User manual HITACHI 32LD6600A

Instructions for use GB D F I 32L D 6600 32L D 6600A 32L D 6600B Bedienungsanleitung Notice d'utilisation Istruzioni per l'uso Contents Remote Control Buttons ......................... 2 LCD TV ..................................................... 3 Preparation ............................................. 5 Features ............................................... 5 Panel Features .................................... 5 Safety Precautions ................................. 5 Before Switching On Your TV ................ 8 Power Connection ............................... 8 Connections To The Aerial Input Socket8 How To Connect Other Devices ........... 8 Inserting Batteries In The Remote Control Handset ................................... 8 Switching The TV ON/OFF ...................... 8 To switch the TV on: ............................. 8 To switch the TV off: .............................. 8 Initial Settings ......................................... 9 Initial APS (Automatic Programming System) ................................................ 9 Operating The TV .................................... 9 Operating with the buttons on the TV set9 Operating With Remote Control .......... 9 Menu System ........................................ 10 Picture menu ...................................... 10 Sound menu ...................................... 11 Feature menu ..................................... 12 Install menu ....................................... 13 Program menu ................................... 14 Source menu ..................................... 15 PC Mode ................................................ 15 Installation .......................................... 15 Menu System in PC mode ................. 15 PC Picture Position Menu .................. 15 PC Picture Menu ................................ 16 Sound Menu ....................................... 16 Feature Menu ..................................... 16 Source Menu ...................................... 16 Sound in PC mode ............................ 16 Other Features ...................................... 16 TV Status ............................................ 16 Mute Indicator ..................................... 16 PIP and PAP modes ........................... 16 Freeze Picture .................................... 17 Zoom Modes ...................................... 17 -1Teletext .................................................. 18 To Operate Teletext ............................ 18 To Select A Page Of Teletext ............... 18 To Select Index Page ......................... 18 To Select Teletext With A TV Programme ........................................ 18 To Select Double Height Text ............. 18 To Reveal Concealed Information ... 18 To Stop Automatic Page Change ....... 18 To Select A Subcode Page ................. 19 PAT (Picture and Text) ......................... 19 To Exit Teletext .................................... 19 To Display The Time .......................... 19 Fastext ................................................ 19 Connect Peripheral Equipment ........... 20 High Definition ................................... 20 Via The Scart ...................................... 20 Via Aerial Input .................................... 20 Decoder .............................................. 20 TV And Video Recorder ...................... 20 Playback NTSC .................................. 20 Copy Facility ....................................... 20 Search For And Store The Test Signal Of The Video Recorder ........................... 20 Camera And Camcorder .................... 21 Connect The Decoder To The Video Recorder ............................................ 21 Connecting Headphones .................. 21 Connecting External Speakers .......... 21 Aerial Connection ................................. 22 Tips ........................................................ 23 Care Of The Screen ........................... 23 Poor Picture ........................................ 23 No Picture ........................................... 23 Sound ................................................. 23 Remote Control .................................. 23 No solution: ........................................ 23 Specifications ....................................... 24 Appendix A: PC Input Typical Display Modes .................................................... 25 Appendix B: DVD Player Selection ...... 26 Appendix C: Main and PIP-PAP Picture Combinations ........................................ 27 UK Guarantee ........................................ 28 Remote Control Buttons = Stand by On/Off = Picture Mode = Equalizer Sound Mode = Surround Mode = Input Source = Program Information = Sound Mode = Sleep Timer RED / GREEN / YELLOW / = PAT (Picture and Text) = Subtitle page in TV mode = Select active window in PIP mode BLUE = Only used in Teletext mode = Menu On/Off = Go back to previous menu a P+ = Programme Up / Cursor Up _ ` = Volume Down / Cursor Left = Volume Up / Cursor Right OK = Enter b P- = Programme Down / Cursor Down = Mute On/Off = Freeze On/Off = Aspect ratio 0 - 9 = Digit buttons = Teletext On/Off = PIP / PAP / TV = PIP position = Sub page / = Time / Update = Hold = Index Page = Expand = Reveal = Mix *** These buttons can control most Hitachi DVD Players and Recorders. Please see P26 for details of how to operate with other brands. -2- LCD TV FRONT VIEW 63($.(5 /(' 63($.(5 REAR VIEW 79$9 0(18 3&+ 92/80 ( QrÃ8qà D QrÃPPssà i !!W!#W 68$ÃC 32:(5 -3- Headphone Audio Inputs Video Input S-VHS Input TV/AV button MENU button Prog. Up, Prog. Down buttons Volume Up, Volume Down buttons Power cord input Power On/Off switch PC Audio Input Aerial Scart 2 (EXT-2) Scart 1 (EXT-1) HDMI Input (EXT-5) Component Audio Inputs Component Video (YPbPr) Inputs VGA Input EXT-3 / 5 EXT-4 EXT-4S Standyby button / 5 69+6 69+ 6 79$9 0(18 3&+ 92/80( 7 $ 99 01 (8 3+ & 9/0 28 ( !!W!