IISonic LCD Monitor Series User's Manual IIMJ7 Notice All Information in this manual may change from time to time without prior notice. To ensure safety operation of this product, please read the following menu carefully before using this product. Safety Information Do not place anything wet on the monitor or the power cord. Be sure to turn the monitor off before plugging the power cord into the socket. Be sure to check the power cord and the other cords are securely and rightly connected. Do not attempt to open the monitor. You may be hurt by electric shock. For service, call your place of purchase. Precaution Do not expose the monitor to direct sunlight or heat. Do not spill liquid on the monitor. Do not use your monitor when magnets or electronic products are operating nearby. Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen. Wipe it with clean, soft clothes applied with mild solution. Do not place anything on your monitor. Bad ventilation may elevate temperature in the monitor. Do not use your fingers to touch the LCD Screen directly. Fingerprint that contains oil and may be difficult to clean. Package Contents Our LCD monitor contains these following items. Make sure you get items listed below, otherwise contact to your dealer or store. 1. 17"TFT LCD Monitor 2. 4. Power Cord (1800mm) Audio Cable 3. VGA Cable 5. User's Manual 2 Hardware Installation Be carefully to your LCD monitor, it's very exquisite but easy to broken. Turn off LCD's and PC's power before you set it up. Follow our installation step by step. Input [1] [2] [3] 1 2 3 DC port This is for connecting the power cable. PC In : This can be connected with the D-Sub 15 pin signal Cable. Audio In This can be connected to the PC audio-out connector of sound resource. Control Buttons There 4 keys for user to set up the monitor, including, "OSD menu ", "Increase<+>","Decrease<->", "Power". The following descriptions are the introduction of these Keys. Power: Turn the LCD power on and off. When the power is on, the light is showing green, stand by will be orange. Increase < + >: Increase the option value in the OSD menu. OSD Menu: Press the button to OSD menu, and menu right adjustment. Decrease < - >: Decrease the option value in the OSD menu. 3 OSD (On-Screen Display) Menu Mode Press the OSD button to access menu, and press Increase / Decrease button for adjustment. MISCELLANEOUS 4 Troubleshooting Make sure that your monitor is properly installed if you have encountered any trouble using this product. There is no picture on the screen. Check: 1.Power saving mode. Press any key and move the mouse to deactivate the mode. 2.Signal cable connector pins. If there are bent or missing pins, consult your place of purchase. Characters look too dark or too light Check: Using OSD Menu to adjust the Brightness. When your monitor shall be adjusted? Check: If the resolution of frequency is being changed. . The text appears on the screen are unclear. Check: Make sure the resolution or refresh rate match with the Display Mode. Display Mode We offer you 10 available modes compatible with Windows. If any interference occurs on your screen while you modulating your PC or OSD. It is normal. To have best quality present on the PC, remember to upgrade your video card driver. We strongly recommend you to choose a mode listed in the table. The other modes may not be supported that are not list on the table above You may use the power management on your computer. It's good for life extention of the product. Display Mode Resolution 640X350 640X480 640X480 720X400 800X600 800X600 1024X768 1024X768 1280X1024 1280X1024 Horizontal Frequency (KHz) 31.475 31.469 37.500 31.469 37.879 46.875 48.363 60.023 63.981 79.976 Vertical Frequency (Hz) 70.100 59.940 75.000 70.087 60.317 75.000 60.004 75.029 60.020 75.024 5 1610MJ7AGN01 V1.2