User manual HTC TOUCH CRUISE - READ ME FIRST

Personalize Your Device A. Change the Today screen background Tap Start > Settings > Personal tab > Today. Make a Voice or Video Call 1 Press the TALK button or Start > Phone. 2 On the Phone keypad, touch the keys with your finger or tap the keys using the stylus to enter the phone number. Get E-mail On Your Device Set up your device so you can send and receive e-mail messages using your favorite e-mail service. Read Me First This Read Me First will help you get started with using your Windows Mobile® 6 powered device. We recommend that you have this guide handy when you start using your device. For a more complete reference, consult the User Manual that came with the device. B. Set the date and time Tap Start > Settings > System tab > Clock & Alarms > Time tab. 3 The Smart Dialing panel will display the matching phone numbers in Call History as C. Manage power settings Tap Start > Settings > System tab > Power > Advanced tab. well as the matching contacts found on your device and SIM card. Select the number or contact you want to call then press TALK. To make a video call, touch/tap instead of pressing TALK. For hands-free phone conversation, connect the USB stereo headset or a Bluetooth® headset (not included) to your device. Smart Dialing Panel To learn how to connect a Bluetooth headset, refer to the User Manual. Select this check box. 1 Tap Start > Messaging > New E-mail Account. 2 3 Enter your e-mail address and tap Next. Auto Setup downloads e-mail server settings automatically to your device. Tap Next. Note If Auto Setup is unsuccessful, you need to manually enter the settings in the succeeding screens. A B C TALK Button Secure Your Device A. To enable the SIM PIN Enabling the SIM PIN requires you to enter a PIN code first before you can use the phone features of your device. You can enable the SIM PIN by tapping Start > Settings > Personal tab > Phone and selecting Require PIN when phone is used. Take a Photo Use the Camera of your device to capture those precious moments. 1 Tap to change capture modes. What's in the Box These are the items that you should find inside the box. 5 9 13 1 B. To enable the device password Enabling the device password requires you to enter a password to unlock the device after it has been left idle for a set period of time. 1. Tap Start > Settings > Personal tab > Lock. 2. Select the Prompt if device unused for check box and enter the time you want. 3. Select the Password type. 4. Enter and confirm the password, then tap OK. Press the CAMERA button. The screen orientation automatically switches to landscape mode when you use the camera. 1. Touch Phone 2. Battery 3. Screen Protector 4. microSDTM Card 6 10 5. AC Adapter 6. USB Sync Cable 7. USB Stereo Headset 8. Read Me First and User Manual 2 Press ENTER to take the shot. 4 Enter Your Name and Account display name. Tap Next. 5 Enter your User name and Password for the e-mail account. Tap Next. 6 C. To enable the key lock Enabling the key lock helps prevent accidental touch screen taps or button presses when the device is in your pocket or bag. Lock the keys by tapping the Launcher tab ( To unlock, tap Unlock. ) on HTC Home and then tapping . Tap to configure capture and camera settings. Tap to choose the resolution and other settings. Choose how frequent you want your device to automatically send and receive e-mail. Tap Finish. 2 7 11 9. Pouch 10. Getting Started Disc and Applications Disc 11. Car Holder 12. Car Charger 13. Extra Stylus 3 Screen Protector The photo will be saved to the My Pictures folder, unless you choose to delete it by tapping after taking the photo. Tap if you want to send the photo via MMS or e-mail. Refer to the User Manual for more information about using the Camera. You can also synchronize your device with your company's Exchange Server so you can access your company e-mail. Refer to the User Manual to learn how to get your company e-mails on your device. 