#W 6 8$ÃC 32:(5 -4- Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and/or moderate climates. When no valid signal is detected, after 5 minutes the TV switches itself automatically to stand-by mode. PLL (Frequency Search) PC Input (Support up to WXGA 1366 x 768) Stereo PC Audio Input Plug&Play for Windows 9X, ME, 2000, XP 3D Comb Filter Audio Line Out (with a special socket supplied) Features Remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system. It has 2 Scart sockets for external devices (such as video, video games, audio set, etc.) 3DS Virtual Surround Sound Stereo sound system (German+Nicam). Full function Teletext . Fastext (1000 Pages), TOP text. Headphone connection. Direct channel access. A.P.S. (Automatic Programming System). All programmes can be named. Forward or backward automatic tuning. Sleep timer. Child Lock. Automatic sound mute when no transmission. NTSC Playback. AV in and S-VHS in are available. It has VGA connector for external devices such as computer. It has an HDMI connector for Digital Video and Audio. This connection is also designed to accept High Definition signals. It has PIP / PAP / PAT functions. AVL (Automatic Volume Limiting) TV Picture in PC Panel Features 32-inch TFT LCD display. High resolution (1366x768) Contrast ratio (800:1 typical) Brightness (typical) 450 cd/m2. Display colour 16.7 Million. Safety Precautions IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV Dos and Donts DOs This Television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. This TV is supplied with a fitted mains plug. This plug must not be cut off as it may contain a special radio interference filter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appro- -5- priate safety approved extension lead or consult your dealer. Observe the manufacturers instructions when connecting extension leads to the TV. Check the fuse rating on the new plug, this should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these are easily identifiable by either the or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician. ABOVE ALL NEVER let anyone, especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electric shock. NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry! 1. Power Source The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting for your convenience. DONTs DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets. DONT remove any fixed cover as this may expose dangerous voltages. DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DONT use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DONT obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DONT use makeshift stands and NEVER fix legs or stands to the TV with any screws other than those provided - to ensure complete safety always use the manufacturers approved stand with the fixings provided. DONT allow electrical equipment to be exposed to rain or moisture. 2. Power Cord The power supply cord should be placed so that it is not likely to be walked on or pinched by items placed upon them or against it. Pay particular attention to cord where it enters the plug, power outlet, and the point where it exits from the receiver. 3. Moisture and Water Do not use this equipment in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this equipment to rain or water, as this may be dangerous and do not place objects filled with liquids on top. Avoid from dripping or splashing. 4. Cleaning Before cleaning, unplug the receiver from the main supply, outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth. 5. Ventilation The slots and openings on the receiver are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway. 6. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet. -6- 7. Replacement Part When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorised substitutions may result in fire, electrical shock, or other hazards. 8. Servicing Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock. 9. Naked Flame Sources Do not place naked flame sources on the apparatus. WARNING: When the device is not in use for a long time, disconnect from power. Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children. Battery, including those which is heavy metal-free, should not be disposed of with household waste. Please dispose of used battery in an environmentally sound manner. Find out about the legal regulations which apply in your area. Cold cathode fluoresant lamp in LCD PANEL contains a small amount of mercury, please follow local ordinates or regulations for disposal. "The LCD panel is very high technology product with about a million thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product." DO NOT LEAVE YOUR TV AT STAND-BY OR OPERATING WHEN YOU LEAVE YOUR HOUSE -7- Before Switching On Your TV Power Connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Connections To The Aerial Input Socket NOTE: Remove the batteries from remote control handset when it is not to be used for a long period.Otherwise it can be damaged due to any leakage of batteries. Switching The TV ON/OFF To switch the TV on: : 867G@ÃUWà Your TV will switch on in two steps: 1- Connect the power supply cord to the system. Press Power On/Off switch located by the mains input socket. Then the TV switches itself to stand-by mode and the led on the front of the TV becomes Red. 2- To switch on the TV from stand-by mode either: Press a digit button on the remote control so that a programme number is selected, or, Press the "+P/CH" or "P/CH-" button at the top of the TV or press the P- or P+ button on the remote control, so that last mode switched off is selected. By either method the TV will switch on and the led becomes green. 