User manual HONEYWELL SERIE 2000

Series 2000 Commercial Microelectronic Thermostat Contents Features .................................................................. 3 Programming ........................................................... 4 Troubleshooting ...................................................... 18 ® U.S. Registered Trademark Copyright © 1996 Honeywell Inc. · All Rights Reserved 1 63-4356-1 63-4356--1 ENTER UNOCCUPIED PROGRAM MODE ENTER OCCUPIED PROGRAM MODE SET CURRENT DAY OR PROGRAM DAY SET OCCUPIED TEMPERATURE SETPOINTS SET UNOCCUPIED TEMPERATURE SETPOINTS AM Mon Occupied System Heat Room Fan Auto RETURNS TO NORMAL OPERATIONS Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp INCREASE TEMPERATURE OR TIME SETTING SET OVERRIDE TEMPERATURE OFFSET AND ACTIVATE TEMPORARY OVERRIDE Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continuous Unoccupied System Fan DECREASE TEMPERATURE OR TIME SETTING ENTER HOLD MODE SET CURRENT DAY AND TIME CLEAR PROGRAM PERIOD SELECT SYSTEM OPERATION COPY ONE PROGRAMMED DAY TO ANOTHER DAY SELECT FAN OPERATION CHANGE BETWEEN HEATING AND COOLING SETPOINTS M10256 63-4356--1 2 FEATURES · Program up to two Occupied and two Unoccupied time periods for each daily schedule. · Set different schedules for each day of the week. · Temporary temperature overrides. · Program copy key. 3 63-4356--1 PROGRAMMING The keyboard is located behind the thermostat cover. Sixteen keys are used to set, review and modify programmed times and temperature settings. The thermostat display shows day, time, program period and temperature. The thermostat can be set for two Occupied and two Unoccupied times for each day of the week (28 independent time settings). Temporary Occupied key provides quick temporary temperature changes for increased occupant comfort. The Continuous Unoccupied key provides energy efficient operation for extend periods of time. Before starting the program procedure, use the following chart to organize the program schedule. 63-4356--1 4 Day Monday Tuesday Wednesday Thursday Friday Saturday Sunday Occupied Period 1 Unoccupied Period 1 Occupied Period 2 Unoccupied Period 2 5 63-4356--1 The program has four temperature settings, Occupied and Unoccupied heat and cool. The thermostat will operate at the Unoccupied temperature setting unless the thermostat is programmed. The following chart shows the default temperature settings. Occupied Setpoint Control Default Desired Heating 70°F (21°C) Cooling 78°F (25.5°C) Unoccupied Setpoint Default 55°F (13°C) 90°F (32°C) Desired Setting Current Day and Time Press Set Current Day/Time. NOTE: On initial power up or after an extended power loss, 1:00 pm flashes on the LCD until a key is pressed. Set Day/Time Set Current Day/Time Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp PM Mon Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4951B 63-4356--1 6 Press Day until the current day is displayed. NOTE: Sun = Sunday, Mon = Monday, Tue = Tuesday, Wed = Wednesday, Thu = Thursday, Fri = Friday, Sat = Saturday. Set Day/Time Press Run Program. Run Program AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Room Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Mon Occupied 1 System Heat Fan Auto M4954A Day Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp PM Tue Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4952B Setting Program Times Press Occupied Start Time. NOTE: Anytime a start time is not required, press the Clear Start Time. Set Program Start Time Press increase or decrease key until the current time is displayed. NOTE: Tapping the Set Current Day/Time will change the time in one hour increments. Set Day/Time Set Program Run Program Occupied Start Time Unoccupied Start Time Day Occupied Start Time AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Mon Occupied 1 Continous Unoccupied System Fan M4955A Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp PM Tue Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4953B 7 63-4356--1 Press Day until the desired day is displayed. Set ProgramStart Time Press Occupied Start Time a second time to set a second Occupied Start Time. Set ProgramStart Time Day Run Program Occupied Start Time Temporary Occupied Set Current Day/Time Continous Unoccupied AM Set Program Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Clear Start Time Copy Heat/Cool Settings Wed Occupied 1 System Fan Occupied Start Time M4956A Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Wed Occupied 2 Continous Unoccupied System Fan M4958B Press increase or decrease key until the desired start time is displayed. NOTE: The program times are in fifteen minute intervals. (Example: 8:00, 8:15, 8:30). Set ProgramStart Time AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Press increase or decrease key until the desired start time is displayed. Set ProgramStart Time PM Wed Occupied 2 Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4959A Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Wed Occupied 1 Continous Unoccupied System Fan Press Unoccupied Start Time. M4957A Set Program Start Time Unoccupied Start Time Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp PM Wed UnOccupied 1 Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4960A 63-4356--1 8 Press increase or decrease key until the desired start time is displayed. Set ProgramStart Time Set Program Run Program Occupied Start Time Unoccupied Start Time Day Press increase or decrease key until the desired start time is displayed. Set ProgramStart Time PM Wed UnOccupied 2 Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp PM Wed UnOccupied 1 Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Continous Unoccupied System Fan M4961A M4963A Press Unoccupied Start Time a second time to set a second Unoccupied Start Time. Set Program Start Time Copying a Day NOTE: The thermostat must be in the program mode to use the copy feature. Go to step 2 if the thermostat is already in the program mode. Unoccupied Start Time Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Wed UnOccupied 2 Continous Unoccupied System Fan M4962B Press Occupied Start Time. Set Program Start Time Occupied Start Time AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Tue Occupied 1 Continous Unoccupied System Fan M10255 9 63-4356--1 Press Day to select the day to be copied if different from the day displayed. Set Program Start Time Press Day until the day to be copied to is displayed. Day Run Program Occupied Start Time Temporary Occupied Set Current Day/Time Continous Unoccupied Day Run Program Occupied Start Time Temporary Occupied Set Current Day/Time Continous Unoccupied AM Set Program Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Set Program Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Clear Start Time Copy Heat/Cool Settings Wed Occupied 1 Wed Thu Clear Start Time Copy Heat/Cool Settings System Fan System Fan M4966A M4968A Press Copy. Copy Run Program Occupied Start Time Temporary Occupied Set Current Day/Time Continous Unoccupied Press Copy. NOTE: donE will be displayed for two seconds and then the normal program display will be shown. M4967A Set Program Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Wed Clear Start Time Copy Heat/Cool Settings System Fan Copy Run Program Occupied Start Time Temporary Occupied Set Current Day/Time Continous Unoccupied Set Program Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Clear Start Time Copy Heat/Cool Settings System Fan M4969A 63-4356--1 10 Repeat steps desired. through for all the days Press Occupied Temp. Set Program Setting Press Run Program. Run Program AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Occupied Temp Room Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Heat Occupied Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4970B Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Mon Occupied 1 System Heat Fan Auto M4954A Press increase or decrease key until the desired temperature is displayed. Set Program Setting Setting Program Temperature Setpoints NOTE: The setpoint temperature range is 40 to 90°F (7 to 31°C) for heating and 45 to 99°F (9 to 37°C) for cooling. Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Heat Occupied Continous Unoccupied System Fan M4971B 11 63-4356--1 Press Heat/Cool Settings to change between heat and cool settings. Set Program Press Unoccupied Temp. Set Program Setting Setting Heat/Cool Settings Unoccupied Temp Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature