Operating Manual RTH3100C Non-Programmable Digital Thermostat 69-1890EF-1 Need Help? For assistance with this product please visit http://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502 Read and save these instructions. ® U.S. Registered Trademark. Patents pending. Copyright © 2006 Honeywell International Inc. All rights reserved. RTH3100C Table of contents About your new thermostat Thermostat features................................... 2 Quick reference to controls ....................... 3 Quick reference to display ........................ 4 Appendices Battery replacement .................................. 9 In case of difficulty................................... 10 Customer assistance ............................... 12 Accessories ............................................. .12 1-year limited warranty ............................ 13 Thermostat Operation System switch (Heat/Cool) ........................ 5 Fan switch (Auto/On) ................................. 6 Temperature controls ................................. 7 Compressor protection .............................. 8 1 Operating Manual About your new thermostat Congratulations on the purchase of your new Honeywell thermostat. It has been designed to give you many years of reliable service and easy-to-use, push-button climate control. Features · One-touch temperature controls · Large, clear backlit display is easy to read, even in the dark · Switchable fan control (auto or continuous fan) · Displays both room temperature and temperature setting · Built-in compressor protection RTH3100C Quick your new to controls About reference thermostat Digital display screen Temperature adjustment Press to adjust temperature settings. System switch (see page 5) · Cool: Cooling system control. · Off: All systems off. · Heat: Heating system control. · Em Heat: Emergency & Auxiliary Heat control. Compressor is locked out. Fan Switch (see page 6) On: Fan runs continuously. Auto: Fan runs only when heating or cooling system is on. 3 Operating Manual Quick reference to display screen Current inside temperature 75 Replace Batt Inside 75 Set To Temperature setting Heat On Low battery warning System Status · Cool On: Cooling system is on. · Heat On: Heating system is on. · Em: Emergency heat is on. · Aux: Auxiliary heat is on. If flashing, compressor protection is engaged (see page 8). RTH3100C System switch The SYSTEM switch can be set to control your heating or cooling system, depending on the season. · Cool: Cooling system control. · Off: All systems are off. · Heat: Heating system control. · Em Heat: Emergency & Auxiliary Heat control. Compressor is locked out. CAUTION: EQUIPMENT DAMAGE HAZARD. Do not operate cooling system when outdoor temperature is below 50°F (10°C). Set SYSTEM switch to control the heating or cooling system. Operating Manual Fan switch Set the FAN switch to Auto or On. In "Auto" mode (the most commonly used setting), the fan runs only when the heating or cooling system is on. If set to "On," the fan runs continuously. Use this setting for improved air circulation, or for more efficient air cleaning. Set FAN switch to choose whether the fan runs continuously or only as needed. RTH3100C Temperature controls About your new thermostat Press the temperature adjustment buttons until the temperature you want is displayed in the upper right portion of the screen. Note: Make sure the SYSTEM switch is set to the system you want to control (Heat or Cool). 78 Inside 75 Set To Cool On Desired temperature Temperature adjustment buttons Operating Manual Built-in compressor protection 75 Inside 75 Set To This feature helps prevent damage to the compressor in your air conditioning or heat pump system. Damage can occur if the compressor is restarted too soon after shutdown. This feature forces the compressor to wait for a few minutes before restarting. During the wait time, the display will flash the message Cool On or Heat On. When the safe wait time has elapsed, the message stops flashing and the compressor turns on. Cool On Message flashes until safe restart time has elapsed. RTH3100C Battery replacement Pull at bottom to remove thermostat from wallplate. Turn thermostat over, insert fresh AA alkaline batteries, then reinstall thermostat. Batteries are optional if your thermostat was wired for AC power when installed. Install fresh batteries immediately when the REPLACE BATT warning begins flashing. Even if the warning does not appear, you should replace batteries once a year, or before leaving home for more than a month. Batteries provide backup power to the display during power interruptions. All settings are permanently stored in memory, and do not require battery power. Operating Manual In case of difficulty If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank · · · · · · · · · · Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. Make sure fresh AA alkaline batteries are correctly installed (see page 9). Set system switch to Heat (see page 5). Make sure the temperature is set higher than the Inside temperature. Set system switch to Cool (see page 5). Make sure the temperature is set lower than the Inside temperature. Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. Wait 5 minutes for the system to respond. 