9+)8+) S@6SÃPAÃUC@ÃUW Connect the aerial or cable TV plug to the Aerial input socket located at the rear of the TV and connect the cable plug coming out from the TV out socket located on the devices (VCR, DVB etc.) to this socket as well. How To Connect Other Devices IMPORTANT: Switch off the TV before connecting any external device. Sockets for external connections are at the rear and right side of the TV. For connection of other devices via Scart refer to the manuals of the related devices. Inserting Batteries In The Remote Control Handset Remove the battery cover located on the back of the handset by gently pulling downwards from the indicated part. Insert two AA/R6 or equivalent type batteries inside. Place the batteries in the right directions. Replace the battery cover. -8- To switch the TV off: Press the (stand-by) button on the remote control or at the top of the TV, so the TV will switch to stand-by mode and the GREEN LED will become RED. To power down the TV completely, press Power On/Off button at the rear side of the TV, or, Unplug the power cord from the mains socket. Initial Settings Initial APS (Automatic Programming System) The following menu will be displayed on the screen when you turn your TV on for the first time. APS, searches and sorts all channels and stores them automatically on your TV, according to the transmission of programme systems in your area. 6VUPÃQSPBS6H @tyvuÃÃÃÃÃà GhthtrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 8ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà VFÃÃÃÃÃÃÃÃÃà Operating with the buttons on the TV set Volume setting and programme selection can be made by using the buttons on the control panel at the top of the TV. Volume Setting Press the VOLUME- button to decrease volume or the +VOLUME button to increase volume, so a volume level scale (slider) will be displayed at the bottom of the screen. Programme Selecting Press the +P/CH button to select the next programme or the P/CH- button to select the previous programme. Entering The Menu Press the MENU button on the control panel at the top of the TV to enter the menu. +P/CH / P/CH- and +VOLUME / VOLUME- buttons on the TV are used as navigation buttons in menu. AV Mode Press the TV/AV button on the control panel at the top of the TV to switch your TV to EXT modes. QG@6T@Ã8C@8FÃ6IU@II6Ã867G@ 6VUPÃQSPBS6HHDIBÃT`TU@H PFÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 8hpryÃÃÃÃà First of all choose Language and Country by / and _ / ` buttons. This will afusing fect the sort process in APS. To start APS, press the RED or OK button. ab VFÃÃÃÃD 6QTÃvÃvt $$!$ÃÃHu 8hpryÃÃÃÃÃÃÃÃà Operating With Remote Control The remote control handset of your TV is designed to control all the functions of your TV. The functions will be described in accordance with the menu system of your TV. Functions of the menu system are described in Menu System section. Volume Setting button to increase volume. Press the button to decrease volume. A Press the volume level scale (slider) will be displayed at the bottom of the screen. Programme Selecting (Previous or next programme) Press the P- button to select the previous programme. -9- After APS is finalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes. If you do not accept the locations and / or the programme names of programmes, you can change them from the Program Menu. (See page 14) Operating The TV You can operate your TV using both the remote control handset and the buttons on the set. Press the P+ button to select the next programme. Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9. The TV will switch to the selected programme after a short delay. For a two digit programme number enter the second digit after pressing the first digit within 2 seconds. Contrast By pressing / button, select Contrast. Press ` button to increase contrast. Press _ button to decrease contrast. Contrast level can be adjusted between 0 and 63. Brightness By pressing / button, select Brightness. Press ` button to increase brightness. Press _ button to decrease brightness. Brightness level can be adjusted between 0 and 63. Sharpness By pressing / button, select Sharpness. Press ` button to increase sharpness. Press _ button to decrease sharpness. Sharpness level can be adjusted between 0 and 31. Colour By pressing / button, select Colour. Press ` button to increase colour. Press _ button to decrease colour. Colour level can be adjusted between 0 and 99. Hue This item is displayed in picture menu when the TV receives an NTSC signal. By press/ button, select hue. Press ` button ing to increase hue. Press _ button to decrease hue. Hue level can be adjusted between -31 and 31. ab ab Menu System Your TV has been designed with a menu system to provide easy manipulation of a multifunction system. button to enter the menu. Press the Press _ / ` button to select a menu title and then / button to select a menu item and _ / ` or OK button to enter the menu item. ab ab Press the Press the menu. button to exit the menu. button to return to the previous ab Picture menu By pressing _ / ` button, select the first icon. Picture menu appears on the screen. QD8UVS@ HqrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ8vrh 8hÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ%! 7vturÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ!# TuhrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 8yÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ"! 8yÃUrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃXhÃÃÃÃÃÃÃà IvrÃSrqpvÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃHrqvÃÃÃÃÃÃà AvyÃHqrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Pss "9Ã8iÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Pss SrrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà ab Colour Temp By pressing / button, select Colour Temp. Press _ / ` button to choose one of these options: Cool, Normal and Warm. Noise Reduction This item is used to reduce the image noise and improve the picture quality at weak signals. By pressing / button, select Noise Reduction. Press _ / ` button to set Noise reduction level to Off, Low, Medium or High. ab Q6GÃÃÃ$C Mode By pressing / button, select Mode. Press _ / ` button to choose one of these options: Natural, Dynamic and Cinema. Picture mode can be changed directly by button. pressing the ab ab - 10 - Film Mode Films are recorded at a different number of frames per second to normal television programmes. / button, select Film Mode. By pressing Press _ / ` button to set this feature On or Off. Turn this feature on when you are watching films to see the fast motion scenes clearly. 3D Comb 3D Comb is used to improve colour transitions and colour quality of pictures. / button, select 3D Comb. By pressing Press _ / ` button to set this feature On or Off. Reset By pressing / button, select Reset. Press _ / ` or OK button to reset the picture modes to factory default settings. TPVI9 @hyvr TqÃHqrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà VrÃÃÃÃÃÃÃà !CÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà $CÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà $xCÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà $xCÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Ãà Ãà Ãà Ãà ab xCÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Ãà ab ab In equalizer menu the sound mode can be changed to User, Pop, Rock, Jazz, Flat and Classic by pressing _ / ` button. Equalizer menu settings can be changed only when Sound Mode is User. Select the desired fre/ button and increase or dequency by crease the frequency gain by pressing _ / ` button. ab Sound menu By pressing _ / ` button, select the second icon. Sound menu appears on the screen. TPVI9 WyrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà @hyvrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 7hyhprÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Ãà Press the menu. Balance button to return to the previous By pressing / button, select Balance. Press ` button to increase balance to the right. Press _ button to increase balance to the left. Balance level can be adjusted between -31 and 31. Headphone By pressing / button, select Headphone. Press _ / ` or OK button to enter headphone menu. TPVI9 ab CrhqurÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà TqÃHqrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà TrrÃÃÃÃÃÃÃà PÃÃÃÃÃÃÃÃÃÃà 6WGÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà PssÃÃÃÃÃÃÃÃÃÃà @ssrpÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà PssÃÃÃÃÃÃÃÃÃÃà 9hvpÃ7hÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà PÃÃÃÃÃÃÃÃÃÃà "9TÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà ab Volume Crhqur WyrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Press ` button to increase volume level. Press _ button to decrease volume level. Volume level can be adjusted between 0 and 63. Equalizer By pressing a / b button, select Volume. TqÃHqrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà TrrÃÃÃÃÃÃÃÃà 7hyhprÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Ãà By pressing / button, select Equalizer. Press _ / ` or OK button to enter equalizer menu. - 11 - ab Sound Mode / button, select Sound By pressing Mode. Press _ / ` button to change the mode. You can select Mono, Stereo, Dual A or Dual B mode, only if the selected channel supports that mode. In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option. AVL Automatic Volume Limiting (AVL) function adjusts the sound to obtain fixed output level between programs, having different sound levels. Pressing _ / ` button will turn this feature on or off. Effect You can use this feature to switch the sound effect on or off. If the current sound system is Mono and the sound effect is switched on, then the sound will be heard as if it is Stereo. If the current sound system is Stereo, switching this effect on will give a more spatial effect. Pressing _ / ` button will turn this feature on or off. Dynamic Bass Dynamic Bass is used to increase bass effect of the TV set. By pressing / button, select Dynamic Bass. By pressing _ / ` button set Dynamic bass to Low, High or OFF. It is not recommended to select High if listening at high volume levels. ab Feature menu By pressing _ / ` button, select the third icon. Feature menu appears on the screen. A@6UVS@ TyrrÃUvrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Pss 8uvyqÃGpxÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Pss GhthtrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà @tyvu @!ÃPÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà @YUÃà 9rshyÃaÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Qhhvp 7yrÃ7hpxtqÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà P HrÃ7hpxtqÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Uhypr HrÃUvrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà "Ãrp UryrrÃGhthtrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Xr Sleep Timer By pressing / button, select Sleep Timer. The timer can be programmed between Off and 2 hours in steps of 10 minutes by pressing _ / ` button. If sleep timer is activated, at the end of the selected time, the TV goes automatically to stand-by mode. Child Lock You can use this feature to prevent children turning the TV on or changing programs or adjustments etc. without remote control. The child lock feature can be set by _ / ` button to either on or off. When off is selected, there will be no difference in the operation of your TV. When on is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons, except the Standby button, at the top of the TV will not work. If one of these buttons is pressed, Child Lock On will be displayed on the screen. Language By pressing / button, select Language. By pressing _ / ` button, you can select the language. ab ab 3DS This feature is used to create the impression that sound is coming from around the room instead of from the set speakers. Pressing the _ / ` buttons will turn the feature on or off. ab - 12 - Ext-2 Out / button, select Ext-2 Out. By pressing You can set