-122 303-623 950-272 303-624 971-511Z 971-512Z 306-885 306-910 971-787 931-844 981-840 308-471 980-927 315-921 315-633 DESCRIPTION GUIDE PLATE (FOR CORE BIT 32MM) CORE BIT (A) 35MM GUIDE PLATE (FOR CORE BIT 35MM) CORE BIT (A) 38MM GUIDE PLATE (FOR CORE BIT 38MM) CORE BIT (B) 45MM GUIDE PLATE (FOR CORE BIT 45MM) CORE BIT (B) 50MM GUIDE PLATE (FOR CORE BIT 50MM) CORE BIT SHANK (SDS PLUS) 25-38MM 105L CORE BIT SHANK (SDS PLUS) 25-38MM 300L CORE BIT SHANK (SDS PLUS) 45-90MM 300L
BULL POINT (SDS+) 250MM(ROUND SHANK TYPE)
CHEMICAL ANCHOR ADAPTER (SDS+)12.7MMX90L CHEMICAL ANCHOR ADAPTER(SDS+)19.0MMX100L
DH 24PB NO. USED 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 INCLUD.667 INCLUD.659 INCLUD.658,661 INCLUD.659,660 INCLUD.650 INCLUD.648 INCLUD.646 INCLUD.644 REMARKS
DRILL CHUCK AND ADAPTER SET (SDS PLUS)
DRILL CHUCK 13VLR CHUCK WRENCH 10G SPECIAL SCREW M6X22 CHUCK ADAPTER (G) (SDS PLUS) DRILL CHUCK 13VLA CHUCK ADAPTER (D) (SDS PLUS) + DRIVER BIT (A) NO.2 25L + DRIVER BIT (A) NO.3 25L DUST COLLECTOR (B) ASS'Y SOCKET ADAPTER (B) DUST CUP STOPPER
GREASE (A) FOR HAMMER.HAMMER DRILL (30G)
GREASE FOR HAMMER.HAMMER DRILL (70G) GREASE FOR HAMMER.HAMMER DRILL (500G)
ADAPTER (A) FOR HAMMER DRILL DUST COLLECTION ADAPTER (A)
9 --- 00
* : ALTERNATIVE PARTS --- 5 ---
DH 24PB ITEM No. CODE NO. DESCRIPTION NO. USED REMARKS
--- 6 ---
Printed in Japan (000929 N)
9 --- 00
...
