HP BladeSystem Management Pack for Microsoft® System Center Essentials 2007 User Guide Part Number 465398-001 November 2007 (First Edition) © Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft Corporation. Contents Overview..................................................................................................................................... 6 About this guide........................................................................................................................................ 6 Introduction .............................................................................................................................................. 6 Features ................................................................................................................................................... 6 Benefits .................................................................................................................................................... 7 Product architecture ................................................................................................................................... 7 Installation overview .................................................................................................................................. 9 Preinstallation checklist............................................................................................................................... 9 Installing the HP BladeSystem Management Pack 1.0 for System Center Essentials 2007 (x86 or x64 editions) ... 10 After the installation of the HP BladeSystem Management Pack 1.0 for System Center Essentials 2007............... 13 Uninstalling the HP BladeSystem Management Pack 1.0 for System Center Essentials 2007.............................. 15 Repairing the installation of the HP BladeSystem Management Pack 1.0 for System Center Essentials 2007........ 15 Using the HP BladeSystem Management Pack for Microsoft® System Center Essentials 2007............................ 16 Classes .................................................................................................................................................. 16 Views .................................................................................................................................................... 20 Active Alerts view .......................................................................................................................... 20 Device Bay State view.................................................................................................................... 23 Enclosure Diagram view ................................................................................................................. 23 Enclosure State view ...................................................................................................................... 26 Health Collection State view ........................................................................................................... 29 Monitor Service State view ............................................................................................................. 30 Task Status view ............................................................................................................................ 31 Discovering HP BladeSystem enclosures ..................................................................................................... 31 Discovery rules.............................................................................................................................. 31 State monitors ............................................................................................................................... 32 Propogation monitors ..................................................................................................................... 32 Alert processing rules ..................................................................................................................... 33 Tasks ..................................................................................................................................................... 34 HP Onboard Administrator task....................................................................................................... 34 HP Integrated Lights-Out task........................................................................................................... 35 HP BladeSystem Enclosure Monitor Manager .............................................................................................. 36 Refreshing the data........................................................................................................................ 37 Adding managed enclosures........................................................................................................... 38 Removing managed enclosures ....................................................................................................... 38 Updating enclosure login................................................................................................................ 38 Launching the Onboard Administrator web ....................................................................................... 38 Launching the HP BladeSystem Management Pack help ...................................................................... 38 HP BladeSystem Enclosure Monitor Service................................................................................................. 39 Installation ................................................................................................................................... 9 Using the software ...................................................................................................................... 16 NT Event lists for HP BladeSystem Enclosure Monitor Service ........................................................... 40 Service NT events.................................................................................................................................... 40 Enclosure Monitor Service Started.................................................................................................... 40 Enclosure Monitor Service Stopped .................................................................................................. 40 Contents 3 SNMP Trap Service is not available ................................................................................................. 40 Monitor NT events ................................................................................................................................... 40 Connecting to Enclosure ................................................................................................................. 41 Connected to Enclosure .................................................................................................................. 41 Disconnected from Enclosure........................................................................................................... 41 Connection to Enclosure Failed........................................................................................................ 41 Data Collection Started .................................................................................................................. 42 Data Collection Completed ............................................................................................................. 42 SOAP Event Collection Started ........................................................................................................ 43 SOAP Event Collection Stopped ...................................................................................................... 43 Data Collection Failed.................................................................................................................... 43 SNMP Trap Collection Started......................................................................................................... 43 Health Check Started ..................................................................................................................... 44 Health Check Stopped ................................................................................................................... 44 Health Check restarted a monitoring ................................................................................................ 44 Health Check failed to stop a monitoring .......................................................................................... 44 Monitor Service failed to load the configuration data ......................................................................... 44 Monitor Service failed to respond .................................................................................................... 45 SOAP NT events ..................................................................................................................................... 45 SOAP event informational............................................................................................................... 45 SNMP trap NT events .............................................................................................................................. 45 Rack name changed ...................................................................................................................... 45 Rack enclosure name changed ........................................................................................................ 46 Enclosure removed ........................................................................................................................ 46 Enclosure inserted.......................................................................................................................... 47 Rack enclosure overheated ............................................................................................................. 48 Rack enclosure overheating ............................................................................................................ 48 Rack enclosure temperature normal.................................................................................................. 49 Rack enclosure fan failed................................................................................................................ 49 Rack enclosure fan degraded.......................................................................................................... 50 Rack enclosure fan OK................................................................................................................... 51 Rack enclosure fan removed ........................................................................................................... 51 Rack enclosure fan inserted............................................................................................................. 52 Rack power supply failed ............................................................................................................... 52 Rack power supply degraded ......................................................................................................... 53 Rack power supply OK .................................................................................................................. 54 Rack power supply removed ........................................................................................................... 54 Rack power supply inserted ............................................................................................................ 55 Rack power subsystem not redundant ............................................................................................... 55 Rack power subsystem input voltage problem.................................................................................... 56 Rack power subsystem overload ...................................................................................................... 57 Server blade removed ................................................ ...