THANK YOU FOR SELECTING A HUSKY FLOOR LINER FROM WINFIELD CONSUMER PRODUCTS CARE AND USE INSTRUCTIONS Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this "relaxing" may take longer; moving the liner inside will speed up the process. Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick. INSTALLATION INSTRUCTIONS FOR YOUR BLAZER/BRAVADA/ENVOY/JIMMY CARGO LINER TO ACCESS THE FACTORY CARGO TIE-DOWN HOOKS WITH YOUR LINER IN PLACE, MAKE A IN SLIT THE FOUR RAISED AREAS ON YOUR LINER (SHOWN HERE DARKENED). THEN, PULL THE HOOKS UP THROUGH THE SLIT IN THE LINER ENVOY OWNERS AND OWNERS WHOSE VEHICLE IS EQUIPPED WITH THE "ON STAR®" OPTION WILL NEED TO TRIM THEIR LINER AS SHOWN ABOVE, REMOVING THE OUTER RIGHT PORTION. TRIM ALONG THE GROOVE IN THE RAISED RIDGE AS SHOWN. A UTILITY KNIFE OR SCISSORS WORK WELL. 2231.DOC Rev: 0 01/31/01 ...