User manual HITACHI 19LD4550C

Colour LCD Television Model Name 19LD4550C 19LD4550U 22LD4550C 22LD4550U 26LD4550C 26LD4550U 32LD4550C 32LD4550U USER'S MANUAL MANUEL UTILISATEUR BEDIENUNGSANLEITUNG MANUAL DEL USUARIO MANUALE D'USO BRUKSANVISNING BRUKERHÅNDBOK BRUGERVEJLEDNING KÄYTTÖOPAS GEBRUIKSAANWIJZING READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER'S MANUAL FOR FUTURE REFERENCE For future reference, record the serial number of your television. SERIAL NO. This serial number is located on the rear of the television. Ver. 1 USER'S MANUAL Thank you for purchasing the Hitachi LCD Television.Please read this user's manual carefully before operating this product. To ensure proper operation, please read and follow ALL the instructions, especially the "IMPORTANT SAFETY INSTRUCTIONS" and "SAFETY PRECAUTIONS". Please keep this user's manual for future reference. Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................... 1 INTRODUCTION .................................................................................................... 2 About This Manual ...........................................................................................................2 Trademark Credits ...........................................................................................................2 About Software ................................................................................................................2 ENGLISH SAFETY PRECAUTIONS ...................................................................................... 3 SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT .................................3 Important for United Kingdom..........................................................................................4 About the Symbols...........................................................................................................4 OVERVIEW ............................................................................................................ 8 SUPPLIED ACCESSORIES .................................................................................. 8 PREPARATION...................................................................................................... 9 Front Panel Controls........................................................................................................9 Back Panel Information..................................................................................................10 Stand Installation ........................................................................................................... 11 Detaching Stand (Only 26/32) .......................................................................................12 Wall Mounting ................................................................................................................13 EXTERNAL EQUIPMENT SETUP....................................................................... 14 HD Receiver Setup ........................................................................................................14 Digital Audio Out Setup..................................................................................................16 DVD Setup.....................................................................................................................17 VCR or DVD Setup ........................................................................................................20 Connecting with a Euro Scart cable...............................................................................21 Connecting with a S-Video cable...................................................................................21 Other A/V Source Setup ...............................................................................................22 Insertion Of CI Module ..................................................................................................22 PC Setup .......................................................................................................................23 Connecting with a HDMI to DVI cable ...........................................................................24 WATCHING TV / PROGRAMME CONTROL....................................................... 29 ENGLISH Remote Control Key Functions .....................................................................................29 Turning On The TV ........................................................................................................31 Programme Selection ....................................................................................................31 Volume Adjustment ........................................................................................................31 Quick Setup ...................................................................................................................32 Menus Selection And Adjustment ..................................................................................33 Auto Programme Tuning................................................................................................34 Audio Language Selection (In Digital Mode Only) .........................................................35 Manual Programme Tuning (In Digital Mode) ................................................................36 Manual Programme Tuning (In Analog Mode) ...............................................................37 Programme Skip ............................................................................................................38 Assigning Programme Fine Tune(In Analog Mode) .......................................................39 Selecting The Channel List ............................................................................................40 Input List ........................................................................................................................41 PICTURE CONTROL ........................................................................................... 