Ext-2 Out to TV, EXT-1, EXT-3, EXT-4, EXT-5 or PC by pressing _ / ` button. Note: Only audio output is available for EXT3, EXT-5 and PC. The other options have both audio and video outputs. Default Zoom By pressing / button, select Default Zoom. You can set Default Zoom to Panoramic, 4:3 or 14:9 Zoom by pressing _ / ` button. If there is no WSS or aspect ratio (picture size) information and zoom mode is button, selected as Auto by pressing the then the zoom mode will automatically change to Default Zoom setting. See also Zoom Modes on page 17. Blue Background You can set the TV to automatically change to a blue screen if the signal is weak or absent, or when there is no input from an external device. The Blue Background feature can be turned on or off by pressing _ / ` button. Menu Background By pressing / button, select Menu Background. You can change menu background to Translucent or Opaque by pressing _ / ` button. Menu Timeout By pressing / button, select Menu Timeout. Press _ / ` button to change menu timeout to 15 sec, 30 sec or 60 sec. Teletext Language / button, select Teletext By pressing Language. Press _ / ` button to change Teletext Language to West, East, Cyrillic, Turk/Gre or Arabic. This will normally be set to West for Western Europe. ab DITU6GG QthÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 8 7hqÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 8uhryÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà ! 8yÃTrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 6VUP TqÃTrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 7B AvrÃUrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Ãà TrhpuÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà !!#!$ W8SÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Pss TrÃQthÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà ab Program By pressing / button, select Program. Press _ / ` button to select the program number. You can also enter a number via digit buttons on the remote control. There are 100 program storage between 0 and 99. Band Band can be selected either C or S by pressing _ / ` button. Channel Channel can be changed by _ / ` button or Digit Buttons. Colour System / button, select Colour By pressing System. Press _ / ` button to change the colour system to PAL, PAL60, SECAM or AUTO. Note: In EXT mode, you can choose NTSC 3.58 and NTSC 4.43 as well. Sound System By pressing / button, select Sound System. Press _ / ` button to change the sound system to BG, DK, I or L/L. Fine Tune By pressing / button, select Fine Tune. Press _ / ` button to adjust the tuning. Search By pressing / button, select Search. Press _ / ` button to start program searching. The searching will stop when a signal is ab ab ab ab ab ab ab Install menu By pressing _ / ` button, select the fourth icon. Install menu appears on the screen. ab - 13 - found. You can also enter a frequency value directly by pressing the digit buttons. VCR (Video Cassette Recorder) This item can be seen in all modes except EXT-3, EXT-5 and PC. If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode on. For this, while the cursor is on this item press the _ / ` buttons to set it On. If you want to watch a DVD , then you must set this item off. Store Program By pressing / button, select Store Program. Press _ / ` or OK button to store the adjustments. Program Stored will be displayed on the screen. The first letter of the selected name starts to blink. Press / button to change that letter and _ / ` button to select the other letters. By pressing the RED button, you can store the name. ab Insert: Select the programme which you want to insert by navigation buttons. Press the GREEN button. By navigation buttons move the selected programme to the decided programme space and press the GREEN button again. Delete: To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the selected programme from the programme list, and the programmes below shift one up. APS (Automatic Programming System) When you press the BLUE button for APS, the following warning screen will be displayed. QSPBS6H ab Program menu By pressing _ / ` button, select the fifth icon. Program menu appears on the screen. QSPBS6H ÃÃÃÃÃDUW !ÃÃÃÃÃa9A "ÃÃÃÃÃ8C$ #ÃÃÃÃÃ8ÃÃ! $ÃÃÃÃÃ8ÃÃ$ %ÃÃÃÃÃ8ÃÃ% &ÃÃÃÃÃ8ÃÃ' 'ÃÃÃÃÃ8ÃÃ! (ÃÃÃÃÃ8ÃÃ!" ÃÃÃÃÃ8ÃÃ"$ ÃÃÃÃÃÃ8ÃÃ#" !ÃÃÃÃÃÃ8ÃÃ%# "ÃÃÃÃÃÃ8ÃÃ%' #ÃÃÃÃÃÃTÃÃ# $ÃÃÃÃÃÃÃÃÃÃà %ÃÃÃÃÃÃÃÃÃÃà &ÃÃÃÃÃÃÃÃÃÃà 'ÃÃÃÃÃÃÃÃÃÃà (ÃÃÃÃÃÃÃÃÃÃà !ÃÃÃÃÃÃÃÃÃÃà 8ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà VFÃÃÃÃÃÃÃÃÃà X6SIDIBÃÄ 6yyÃrrqÃth vyyÃirÃqryrrq 1DPH 'HOHWH ,QVHUW $36 PFÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 8hpryÃÃÃÃà By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the AV mode). By cursor action, programme selection is done automatically. Name: To change the name of a decided programme, select the programme and press the RED button. Press the BLUE button to cancel APS if you do not want to delete your existing programme list. To continue APS, first select the country by pressing _ / ` button and then press the RED or OK button. 6QTÃvÃvt VFÃÃÃÃD $$!$ÃÃHu 8hpryÃÃÃÃÃÃÃÃà After APS is finalized, the programme table will appear on the screen. - 14 - Source menu By pressing _ / ` button, select the sixth icon. Source menu appears on the screen. TPVS8@ÃÃ)ÃÃUW UWÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà @YUÃÃÃà ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà PC Picture Position Menu By pressing _ / ` button, select the first icon. PC Picture Position menu appears on the screen. Q8ÃQD8UVS@ÃQPTDUDPI 6vv CÃQvvÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà $ WÃQvvÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà $ 9Ã8ypxÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà $ QuhrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà $ @YUÃÃÃÃ!ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà @YUÃÃÃÃ"ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà @YUÃÃÃÃ#ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà @YUÃÃÃÃ#TÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà @YUÃÃÃÃ$ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà Q8ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà !#&%' In source menu, highlight a source by pressing / button and switch to that mode by pressing _ / ` or OKbutton. ab C)#'xCÃÃÃW)%C Autoposition If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. Select Autoposition item by using buttons. Press ` or OK button. Warning: Auto position adjustment recommended to be done with the full screen image for the proper adjustment. H (Horizontal) Position This item shifts the image horizontally to right hand side or left hand side of the screen. Select H Position item by using ton. V (Vertical) Position This item shifts the image vertically towards the top or bottom of the screen. Select V Position item by using ton. Dot Clock Dot Clock adjustments correct interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. PC Mode Installation Power off both Computer and Display before making any connections. Set your PCs resolution correctly before connecting to the TV. See the table on page 25 for supported modes. Use a D-SUB cable to connect the TVs PC input to the computers RGB output terminal. $ÃQvÃHvvÃ9TiÃ8rp a/ b a / b but- Use _ / ` button to adjust the value. Tighten the screws of the Display cable until the connectors are fastened securely (finger-tighten only). a / b but- Menu System in PC mode Press the button. The menu will be displayed in the middle of the screen. Use _ / ` button to adjust the value. - 15 - Use _ / ` button to adjust the value. Phase Depending on the resolution and scan frequency that you input to the TV Set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. Use _ / ` button to adjust the value. Feature Menu By pressing _ / ` button, select the fourth icon. Feature menu appears on the screen. The items in this menu are described at Feature menu starting page 12. PC Picture Menu By pressing _ / ` button, select the second icon. PC Picture menu appears on the screen. Q8ÃQD8UVS@ 8hÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà #% 7vturÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ" 8yÃUrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃIhyÃÃÃÃÃÃÃÃà SÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà BÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà 7ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà SrrÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà "! "! "! Source menu appears on the screen. In source menu, highlight a source by pressing / button and switch to that mode by pressing _ / ` or OKbutton. Source Menu By pressing _ / ` button, select the fifth icon. ab Sound in PC mode Connect the PCs Audio output to the TVs PC Audio In socket with an audio cable. Other Features TV Status Programme Number, Programme Name, Sound Indicator and Zoom Mode are displayed on the upper right side of the screen when a new programme is entered or button is pressed. Contrast, Brightness and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu. When Colour Temp is Manual, you can also adjust the R,G,B items. R, G and B adjust the TV image colour in PC mode. You can change the TV colour to your desired colour: R (Red), G (Green), B (Blue) Select Reset and press _ / ` or OK button to reset the picture modes to factory default settings. Mute Indicator It is placed in the upper left side of the screen when enabled. To cancel mute, there are two alternatives; button and the first one is pressing the the second one is increasing/decreasing the volume level. Sound Menu By pressing _ / ` button, select the third icon. Sound menu appears on the screen. The items in this menu are described at Sound menu starting page 11. PIP and PAP modes Press the button to switch to PIP mode. At PIP Mode, a small picture (PIP picture) is displayed on the main picture. There are 1 size and 4 positions (upper left, upper right, bottom left and bottom right) available for the - 16 - PIP window. You can use button to change the PIP position. Aspect Ratio of the PIP window is fixed and 4:3. When PIP Mode is entered, the default active window is PIP window and the active window is indicated by a green frame around it. The active window can be changed by pressing the Yellow button. The status info OSD belongs to active window. The place of the status OSDs are same for both windows. For PIP picture restrictions, see table on page 27. Press the mode. button twice to switch to PAP automatically changes the ZOOM mode according to the WSS signal. When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually. Full: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. At PAP Mode, two pictures with equal sizes are displayed on the screen. Aspect Ratios of the windows are fixed. When you switch to PAP Mode, Main window in PIP Mode is displayed on the right side of the screen. The active window can be changed by pressing the Yellow button. Source restrictions of PAP Mode are same as in PIP Mode. It is not possible to show 2 different channels from the TV tuner at the same time. For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the Full mode to restore the picture to its original shape. 16:9 Zoom: This zooms up the wide picture (16:9 aspect ratio) to the full screen. Freeze Picture You can freeze the picture on the screen by pressing the button. At PIP and PAP layouts; only the main picture can be frozen. 