10 Heating or cooling system does not respond RTH3100C In case of difficulty Temperature settings do not change "Cool On" or "Heat On" is flashing "Heat On" is not displayed "Cool On" is not displayed Make sure heating and cooling temperatures are set to acceptable ranges: · Heat: 40° to 90°F (4.5° to 32°C). · Cool: 50° to 99°F (10° to 37°C). · Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor (see page 8). Set the System switch to Heat, and set the temperature level above the current room temperature (see page 7). Set the System switch to Cool, and set the temperature level below the current room temperature (see page 7). · · 11 Operating Manual Customer assistance Pull at bottom to remove thermostat from wallplate. For assistance with this product, please visit http://yourhome.honeywell.com. Or call Honeywell Customer Care toll-free at 1-800-468-1502. To save time, please note your model number and date code before calling. Turn thermostat over to find model number and date code. Accessories/replacement parts To order, please call Honeywell Customer Care toll-free at 1-800-468-1502. Cover plate*...................Part No. 50002883-001 *Use to cover marks left by old thermostats. 1 RTH3100C 1-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's option). If the product is defective, (i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or (ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination whether the product should be returned to the following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product can be sent to you. This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer. Honeywell's sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr., Golden Valley, MN 55422 or call 1-800-468-1502. In Canada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9. 13 Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 http://yourhome.honeywell.com Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Scarborough, Ontario M1V 4Z9 ® U.S. Registered Trademark. © 2006 Honeywell International Inc. 69-1890EF-1 M.S. Rev. 04-06 Manuel d'utilisation RTH3100C Thermostat numérique non programmable 69-1890EF-1 Besoin d'aide? Pour obtenir de l'assistance au sujet de ce produit, consulter le http://yourhome.honeywell.com ou téléphoner sans frais au Centre de service à la clientèle de Honeywell au 1 800 468-1502 Instructions à lire et à conserver. ® Marque de commerce déposée aux É.-U. Brevets en instance. Droit d'auteur © 2006 Honeywell International Inc. Tous droits réservés. RTH3100C Table des matières À propos du thermostat Caractéristiques du thermostat................2 Consultation rapide des commandes .....3 Consultation rapide de l'écran..................4 Annexes Remplacement des piles ........................... 9 En cas de problème ................................. 10 Assistance à la clientèle .......................... 12 Accessoires .............................................. 12 Garantie limitée ....................................... 13 Fonctionnement du thermostat Commutateur du système (Heat/Cool) ............................................... 5 Commutateur du ventilateur (Auto/On).................................................. 6 Commandes de température .................. 7 Protection du compresseur .................... 8 1 Manuel d'utilisation À propos du thermostat Félicitations pour l'achat de votre nouveau thermostat Honeywell. Il a été conçu pour vous offrir de nombreuses années de fonctionnement fiable et de réglage d'ambiance au moyen de simple commandes à boutons-poussoirs. Caractéristiques · Commandes de température à touche unique · Grand écran transparent et rétroéclairé, facile à lire même dans le noir · Réglage de ventilateur (fonctionnement automatique ou continu) · Affiche à la fois la température ambiante et la température programmée · Protection du compresseur intégrée RTH3100C Consultation rapide des commandes About your new thermostat Écran d'affichage numérique Touches de température Appuyer pour régler la température. Commutateur Fan (voir page 6) On : Le ventilateur fonctionne sans interruption. Auto : Le ventilateur fonctionne seulement quand le système est en marche. 3 Commutateur System (voir page 5) · Cool : Réglage du système de climatisation. · Off : Tous les systèmes sont arrêtés. · Heat : Réglage du système de chauffage. · Em Heat : Réglage du chauffage auxiliaire et d'urgence. Le compresseur est verrouillé. Manuel d'utilisation Consultation rapide de l'écran Température intérieure actuelle Réglage de température Indicateur de faiblesse des piles 75 Replace Batt Inside 75 Set To Heat On Un clignotement indique que la protection du compresseur est activée (voir page 8). État du système · · · · Cool On : Système de climatisation en marche. Heat On : Système de chauffage en marche. Em : Chauffage d'urgence en marche. Aux : Chauffage auxiliaire en marche. RTH3100C Commutateur du système Le commutateur SYSTEM peut être configuré pour régler votre système de chauffage ou de climatisation, selon la saison. · · · · Cool : Réglage du système de climatisation. Off : Tous les systèmes sont arrêtés. Heat : Réglage du système de chauffage. Em Heat : Rà ...