42 Picture Size (Aspect Ratio) Control ...............................................................................42 Preset Picture Settings ..................................................................................................44 Picture Mode-Preset ................................................................................................44 Colour Temperature (Normal/Warm/Cool)................................................................45 Manual Picture Adjustment ............................................................................................46 Picture Mode-User option ........................................................................................46 Picture Improvement Technology...................................................................................47 Picture Mode..................................................................................................................48 SOUND CONTROL.............................................................................................. 49 Sound Setting Adjustment -User Mode..........................................................................49 Preset Sound Settings-Sound Mode .............................................................................50 Balance..........................................................................................................................51 Auto Volume Level.........................................................................................................52 Selecting Digital Audio Out ............................................................................................53 TV Speakers On/ Off Setup ...........................................................................................54 Audio Description on/off Setup ......................................................................................55 OPTION CONTROL ............................................................................................. 56 ENGLISH Menu Language Selection .............................................................................................56 Time Zone Setup ...........................................................................................................57 Clock Setup ...................................................................................................................58 Auto On/Off Timer Setting..............................................................................................59 Sleep Timer Setting .......................................................................................................60 Diagnostics ....................................................................................................................61 Common Interface(CI) ...................................................................................................62 PARENTAL CONTROL / RATINGS..................................................................... 63 Set Password & Lock System........................................................................................63 Block Programme ..........................................................................................................64 Parental Control (Program Block)..................................................................................65 Key Lock ........................................................................................................................66 TELETEXT ........................................................................................................... 67 Switch On/Off.................................................................................................................67 Simple Text ....................................................................................................................67 Top Text..........................................................................................................................67 Special Teletext Functions .............................................................................................68 APPENDIX ........................................................................................................... 69 Initializing (Reset to original factory settings) ................................................................69 Troubleshooting .............................................................................................................70 WARRANTY......................................................................................................... 