16:9 Subtitle: This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Zoom Modes Zoom mode can be changed by pressing the button. You can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes. Note: You can only choose 4:3 and FULL in PC mode. Default Zoom Modes: 4:3 Use to view a normal picture (4:3 aspect ratio) as this is its original shape. Auto: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV - 17 - 14:9 Zoom: This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. a Press the b button page counter searches until the selected page number is located, the desired page is then displayed on the screen. button to move the Teletext Press the screen forward one page at a time. to move the Teletext screen backward one page at a time. Panoramic: This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. To Select Index Page To select the page number of the index (genbutton. erally page 100), press the To Select Teletext With A TV Programme Press the button. The text is now superimposed over the programme on the screen. The top and bottom of the picture are slightly cut off. button again to return to the Press the Teletext page. Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index). To Select Double Height Text Press the button for the top half of the information page to be displayed in double height text. button again for the bottom half Press the of the information page to be displayed in double height text. Press the button once more for the full page of normal height text. To Operate Teletext Select a TV station where Teletext is being transmitted. Press the button. Usually the list of contents (index) is displayed on the screen. To Reveal Concealed Information Pressing the button once will reveal answers on a quiz or games page. button again will conceal Pressing the the revealed answers. To Stop Automatic Page Change To Select A Page Of Teletext Press the appropriate digit buttons for the required Teletext page number. The selected page number is displayed in the top left corner of the screen. The Teletext The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time. button to stop the automatic Press the page change. - 18 - Press the button again to allow the next page to be displayed. Fastext Your TV supports the 1000 page Teletext system. When the page number of any of the 1000 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically. If the requested page is not in memory, the system will search for the requested page number and save the 1000 pages including the requested page into memory after finding it. To Select A Subcode Page Subcode pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time. Select the required Teletext page. Press the button. Select the required subcode page number by pressing four digit buttons (e.g. 0001). If the selected subcode page is not displayed button. TV in a short time, press the programme will be displayed on the screen. Teletext page number will be displayed on the upper left corner of the screen when the selected page is found. button to display the selected Press the Teletext page. Press the button to move the Teletext screen forward one page at a time. screen backward one page at a time. a Press the b button to move the Teletext For Fastext The subject-heading for the information may have a particular colour. Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly. For TOP text TOP text mode of operation will be activated automatically according to the transmission. If TOP text transmission is present, colour coded buttons will appear in status row. If TOP text transmission is not present, status row will not appear. The subject-heading for information may be located in coloured box. PAT (Picture and Text) Press the RED ( ) button to see the programme and teletext at the same time. The screen will be divided into two parts. Teletext will be displayed on the left side of the screen. To Exit Teletext Press the button. The screen will switch to TV mode. To Display The Time While watching a TV programme with Teletext transmission press the button. The current time information, captured from Teletext will be displayed on the screen. If the programme being watched does not have Teletext transmission, no information will be displayed. In Top mode the or commands will request the next or previous page respectively. If TOP text transmission is not available, in case of operation of these commands, wraparound occurs. For example page 100 appears to be one greater than page 199. ab - 19 - Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you where the different (Optional) equipment should be connected at the rear side of the TV. you a corresponding decoder unit to allow the programmes to be unscrambled. For further information ask your dealer. See also the booklet supplied with your decoder. Connect a decoder with an aerial socket to the TV Connect the aerial cable. Connect a decoder without an aerial socket to the TV Connect the decoder to the TV with a Scart cable to SCART 1. High Definition Your Hitachi LCD Television is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI socket (EXT-5) or Component Socket (EXT-3). These sockets can accept either 720p or 1080i signals. TV And Video Recorder Connect the aerial cables. Better picture quality can be obtained if you also connect a Scart cable to SCART sockets. Via The Scart LCD TV has 2 Scart sockets. If you want to connect peripherals (e.g. video, decoder, etc.) which have Scart sockets to the TV, use SCART 1 or SCART 2 inputs. If an external device is connected via the Scart sockets, the TV will be switched to AV mode automatically. Do not connect Digital Set Top Box devices via Scart 1. Use Scart 2. Playback NTSC To use this option you can; Connect an NTSC VCR player to a Scart socket at the rear side of the TV. Connect an NTSC VCR player to RCA Jacks at the side of the TV. Then, press the priate source. button to select appro- Via Aerial Input If you want to connect to your TV, peripherals like video recorders or decoders, but the device you want to connect does not have a Scart socket, you should connect it to the Aerial input of the TV. If the VCR is connected via Aerial input it is suggested to use Programme 0. Copy Facility Source selection for VCR recording. Select Feature menu. Select Ext-2 Out by pressing _ / ` button. Select a source