USER'S MANUAL 42PD4200 Thank you very much for purchasing the HITACHI Plasma Display Monitor. Before using your monitor, please carefully read the "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" so you will know how to operate the monitor properly. Keep this manual in a safe place. You will find it useful in the future. Notes on lnstallation Work: This product is marketed assuming that it is installed by qualifed personnel with enough skill and competence. Always have an installation specialist or your dealer install and set up the product. HITACHI cannot assume liabilities for damage caused by mistake in installation or mounting, misuse, modification or a natural disaster. Note for Dealers: After installation, be sure to deliver this manual to the customer and explain to the customer how to handle the product. 1 ENGLISH Important Please read this User's Manual thoroughly, especially the Safety Instructions on Page 4 to 7. Mis-use may cause damage to your plasma monitor, which could shorten its lifespan, or cause injury to yourself. Should you encounter any difficulty in the set-up or operation of your monitor, firstly refer to the Troubleshooting guide at the rear of this manual. In the unlikely event of a problem occurring with your plasma monitor, switch off at the mains sockets, pull out the plugs, and contact your dealer immediately. FEATURES Extended definition plasma display panel The 42-inch colour plasma display panel, with a resolution of 852(H) x 480(V) pixels, creates a high-definition, large-screen (aspect ratio : 16:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient power lines, the panel produces high-quality display images free from colour misconvergence and display distortion. CAUTION Under no circumstances remove the rear cover of your plasma monitor. Never guess or take any chances with electrical equipment of any kind - it is better to be safe than sorry! High Performance Digital Processor A wide range of personal computer signals can be handled, from 640 x 400, 640 x 480 VGA to 1600 x 1200 UXGA. (RGB Analog input) Easy-to-use remote control and on screen display system The remote control included eases the work of setting display controls. Further, the on-screen display system, displays the status of signal reception and display control settings in an easy-to-view fashion. Software Notice It is prohibited for the end user of this product to copy, reverse engineer or reverse compile the software included therein, save to the extent permitted by law. Power saving system The International ENERGY STAR® power saver feature saves power consumption automatically when input signals are not available. When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle. Plasma Monitor After the plasma monitor has been on for any length of time, you will notice that the screen becomes warm. Please note that this is normal. Sometimes the screen might have some tiny bright or dark spots. Please note that this is normal. TruBass TruBass, SRS and (O) symbol are trademarks of SRS Labs,Inc. TruBass technology is incorporated under license from SRS Labs, Inc. CAUTION To prevent scratches or damages to the plasma screen, do not knock or rub the surface with sharp or hard objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Do not use harsh or abrasive cleaners! About the Optional Video Unit The following functions can be obtained by connecting the optional video unit. (1) A composite/S terminal and two component terminals have been added. A composite video output terminal is also provided as a monitoring output. (2) A wide range of devices other than personal computers can also be connected. (3) A component input is possible to switch to RGB signals from the Menu screen. (4) A SCART terminal is also provided for the signal of the European standard. It operates as composite/S/RGB input terminal, or video output terminal. CAUTION Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth. Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc. especially because they would cause discoloration, scratches or cracks. Options Ask your local retail dealer for further details. 1. Desktop stand: · CMPAD23 (for 32") · CMPAD25 (for 42") 2. Plasma monitor speaker: · CMPAS03 (for 32") bass reflex speaker unit with 16x4.5cm cone type speaker (colour: dark gray) · CMPAS03S (for 32") same type to CMPAS03 (colour: light gray) · CMPAS14 (for 42") 2 way speaker unit with one 2.5cm dome type tweeter and two 8cm round type woofers (colour: dark gray) · CMPAS14S (for 42") same type to CMPAS14 (colour: light gray) 3. Video unit: CMPAVW1 An expansion unit for viewing video with this device. 2 CONTENTS ENGLISH 3 FEATURES ....................................................2 SAFETY INSTRUCTIONS ..............................4 COMPONENT NAMES ..................................8 Main Unit..............................................................................8 Remote control ....................................................................9 Loading Batteries ..............................................................9 Handling the Remote Control ............................................9 OTHER FEATURES ....................................22 Automatic Store ................................................................22 Signal Check ....................................................................23 Power Save Mode..............................................................23 IMAGE RETENTION OF PLASMA DISPLAY ......24 NOTES ........................................................24 TROUBLESHOOTING ..................................25 Symptoms That Seemingly Appear to be Failures ............25 Actions to Correct Abnormal Displays ..............................27 Video Unit Function ..........................................................28 Tuner Unit Function ..........................................................38 INSTALLATION INSTRUCTIONS ................11 Installation..........................................................................11 Anti-tumble measures........................................................11 Connecting to a PC ..........................................................12 Mounting the Speaker Unit ..............................................13 Power Cord Connection ....................................................13 PRODUCT SPECIFICATIONS ......................49 Signal Input........................................................................50 Recommended Signal List ................................................51 OPERATING INSTRUCTIONS ....................14 Turning Power On and Off ................................................14 Input Switching ..................................................................15 Volume Adjustment............................................................15 Audio Mute ........................................................................15 Size Switching ..................................................................16 Input Signal Screen Display ..............................................16 Using the Menu Screen ....................................................17 PICTURE MENU ................................................................18 AUDIO MENU ....................................................................19 TIMER MENU ....................................................................19 FUNCTION MENU ............................................................20 SETUP MENU ....................................................................21 LANGUAGE MENU............................................................22 Notes about This Manual · The information in this manual is subject to change without notice. · While meticulous care has been taken in the preparation of this manual, you are requested to notify your dealer or us should you have any comments, views or questions about our product. · Fully understand the prerequisites to using the product, such as hardware and software specifications and constraints, in using the product. We are not held liable for damages caused by improper handling of the product. · Reproduction of this manual in whole or in part without our prior written permission is prohibited. · The product names mentioned in this manual may be trademarks or registered trademarks of their respective owners. SAFETY INSTRUCTIONS This Plasma monitor has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Before using this product, please read and understand the Safety Instructions thoroughly to ensure correct usage, and follow all the instructions. About the Symbols Various symbols are used in this manual, the user's manual and on the product itself to ensure correct usage, to prevent danger to the user and others, and to prevent property damage. The meanings of these symbols are described below. It is important that you read these descriptions thoroughly and fully understand the contents. WARNING CAUTION Typical Symbols This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. This symbol indicates information that, if ignored, could result possibly in personal injury or physical damage due to incorrect handling. This symbol indicates an additional warning (including cautions). An illustration is provided to clarify the contents. This symbol indicates a prohibited action. The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that disassembly is prohibited). This symbol indicates a compulsory action. The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that the power plug should be disconnected from the power outlet). WARNING Never use the monitor if a problem should occur. Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing, elements, cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure Disconnect the that the smoke or odor has stopped, contact your dealer. Never attempt to make repairs yourself because this could be plug from the power outlet. dangerous. Do not insert liquids or foreign objects. Penetration of liquids or foreign objects could result in fire or electrical shock. Use special caution in households where children are present. If liquids or foreign objects should enter the projector, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer. · Do not place the monitor in a bathroom. · Do not expose the monitor to rain or moisture. · Do not place flower vases, pots, cups, cosmetics, liquids such as water, etc on or around the monitor. · Do not place metals, combustibles, etc on or around the monitor. Never disassemble or modify the monitor. The monitor contains high voltage components. Modification could result in fire or electrical shock. · Never remove any fixed cover. Do not disassemble. Do not give the monitor any shock or impact. If the monitor should be shocked and/or broken, it could result in an injury, and continued use could result in fire or electrical shock. If the glass panel is broken or damaged, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer. Do not place the monitor on an unstable surface. If the monitor should be dropped and/or broken, it could result in an injury, and continued use could result in fire or electrical shock. · Do not place the monitor on an unstable, slant or vibrant surface such as a wobbly or inclined stand. Do not obstruct the ventilation of the monitor. If the ventilation is obstructed during the operation of the monitor or just after switching off the power, it could result in damage and shorten the lifespan of your monitor due to overheating. Make sure there is ample ventilation. · Keep a space of 100mm (10cm) or more between the sides, rear and top of the monitor and other objects such as walls. · Do not place anything around ventilation openings of the monitor. · Never block ventilation openings. · Do not put the plasma screen side up. · Do not cover the monitor with a tabl ...