72 IMPORTANT SAFETY INSTRUCTIONS ENGLISH the unit that may shorten its service time. (70 ~ 71) to determine the symptoms when problems occur during installation or operation of the product. Power, unplug the Power Cord, and then, contact your local dealer immediately. vases, shall be placed on the apparatus. connection. remain readily operable. therefore the sound pressure level. components to secure the VESA-compatible wall bracket to your TV. The supplied components are designed to match the weight of your TV. 1 INTRODUCTION Thank you for purchasing the Colour LCD Television. We hope that you will enjoy the great performance of this product. This Colour LCD Television has been designed to meet the international standards. However, it could cause personal injuries and property damage if improperly handled. In order to prevent potential installing, operating, and cleaning the product.Keep this manual for future reference, and record the serial number of your set in the space provided on the front cover page of this manual. ENGLISH About This Manual regarding this manual, please contact your local dealer or our Customer Service Centre. constraints of the hardware and software. We are not responsible and have no liability for any loss, damage or injury as a result of misuse. are prohibited without any prior written permission. All other products and company names used in this manual are trademarks or registered trademarks of their respective owners. Trademark Credits trademarks of HDMI Licensing LLC. with European Digital Broadcasting. license. FREEVIEW Logo © DTV Services Ltd 2002. This logo indicates that the product is set up to view digital terrestrial TV. The "HD ready" logo is a trademark of EICTA. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. About Software You may not alter, decompile, disassemble, decrypt, or otherwise reverse- engineer the Software installed in this product, which are prohibited by law. Information for Users Applicable in European Union Countries (WEEE). discarded batteries as unsorted municipal waste, but use the return and collection systems available. or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury, or more than 0.002% Cadmium or more than, 0.004% Lead. 2 SAFETY PRECAUTIONS SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ************** DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and withdraw the mains plug before making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat. ************** DON'T DON'T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. DON'T liquids, such as vases, to be placed on the equipment. DON'T DON'T instructions. DON'T use equipment such as personal stereos or radios so that you are distracted from the DON'T listen to headphones at high volume, as such use can permanently damage your hearing. DON'T is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that your family know how to do this. Special arrangements may need to DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer. ABOVE ALL --- NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electrical shock; --- NEVER guess or take chances with electrical equipment of any kind --- it is better to be safe than sorry! ************** 3 ENGLISH SAFETY PRECAUTIONS For your safety, please read the following precautions carefully before using this product. Improper use would cause serious personal injuries and/or damage to your property or this product. ENGLISH Important for United Kingdom IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the covers are available from your dealer. short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply. WARNING: THIS EQUIPMENT MUST BE EARTHED IMPORTANT The wires in the mains lead are coloured in accordance with the following code : Earth As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: YELLOW. The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. Brown to Live Fuse Cord Clamp Blue to Neutral About the Symbols The following are the symbols used in this manual and affixed on the unit itself. Please fully understand the meanings of the symbols before reading the instructions in this section. Information for Users Applicable in European Union Countries life separately from your household wastes. There are separate collection systems for recycling in EU. For more information, please contact the local authority or the dealer where you purchased the product. WARNING WARNING Never ignore the instruction. There are risks of serious injuries or possible death to the user. Do not ignore the instruction. There are possibilities of personal injuries and/or property damage. Other Symbols The triangle with illustration is intended to alert the users that there are possibilities of fire, explosion, or high temperature if the product is handled improperly. Each illustration within the triangle specifies the contents in detail. (The figure on the left is an example.) The circle with diagonal line and illustration indicates a prohibited action (the symbol to the left indicates that disassembly is prohibited.) This symbol indicates a compulsory action. The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that the power plug should be disconnected from the power outlet). WARNING There is a risk of fire, electric shock, or serious injury. Unplug the power cord immediately when serious problems occur. Serious problems such as Do not continue using the product under these abnormal conditions. Turn off the Main Power, unplug the Power Cord, and contact your dealer immediately. For your safety, never try to repair the product by yourself. Disconnect the plug from the power outlet. 4 SAFETY PRECAUTIONS (continued) CAUTION There is a risk of fire, electric shock, or serious injury. Do not insert liquids or any foreign objects (such as metals or flammable items) inside the unit. ENGLISH Do not remove cover, or modify the product. electrical shock, and other dangerous conditions. Do not disassemble Install the unit in a sensible place where it does not expose anyone to danger or injury. Do not place any objects on top of the unit. Objects such as Do not install the unit in an unsuitable place. likely such as bathrooms or shower rooms, close to windows, or outside where rain, snow or other inclement conditions could occur should be avoided. Please also avoid installing the unit in a position where fumes from a Hot Spring could come into contact with it. Unplug this unit during lightning storm. Disconnect the plug from the power outlet. Do not do anything that may damage the Power Cord. Use only with designated power supply voltage. on the unit. Beware not to drop or have any impact on the unit. contact your local dealer immediately. Clean dust or metals on or around the blade of the power plug regulary. Do not place the unit on an unstable surface. Unstable places such as 5 SAFETY PRECAUTIONS (continued) CAUTION Do not place your fingers into the gap at the opened front door of the unit. ENGLISH Do not place the unit at a dusty place. It could cause malfunction. Do not cover or block any ventilation holes on the product. The unit would overheat, and it could cause fire or damage the product which may shorten its service life. Be sure to ground the earth cable correctly. connection would cause fire or electrical shock. Supply connect the ground wire. Connection to a Cable Distribution System is to be provided through a galvanic isolator. Follow the Anti-tumble measures in this manual. seriously. Do not install this product near the medical devices. Do not place a CRT-based television near the speakers of the Colour LCD Television. from the speakers of the unit. Disconnect all of the external connection cables and detach the anti-tumble measures before moving the unit. Connect the power plug securely. Do not handle the Power Cord with wet hands. Do not pull the cord when you unplug the Power Cord. Unplug the Power Cord when you do not intend to use the product for long periods of time. Handle the batteries properly. injury or damage to property. 6 SAFETY PRECAUTIONS (continued) CAUTION Adjust the headphone volume properly. ENGLISH PRECAUTIONS Do not install areas where it will be subjected to high temperatures. It could damage the cabinet or parts of the product. Viewing Advice protect your eyes against eyestrain. When transporting this product: product. Keep radio away from this unit whilst in use. This unit is designed to meet the European EMC standards due to prevent radio interference. However, the unit may generate noise in the radio. Adjust the direction of the radio antenna in order not to receive the interference from the unit. About infrared communication devices: because of communication failure. Please note that this is not malfunction. When you dispose of this product at the end of its life, follow the regulations in your residential area. SAFETY PRECAUTIONS (continued) Please make sure to unplug the power cord before cleaning the unit. How to clean the Colour LCD Television screen panel of the unit. damage to the coating. 7 OVERVIEW Large-screen and high-definition LCD panel. Improved Digital signal processor. 3 Scart terminals installed. Accept more digital input devices with 2 HDMI terminals located on front and rear. Photo Input function with Slide Show. SD Card Slot installed. Optical Audio Out installed. Easy-to-use On-Screen Display system operating with Remote control. Low power consumption with Power Saving feature. Motorized Power Swivel feature. Provided 2000 pages for Teletext. ENGLISH SUPPLIED ACCESSORIES Check the supplied accessories before installation. In case of missing or damaged, please contact the dealer immediately. User's Manual Remote Control POWER INPUT i AAA size battery X2 Quick Guide SLEEP 1 4 7 GUIDE 2 5 8 0 3 6 9 CH LIST AD FAV ADD/ERASE MUTE P RETURN MENU EXIT OK SUBPAGE ? S i Stand Power Cord x3 Screws 4x20 (26 Only) x4 Screws 4x20 (32 Only) UK only PAN-EU * The type of power plug provided is different depending on the model 8 PREPARATION Front Panel Controls Image shown may differ from your TV. TV with a soft cloth. ENGLISH + - 1 + P 2 3 OK 4 5 6 Volume Use these two buttons to adjust volume up/down. In OSD menu, use these two buttons to switch the selection left and right. Program Use these two buttons to select channels In OSD menu, use these two buttons to switch the selection up and down. OK This button accepts your selection or display the current mode. MENU Press this button to display the on-screen display (OSD) menu. POWER Press this button to switch the TV on/off. POWER LED/IR Remote Receiver The blue light indicates the TV power is on. The red light indicates the TV is in standby mode. Receive the signal from the remote control. 9 Back Panel Information COMMON INTERFACE 2 3 1 VIDEO S-VIDEO AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT AV 1 AV 2 RGB IN (PC) Pb AV IN 3 R AUDIO L HDMI IN 2 ENGLISH 10 4 11 1 2 Pr H/P HDMI IN 1 (DVI) RS-232C IN (SERVICE ONLY) COMPONENT IN 5 5 6 7 8 9 Power Cord Socket This TV operates on an AC power. The page. Never attempt to operate the TV on DC power. RGB/DVI Audio Input Connect the audio from a PC or DVI. DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of ports do not work. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. HDMI Input Connect a HDMI signal to HDMI IN or DVI (VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. RGB Input Connect the output from a PC. 10 RS-232C IN (SERVICE ONLY) PORT Component Input Connect a component video/audio device to these jacks. Aerial Input Connect RF aerial to this jack. Common Interface (CI) Card Slot This is normally used to receive Pay services and is not available in all Countries. Audio/Video Input Connect audio/video output from an external device to these jacks. S-Video Input Connect S-Video out from an S-Video device. Headphone Socket Connect the headphone plug to this socket. Stand Installation When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. ENGLISH (Only 26/32) Carefully place the TV screen side down on a cushioned surface to protect the screen from scratches and damages. Assemble the Base with the Stand as shown. Fix the bolts securely at the bottom of the Base. (3 bolts for 26" TV and 4 bolts for 32" TV). (Only 19/22) Carefully place the TV screen side down on a cushioned surface to protect the screen from scratches and damages. Assemble the Base with the Stand as shown. 11 Detaching Stand (Only 26/32) Image shown may differ from your TV. ENGLISH (Only 26/32) Carefully place the TV screen side down on a cushioned surface to protect the screen from scratches and damages. Loosen the bolts from the bottom of the Base. (3 bolts for 26" TV and 4 bolts for 32" TV). Separate the Base from the Stand as shown. (Only 19/22) Carefully place the TV screen side down on a cushioned surface to protect the screen from scratches and damages. Pull out the Base while pressing the button on the Stand as shown. 12 Wall Mounting Before assembling the wall mounting, make sure the bolts are fully tightened on the wall mount bracket. If not, the TV may tilt after the installation ENGLISH (Only 26/32) Remove the bolts from the back of the Stand. (3 bolts for 26" TV and 4 bolts for 32" TV). Remove the Stand Base as shown. Secure the wall mount bracket to the back of the TV. (Refer to the instructions for the wall mount bracket.) (Only 19/22) Remove the 3 bolts from the back of the Base. Remove the Stand Base as shown. Secure the wall mount bracket to the back of the TV. (Refer to the instructions for the wall mount bracket.) NOTE For 19"/22"/26": Secure the wall mount bracket to the back of the TV using four M4 screws(M4 x 10mm). For 32": Secure the wall mount bracket to the back of the TV using four M6 screws(M6 x 10mm). 13 EXTERNAL EQUIPMENT SETUP HD Receiver Setup Pb Pr ENGLISH Connecting with a component cable COMPONENT IN Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO jacks on the TV. Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV. Turn on the digital set-top box. (Refer to the user manual for the digital set-top box.) Select Component input source using the INPUT button on the remote control. Signal 480i 576i 480p/576p 720p/1080i 1080p Component Yes Yes Yes Yes No HDMI Yes Yes Yes Yes Yes 14 Connecting a set-top box with an HDMI ENGLISH Connect the HDMI output of the digital set-top box to the HDMI IN1(DVI) or HDMI IN 2 jack on the TV. Turn on the digital set-top box. (Refer to the user manual for the digital set-top box.) Select HDMI1 or HDMI2 input source using the INPUT button on the remote control. HDMI IN 1 (DVI) Connecting with a HDMI to DVI cable AUDIO IN (RGB/DVI) Connect the digital set-top box to HDMI IN 1(DVI) jack on the TV. Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) Select HDMI1 input source using the INPUT button on the remote control. HDMI IN 1 (DVI) 15 Digital Audio Out Setup Audio Output (Optical) port. ENGLISH Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input Set the " TV Speaker option - Off " in the AUDIO manual for operation. DMI IN 1 (DVI) AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT AV 1 1 RGB IN (PC) Pb Pr RS-232C IN (SERVICE ONLY) COMPONENT IN N CAUTION Do not look into the optical output port. Looking at the laser beam may damage your vision. 16 DVD Setup When connecting with a component cable Connect the video outputs (Y, Pb, Pr) of the DVD to the COMPONENT IN VIDEO jacks on the TV. Pb ENGLISH Connecting with a component cable. Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV. Turn on the DVD player, insert a DVD. Select Component input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. Pr COMPONENT IN Component Input ports component input ports as shown below. Component ports on the TV Y Y Video output ports on DVD player Y Y Y Pb Pb B-Y Cb Pb Pr Pr R-Y Cr Pr 17 Connecting with a Euro Scart cable Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the TV. Turn on the DVD player, insert a DVD. Select AV1 input source using the INPUT button on the remote control. If connected to AV2 Euro scart socket, select AV2 input source. Refer to the DVD player's manual for operating instructions. AV IN 3 Refer to the DVD player's manual for operating Instructions. 18 HDMI IN 2 Select AV3 (S-Video) input source using the INPUT button on the remote control. H/P R AUDIO L Turn on the DVD player, insert a DVD. VIDEO S-VIDEO Connect the audio outputs of the DVD to the AUDIO input jacks on the TV. COMMON INTERFACE ENGLISH AV 1 AV 2 NOTE Any Euro scart cable used must be signal shielded. Connecting with a S-Video cable Connect the S-VIDEO output of the DVD to the S-VIDEO input on the TV. Connecting the HDMI cable Connect the HDMI output of the DVD to the HDMI IN 1(DVI) or HDMI IN 2 jack on the TV. Select HDMI1 or HDMI2 input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. ENGLISH HDMI IN 1 (DVI) NOTE The TV can receive video and audio signals simultaneously when using a HDMI cable. If the DVD does not support Auto HDMI, you must set the output resolution appropriately. 