Operating Manual PRO TH3000 Series Non-Programmable Digital Thermostat 69-1776EF-1 This manual covers the following models: TH3110D: For 1 Heat/1 Cool systems TH3210D: For 2 Heat/1 Cool heat pump systems only (Pull thermostat from wallplate and turn over to find model number.) CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do not operate cooling system when outdoor temperature is below 50°F (10°C). Need Help? For assistance with this product please visit http://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502 Read and save these instructions. ® U.S. Registered Trademark. Patents pending. Copyright © 2006 Honeywell International Inc. All rights reserved. PRO TH3110D / TH3210D Table of contents About your new thermostat Thermostat features................................... 2 Quick reference to controls ....................... 3 Quick reference to display ........................ 4 Appendices Battery replacement .................................. 9 In case of difficulty................................... 10 Customer assistance ............................... 12 Accessories ............................................. .12 5-year limited warranty ............................ 13 Thermostat Operation System switch (Heat/Cool) ........................ 5 Fan switch (Auto/On) ................................. 6 Temperature controls ................................. 7 Compressor protection .............................. 8 1 Operating Manual About your new thermostat Your new Honeywell thermostat has been designed to give you many years of reliable service and easy-to-use, push-button climate control. Features · Large, clear, backlit display is easy to read, even in the dark. · Displays both room temperature and temperature setting. · Built-in compressor protection. 2 PRO TH3110D / TH3210D Quick your new to controls About reference thermostat Digital display screen Temperature adjustment (see page 7) Fan Switch (see page 6) On: Fan runs continuously. Auto: Fan runs only when heating or cooling system is on. 3 System switch (see page 5) · Cool: Cooling system control. · Off: All systems off. · Heat: Heating system control. · Em Heat: Emergency & Auxiliary Heat control. Compressor is locked out. (Select models only.) Operating Manual Quick reference to display screen Current inside temperature 75 Replace Batt Inside 75 Set To Temperature setting Low battery warning (see page 9) Em Aux Heat On System Status · Cool On: Cooling system is on. · Heat On: Heating system is on. · Em: Emergency heat is on. ** · Aux: Auxiliary heat is on. ** ** Only for heat pumps with this capability (select models only). If "Heat On" or "Cool On" is flashing, compressor protection is engaged (see page 8). PRO TH3110D / TH3210D System switch The SYSTEM switch can be set to control your heating or cooling system, depending on the season. · Cool: Cooling system control. · Off: All systems are off. · Heat: Heating system control. · Em Heat: Emergency & Auxiliary Heat control. Compressor is locked out. (Select models only.) Set SYSTEM switch to control the heating or cooling system. CAUTION: EQUIPMENT DAMAGE HAZARD. Do not operate cooling system when outdoor temperature is below 50°F (10°C). Operating Manual Fan switch Set the FAN switch to Auto or On. In "Auto" mode (the most commonly used setting), the fan runs only when the heating or cooling system is on. If set to "On," the fan runs continuously. Use this setting for improved air circulation, or for more efficient air cleaning. Set FAN switch to choose whether the fan runs continuously or only as needed. PRO TH3110D / TH3210D Temperature controls About your new thermostat Press the temperature adjustment buttons until the temperature you want is displayed in the upper right portion of the screen. Note: Make sure the SYSTEM switch is set to the system you want to control (Heat or Cool). 78 Inside 75 Set To Cool On Desired temperature. Temperature adjustment buttons. Operating Manual Built-in compressor protection 75 Inside 75 Set To This feature helps prevent damage to the compressor in your air conditioning or heat pump system. Damage can occur if the compressor is restarted too soon after shutdown. This feature forces the compressor to wait 5 minutes before restarting. During the wait time, the display will flash the message Cool On (or Heat On if you have a heat pump). When the safe wait time has elapsed, the message stops flashing and the compressor turns on. Cool On Message flashes until safe restart time has elapsed. PRO TH3110D / TH3210D Battery replacement Pull at bottom to remove thermostat from wallplate. Batteries are optional (for backup power) if your thermostat was wired to run on AC power when installed. Install fresh batteries when the REPLACE BATT warning begins flashing. The warning flashes about two months before the batteries are depleted. Replace batteries once a year, or before leaving home for more than a month. Batteries provide backup power to the display during power interruptions. All settings are permanently stored in memory, and do not require battery power. Turn thermostat over, insert fresh AA alkaline batteries, then reinstall thermostat. Operating Manual In case of difficulty If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank · · · · Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. Make sure fresh AA alkaline batteries are correctly installed (see page 9). Heating or cooling system does not respond · · · Set system switch to Heat (see page 5). Make sure the temperature is set higher than the Inside temperature. Set system switch to Cool (see page 5). Make sure the temperature is set lower than the Inside temperature. Wait 5 minutes for the system to respond. 10 PRO TH3110D / TH3210D In case of difficulty Temperature settings do not change "Cool On" or "Heat On" is flashing "Heat On" is not displayed "Cool On" is not displayed Make sure heating and cooling temperatures are set to acceptable ranges: · · · Heat: 40° to 90°F (4.5° to 32°C). Cool: 50° to 99°F (10° to 37°C). Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor (see page 8). Set the System switch to Heat, and set the temperature level above the current room temperature (see page 7). Set the System switch to Cool, and set the temperature level below the current room temperature (see page 7). · · 11 Operating Manual Customer assistance Pull at bottom to remove thermostat from wallplate. For assistance with this product, please visit http://yourhome.honeywell.com. Or call Honeywell Customer Care toll-free at 1-800-468-1502. To save time, please note your model number and date code before calling. Turn thermostat over to find model number and date code. Accessories/replacement parts To order, please call Honeywell Customer Care toll-free at 1-800-468-1502. Cover plate assembly* ........ Part No. 50002883-001 *Use to cover marks left by old thermostats. 12 PRO TH3110D / TH3210D 5-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of five (5) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's option). If the product is defective, (i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or (ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination whether the product should be returned to the following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product can be sent to you. This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer. Honeywell's sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, 13 Operating Manual 5-year limited warranty INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE FIVE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-468-1502. In Canada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9. 1 Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 http://yourhome.honeywell.com Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Scarborough, Ontario M1V 4Z9 ® U.S. Registered Trademark. © 2006 Honeywell International Inc. 69-1776EF-1 M.S. Rev. 04-06 Mode d'emploi Série PRO TH3000 Thermostat numérique non programmable 69-1776EF-1 Le présent mode d'emploi porte sur les modèles suivants : TH3110D : Pour systèmes à 1 étage de chauffage/1 étage de refroidissement TH3210D : Pour thermopompes à 2 étages de chauffage/1 étage de refroidissement seulement (Retirer le thermostat de la plaque murale et le retourner pour trouver le numéro de modèle.) MISE EN GARDE : RISQUE DE DOMMAGE MATÉRIEL Pour éviter d'endommager le compresseur, ne faites pas fonctionner le système de refroidissement lorsque la température extérieure est inférieure à 10 °C (50 °F). Besoin d'aide? Pour obtenir de l'aide sur ce produit Honeywell, veuillez consulter le site Web http://yourhome.honeywell.com ou adressez-vous au Service à la clientèle de Honeywell en composant sans frais le 1-800-468-1502 Veuillez lire le mode d'emploi et le conserver en lieu sûr. ® Marque de commerce enregistrée aux États-Unis. Brevets en instance Copyright © 2006 Honeywell International Inc. Tous droits réservés PRO TH3110D / TH3210D Table des matières Votre nouveau thermostat Caractéristiques du thermostat ................ 2 Coup d'oeil rapide sur les commandes .... 3 Coup d'oeil rapide sur l'affichage .............. 4 Annexes Remplacement des piles ........................... 9 En cas de difficulté .................................. 10 Services à la clientèle .............................. 12 Accessoires ............................................. .12 Garantie limitée de cinq ans ................... 13 Fonctionnement du thermostat Sélecteur du système (chauffage/refroidissement)........................ 5 Sélecteur du ventilateur (Auto/On)............ 6 Boutons de réglage de la température ..... 7 Protection du compresseur ....................... 8 1 Mode d'emploi À propos de votre nouveau thermostat Votre nouveau thermostat Honeywell a été conçu pour vous procurer de nombreuses années de service fiable et assurer la régulation de la température ambiante avec facilité, par l'entremise de simples boutons-poussoir. Caractéristiques · Grand affichage rétroéclairé, facile à lire, même dans l'obscurité. · Affiche simultanément la température ambiante et le point de consigne. · Protection intégrée du compresseur. 2 PRO TH3110D / TH3210D Coup your new thermostat Aboutd'oeil rapide sur les commandes Écran à affichage numérique Réglage de la température (voir page 7) Sélecteur du système (voir page 5) · Cool : Commande le système de refroidissement. · Off : Tous les systèmes sont à l'arrêt. · Heat : Commande le système de chauffage. · Em Heat : Commande le fonctionnement du système de Sélecteur du ventilateur (voir page 6) chauffage d'urgence et du système On : Le ventilateur fonctionne sans inte ...