THANK YOU FOR SELECTING A HUSKY FLOOR LINER FROM WINFIELD CONSUMER PRODUCTS CARE AND USE INSTRUCTIONS Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor liner. However, do not remove the factory-installed carpeting. Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick. INSTALLATION INSTRUCTIONS FOR YOUR SUBARU OUTBACK/LEGACY LEFT OR DRIVER'S SIDE RIGHT OR PASSENGER'S SIDE TO EASE ACCESS TO THE FUEL DOOR RELEASE LEVER WITH YOUR LINER IN PLACE, SIMPLY TRIM AWAY THE MATERIAL FROM THE LOWERED AREA ON YOUR DRIVER'S SIDE LINER (AREA SHOWN DARKENED ABOVE). A UTILITY KNIFE WORKS WELL FOR TRIMMING. YOU CAN AVOID TRIMMING BY JUST LIFTING THE LINER UP TO ACCESS THE RELEASE LEVER. 3401.doc 12/22/2004 ...