19 VCR or DVD Setup VCR and TV. sides of the screen may remain visible. ENGLISH Connecting with a RF cable Wall Jack Antenna Connect the ANT OUT socket of the VCR to the ANT IN socket on the TV. Connect the aerial cable to the ANT IN socket of the VCR. Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing. 20 Connecting with a Euro Scart cable Connect the Euro scart socket of the VCR to the AV1 Euro scart socket on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) Select AV1 input source using the INPUT button on the remote control. If connected to AV2 Euro scart socket, select AV2 input source. AV 1 AV 2 ENGLISH NOTE Any Euro scart cable used must be signal shielded. Connecting with a S-Video cable Connect the S-VIDEO output of the VCR to the S-VIDEO input on the TV. The picture composite (RCA cable) input. Connect the audio outputs of the VCR to the AUDIO input jacks on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) Select AV3 (S-Video) input source using the INPUT button on the remote control. HDMI IN 2 COMMON INTERFACE AV IN 3 H/P 21 R AUDIO L VIDEO S-VIDEO Other A/V Source Setup Connect the AUDIO/VIDEO jacks COMMON INTERFACE Select AV3 (CVBS) input source using the INPUT button on the remote control. Operate the corresponding external AV IN 3 operating guide. HDMI IN 2 H/P Insertion Of CI Module - To view the encrypted (pay) services in digital TV mode. - This feature is not available in all countries. Insert the CI Card to the CI (Common Interface) CARD SLOT of the TV as shown. For further information, see p.60. COMMON INTERFACE R AUDIO L VIDEO S-VIDEO ENGLISH Camcorder Video Game Set red) 1 22 PC Setup This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. ENGLISH Connecting with a D-sub 15 pin cable AUDIO IN (RGB/DVI) the RGB IN (PC) jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV Select RGB input source using the INPUT button on the remote control. RGB IN (PC) 23 Connecting with a HDMI to DVI cable Connect the DVI output of the PC to the HDMI IN 1(DVI) jack on the TV. HDMI IN 1 (DVI) AUDIO IN (RGB/DVI) ENGLISH Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV. Select HDMI1 input source using the INPUT button on the remote control. NOTE To enjoy vivid picture and sound, connect a PC to the TV. screen for prolonged periods of time. The Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). If using a sound card, adjust PC sound as This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV. when possible. the resolution. There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. The synchronization input waveform for separate. Connect the signal cable from the monitor of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV. Play functionality. If the graphic card on the PC does not output (or HDMI/DVI IN) to display the PC output on the TV. If the graphic card on the PC does output (the other mode is set to Plug and Play automatically by the TV.) DOS mode may not work depending on the video card if you use a HDMI to DVI cable. cable under 5m is recommended. 24 Supported Display Resolution ENGLISH Resolution 720x400 640x480 Horizontal 31.468 31.469 37.684 37.879 Vertical 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 60.00 75.00 75.00 59.60 57.887 59.94 59.988 Resolution 720x480 720x480 720x576 720x576 1280x720 Horizontal 31.469 / 31.5 15.734 / 15.6 31.25 15.625 37.500 44.96 / 45 33.72 / 33.75 28.125 26.97 / 27 Vertical 59.94 / 60 60 50 50 50 59.94 / 60 59.94 / 60 50.00 23.97 / 24 26.976 / 30.00 50 59.94 / 60 800x600 46.875 832x624 49.725 48.363 1024x768 56.470 60.123 1280x720 1280x800 1152x864 1366x768 1440x900 1680x1050 1920x1080 45.00 62.795 67.50 47.56 55.935 65.16 66.647 1920x1080 33.716 / 33.75 56.250 67.43 / 67.5 NOTE . 25 ENGLISH Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. This function is for automatic adjustment of the screen position, size, and phase. The displayed image will be unstable for a few seconds while the auto OPTION OK Screen OK Move RETURN OK OK Move RETURN Menu Language Input List Screen Factory Reset Auto Config H.Position V.Position Phase Size Resolution 61 49 16 127 1 MENU 2 3 4 Select OPTION is still not correct, try Auto OK or Select Screen. Select adjusted again after Auto can adjust the Position, Size or Phase manually. OK or OK or Make Appropriate Adjustments MENU or EXIT button to return to normal TV viewing. RETURN button to move to the previous menu screen. 26 Adjustment for screen Position, Size, Phase trembling, adjust the picture phase manually. ENGLISH OPTION OK OK Move RETURN Screen OK OK Move RETURN Menu Language Input List Screen Factory Reset Auto Config H.Position V.Position Phase Size Resolution 61 49 16 127 1 MENU 2 3 4 Select OPTION. OK or Select Screen. Select H. Position, V. Position, Phase, Size or Resolution Make Appropriate Adjustments. OK or OK or MENU or EXIT button to return to normal TV viewing. RETURN button to move to the previous menu screen. 27 Selecting Resolution ENGLISH PC mode. PC mode. Screen OK Resolution OK Move RETURN 1 61 49 16 127 2 3 1024 X 768 1280 X 768 1360 X 768 OK OK Move RETURN Auto Config H.Position V.Position Phase Size Resolution 1 MENU 2 3 4 Select OPTION. OK or Select Screen. Select Resolution OK or