THANK YOU FOR SELECTING A HUSKY FLOOR LINER FROM WINFIELD CONSUMER PRODUCTS CARE AND USE INSTRUCTIONS Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this "relaxing" may take longer; moving the liner inside will speed up the process. Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick. INSTALLATION INSTRUCTIONS FOR YOUR JEEP GRAND CHEROKEE CARGO LINER TO ACCESS THE FACTORY CARGO TIE-DOWN ATTACHMENT POINTS WITH YOUR LINER IN PLACE, TRIM AWAY THE FOUR (4) AREAS LOCATED ABOVE THE ATTACHMENT POINTS. (SHOWN HERE CIRCLED/DARKENED). TRIMMING IS EASILY DONE USING A UTILITY KNIFE OR SIMILAR CUTTING TOOL. USE THE MOLDED IN TRIM GROOVE AS A TRIMMING GUIDE. 2061.doc 10/26/2004 ...