to copy the picture from that source. Search For And Store The Test Signal Of The Video Recorder Unplug the aerial cable from the aerial socket of your video recorder. Switch on your TV and put the video recorder on the test signal. (See the booklet for your video recorder.) Enter the Install menu and select search. Search for the test signal of your video recorder in the same way as you searched for Decoder Cable TV offers you a wide choice of programs. Most of them are free, others are to be paid for by the viewer. This means that you will need to subscribe to the broadcasting organisation whose programmes you wish to receive. This organisation will supply - 20 - and stored the TV signals. Store the test signal under programme number 0. Replace the aerial cable in the aerial socket of your video recorder once you have stored the test signal. Connecting External Speakers Connect the "Scart Adaptor" supplied with your TV (seen below) to Scart 2 socket to use it as an output socket. This adaptor includes a switch to select between input and output. Select "Output" and use Audio sockets to connect an amplifier and external speakers to your TV. Camera And Camcorder To Connect To AV Input Connect your camera or camcorder to AV (EXT-4) input at the right side of the TV. Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs. You must connect the jacks to the input using the same colour. To Connect To S-VHS Input Connect your camera or camcorder S-VHS input at the right side of the TV. Connect your equipment to the TV via S-VHS input and audio inputs of AV inputs by using S-VHS cables. Connect The Decoder To The Video Recorder Some video recorders have a special Scart socket for decoder. Connect a Scart cable to the Scart socket of your decoder and to the special Scart socket of your video recorder. Refer to the booklet of your video recorder. To connect your video recorder to the TV, refer to the TV and Video Recorder section. If you want to connect more equipment to your TV, consult your dealer. Note: If you use the S-VHS socket of the Scart Adaptor, you will only get a black and white image. Connecting Headphones Use the stereo headphone socket at the right side of the TV, to connect headphones. - 21 - Aerial Connection PqÃ6rvhyÃ8rpv SqÃ&$ÃuÃphvhyÃphiyr : 9+)8+) SrhÃsÃUW Connect Peripheral Equipment rvurÃprpÃurÃhrvhyÃhvtuÃÃÃUW ÃprpÃurÃhrvhyÃutuÃhÃW8S UA UG8 9ÃU W 6 rvhyÃSAÃTpxr SAÃprp yrhqÃW 8SÃÃUW 6 rvhyÃSAÃTpxrÃW8S hyy 6rvhyÃSAà Grhq pxr 6rvhyÃSAÃTpxr hyy 6 rvhyÃSAà Grhq $9 pxr $17 ,1 $9 W8S ÃDÃvÃrprqrqÃuhÃhÃphÃyrhqÃuyqÃirÃsvrqÃirrrÃÃUWÃhqà W8SÃà r uhprà ÃvprÃhqÃqÃhyvÃTphÃyrhqÃhrà rrvhyà vsÃÃuhrÃhÃrrÃUWÃhqÃW8SÃhqÃvuÃÃihvÃrrÃqÃsà ÃrvrÃUurrÃyrhqÃphÃirÃpuhrqÃsÃÃCvhpu vÃqrhyrà à hÃtqà Cvtu à Trrà ryrpvphyà rhvyr ÃutuÃhÃW8SÃhqÃhryyvrÃqrpqr UA UG89 ÃUW ÃutuÃhÃhryyvrÃqrpqr SAÃGrhqÃsà W8SÃÃUW ÃTphÃGrhqÃà ÃÃ@YU ÃÃUW UA UG89ÃU W SAÃGrhqà sÃW8SÃà Thryyvr 79 $17 ,1 9& 5 Ã6rvhyà SAÃGr hqÃs Th r yyvrÃÃUWà ÃTphÃGrhqÃà ÃÃ@YU ÃÃUW Ã6 rvhyà SAÃGr hqÃà 6 rvhyà ThryyvrÃGI7Ãyrhq $ 17, 1 79 9&5 $17 ,1 SAÃGrhqÃà 6rvhyà $9 Th r yyvrÃGI7Ãyrhq $9 W8S urhqurÃprpv phpqrÃprpv Crhqur 6qv ÃD / 5 98ÃDI DIPVU 287 WvqrÃD T WCT ÃD 69+6 6 9 + 6 / 5 6WÃDIPV U - 22 - Tips Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Remote Control Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons at the bottom of the TV. Have you selected the wrong menu? Press button to return to TV mode or press the button to return to the previous menu. the Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or Teletext unrecognisable? Check if you have entered the correct frequency. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals. No solution: Switch your TV set off and on. If this does not work, call the service personnel; never attempt to repair it yourself. No Picture Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer. No Picture could mean that your TV is not receiving a transmission. Have you selected the correct button on the remote control?Try once more. Sound You can not hear any sound. Did you perhaps interrupt the sound, pressing the button? Sound is coming from only one of the speakers.Is the balance set to one extreme? See Sound menu. - 23 - Specifications TV BROADCASTING PAL/SECAM B/G D/K K' I/I' L/L' RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) NUMBER OF PRESET CHANNELS CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz. AUDIO German+Nicam Stereo AUDIO OUTPUT POWER (WRMS.) (%10 THD) 2x8 POWER CONSUMPTION (W) (max.) 180 W < 3 W (Stand-by) PANEL 16:9 display, 32 Screen Size DIMENSIONS (mm) 9DH@ITDPITà 9 G C X rvtuÃxt 100 X vuÃs X vuÃÃs ISO 13406-2 Pixel fault class: Class II - 24 - Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1366x 768, vertical sync. frequency range of 56-85 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes. H qr S r y v C v hy W rvphy Ar r pà C ÃxC WrÃC %# ! Ã" # $ % & ' ( %# '#' %# %# %# ' ' ' ' ' ! " # $ % & à ' à ( ! !# !# !# !# $! !' !' !' "%% # #' #' #' #' #' % % % % % &%' &%' &%' &%' '%# !# &%' &%' &%' " " " $ $ & % % &! &$ '$ $% % &! &$ '$ % & &$ '$ &$ % % & % "&( "&$ #"" "$! "&( #' #%( $"& #'# $%$ % %'& %&$ %# #&' $% #&& * Only available in Full and PAP modes, not in 4:3 mode. - 25 - Appendix B: DVD Player Selection You can use this remote control to operate the selected brand of DVD player by pressing the following buttons on the remote control simultaneously. 7hqÃsÃ9W9ÃQyhr Cvhpuv Qvrr Qhhvp Uuvih Quvyv EW8 Tht T Qr DIAP DIAP DIAP DIAP DIAP DIAP DIAP DIAP ! " # $ % & ' 7hqÃsÃ9W9ÃQyhr S86 Hvivuv Px arvu Pv Tuvp Txu 7ix Qr DIAP DIAP DIAP DIAP DIAP DIAP DIAP DIAP ( DI9@Y HDY TV7ÃQ6B@ VQ96U@ S@W@6G UWU@YU Example To operate HITACHI DVD player, press and hold the INFO button, followed by the 1 button. DIAPÃi UWU@YUÃi TV7ÃQ6B@Ãi DI 9@YÃi VQ96U@Ãi HDYÃi S@W@6GÃi Note: Not all models of the listed brands can be operated using this remote control. - 26 - Appendix C: Main and PIP-PAP Picture Combinations H6D I UVI@S