THANK YOU FOR SELECTING A HUSKY FLOOR LINER FROM WINFIELD CONSUMER PRODUCTS CARE AND USE INSTRUCTIONS Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this "relaxing" may take longer; moving the liner inside will speed up the process. Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409 ® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick. INSTALLATION INSTRUCTIONS FOR YOUR FORD EXPEDITION/LINCOLN NAVIGATOR CARGO LINER IF YOU HAVE A 1997-2002 MODEL YEAR VEHICLE, THIS PART WILL NOT FIT. YOU NEED OUR MODEL #2345 FOR VEHICLES WITHOUT REAR AIR OR MODEL #2346 FOR VEHICLES EQUIPPED WITH REAR AIR PART NUMBER MOLDED HERE THIS PART IS DESIGNED TO FIT BEHIND THE THIRD SEAT OF 2003 AND NEWER FORD EXPEDITIONS AND LINCOLN NAVIGATORS. HUSKY CARGO LINER MODEL #2356 IS AVAILABLE AND WILL FIT TO THE BACK OF THE SECOND SEATS OF THESE VEHICLES. 2355.doc Rev: 0 06/05/02 ...