8 User 12 Manua l 4 Read Me First www.htc.com 90H00xxx-xxM Rev.A Before Using Your Device A. Remove the back cover Ensure that the device is turned off and slide the battery cover off. Quick Setup Wizard 3 Insert the USIM/SIM card with its gold contacts facing down and its cut-off corner facing the battery compartment. Synchronize Your Device and Computer Synchronize your device with your computer to keep information such as Outlook e-mails, contacts, tasks, and appointments up-to-date on your device. D. Replace the back cover Slide the back cover into place. When you power on your device for the first time, a Quick Start Wizard will guide you through touch screen calibration, provide a quick tutorial on stylus operation and pop-up menus, and allow you to set the date, time, and a device password. Follow the on-screen instructions to complete the wizard. Set up synchronization software on your computer Depending on the operating system of your computer, you will need either Microsoft ActiveSync® 4.5 (or later) or Windows Mobile® Device Center to synchronize your device with your computer. Cut corner of SIM card E. Charge the battery The battery is partially charged out of the box. To charge the battery inside your device, connect the AC adapter plug to an electrical outlet and connect the USB end to the Sync connector at the bottom of your device. The battery is fully charged after about 3 hours of charging. Set up ActiveSync on Windows® XP 1 Install ActiveSync 4.5 on your computer from the Getting Started Disc. SIM card lock Set up Windows Mobile Device Center on Windows Vista® B. Install the SIM Card 4 1 Push the SIM card holder to the right to unlock it. Push the SIM card holder down until it snaps into place to lock it. When you insert the battery, the SIM card lock secures the SIM card in place. C. Install the battery Install the battery by aligning its exposed copper contacts with the battery connectors inside the battery compartment. Insert the contact's side of the battery first, then gently push the battery into place. F. Power on/off the device Press and hold the POWER button for about 3 seconds to power on/off your device. When powering off, a confirmation message will appear. Tap Yes to power off the device. 1 2 Connect your device to your computer. The Synchronization Setup Wizard automatically starts and guides you to create a synchronization partnership. Click Next to proceed. To synchronize your device with your computer, clear the Synchronize directly with a server running Microsoft Exchange check box and click Next. 2 Flip the SIM card holder up. Battery connectors Connect your device to your computer. In Windows Mobile Device Center, click Set up your device. The Touch Phone Earpiece POWER Second Camera VOICE COMMAND Volume Control Touch Screen microSDTM Card Slot HTC HomeTM HTC HomeTM is a Today screen plug-in that gives you up-to-date local information at a glance, such as time, date, and weather information, and shows new messages and missed calls. It also has a customizable launcher where you can add your favorite applications for one-touch access and a Profile selector where you can quickly change the profile or ring tone of your device. TouchFLOTM TouchFLOTM gives you better touch panel experience on your device. Using TouchFLO, you can easily scroll and pan the screen by sliding your finger on the touch panel. TouchFLO also has the Touch Cube where you can add your favorite contacts, access media, launch programs, and more. Finger scrolling While on a Web page, document, or list (such as contacts list, file list, etc.), slide your finger upward to scroll down or slide your finger downward to scroll up. To scroll to the right, slide your finger to the left. To scroll to the left, slide your finger to the right. Finger panning Touch and hold on the touch screen and then drag your finger around the screen. Touch Cube To open the Touch Cube, slide your finger upward, starting from the bottom of the touch screen where it shows a logo image. To close the Touch Cube, slide your finger downward. Touch Cube is a three-dimensional, cubic user interface. To flip the interface from one side to another, slide your finger left or right on the touch screen. Go Online and Surf the Web Go online by turning on Wi-Fi® on your device. Note If there is no Wi-Fi hotspot in your area, you can still connect to the Internet by using the 3G / GPRS or dial-up service of your wireless service provider. Refer to the User Manual to learn how to connect using 3G / GPRS or dial up. 3 2 Select the information you want to synchronize and click Next. NAVIGATION WHEEL / ENTER 4 Select the information types that you want to synchronize, then click Next. Choose whether to allow wireless connections while your device is connected to the computer. Click Finish. 1 Note Tap Start > Programs > Comm Manager and tap Wi-Fi. 2 Select the wireless network you want to connect to and tap OK. 3 Select The Internet and tap Connect. 5 TALK GPS END CAMERA INTERNET EXPLORER Stylus Microphone If you are connecting to a secured wireless network, you may need to enter a Key for that network connection before you can connect to it. 3 When connected, launch Internet Explorer® Mobile (tap Start > Internet Explorer) to surf the Web. Opening the Touch Cube 6 Type a name for your device and click Set Up.