What would you like to do ? -------------------------- Help us find the most requested user's guides Upload your
user manual Search for a user manual Register Login and access your manuals Reset your password

	Browse all user guides
	The IIYAMA VISION MASTER PRO 451 product forum
	Upload your user manual
	Sign-up Log in
	Help us find the most requested user's guides
	Include the add-on to download manuals from your site, forum or blog
	Frequently Asked Questions
	Contact Diplodocs team
ALL GUIDES BY CATEGORY Domestic Appliance TV & Audio Car & Motorcycle Phone Computer Camera & Video Music Sport Gardening & Housekeeping Video Game & Software Jewelry & Watch Baby & Toys Hygiene & Health Other

HM903DT A902MT-v USER MANUAL ENGLISH DEUTSCH TABLE OF CONTENTS FOR YOUR SAFETY............................................................ SAFETY PRECAUTIONS............................................ CUSTOMER SERVICE................................................ CLEANING................................................................... BEFORE YOU OPERATE THE MONITOR.......................... FEATURES.................................................................. ACCESSORIES........................................................... FOR WINDOWS 95/98/ME/2000 USERS....................... LOCATION OF CONTROLS........................................ CONNECTING YOUR MONITOR.................................. OPERATING THE MONITOR................................................ ADJUSTMENT MENU CONTENTS.............................. 1 1 3 3 4 4 4 4 5 6 FRANCAIS NEDERLANDS SVENSKA ITALIANO 7 8 POWER MANAGEMENT FEATURE............................. 13 SELF DIAGNOSIS FUNCTION........................................ 13 TROUBLE SHOOTING........................................................ 14 APPENDIX............................................................................ 16 SPECIFICATIONS....................................................... 16 PRESET MODES......................................................... 17 CONNECTOR PIN ASSIGNMENT................................. 17 Thank you very much for choosing the iiyama Vision Master color monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. ENGLISH Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. ENGLISH Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy. What does labelling involve? This product meets the requirements for the TCO'99 scheme which provides for international and environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and magnetic fields, energy consumption and electrical and fire safety. The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability. Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Cadmium* * Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury* * Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. CFCs (freons) The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence. Lead* * Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed. * Bio-accumulative is defined as substances which accumulate within living organisms ** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative. ENGLISH FCC DECLARATION OF CONFORMITY Model Number: Trade Name: Responsible party: Address: Telephone number: HM903DT / A902MT-v iiyama Iiyama North America, Inc. 1560 Brookhollow Drive, Suite 208, Santa Ana, CA 92705 U.S.A. 714-437-5111 This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This equipment may not cause harmful interference, and (2) this equipment must accept any interference received, including interference that may cause undesired operation. ENGLISH This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If you determine the equipment does cause harmful interference to radio or television reception (this may be determined by monitoring the interference while turning the equipment off and on), you are encouraged to try to correct the interference by one of the following measures: n Reorient or relocate the receiving antenna. n Increase the separation between the equipment and receiver. n Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. n Consult the dealer or an experienced radio or TV technician for help. To meet the FCC requirements, the specified signal cables below should be used. Signal Cable MB30 (Enclosed): 242Z013-01 Signal Cable MB31 (Optional): 242Z017-01 CAUTION Changes or modifications not expressly approved by iiyama could void the users authority to operate the equipment under FCC compliance regulations. CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE STATEMENT This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulation of the Canadian department of communications. CE MARKING DECLARATION OF CONFORMITY This Color Data Monitor complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" and 73/23/EEC "Low Voltage Directive" as amended by Directive 93/68/EEC. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterized by their connection to the public low voltage power supply system. n We reserve the right to change specifications without notice. n All trademarks used in this user manual are the property of their respective owners. n As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MONITOR Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage. INSTALL THE MONITOR ON A FLAT, STABLE SURFACE The monitor may cause an injury if it falls or is dropped. DO NOT USE THE MONITOR NEAR WATER Do not use the monitor where water may be splashed or spilt on the monitor as it may cause fire or electric shock. OPERATE UNDER THE SPECIFIED POWER SUPPLY Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock. PROTECT THE CABLES Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock. ADVERSE WEATHER CONDITIONS It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock. CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, or dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury. FOR YOUR SAFETY 1 ENGLISH CAUTION MAINTAIN GOOD VENTILATION Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls. Do not remove the tilt stand when operating the monitor. Ventilation slots on the cabinet bottom will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage. ENGLISH DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cables are disconnected. If you do not disconnect them, it may cause fire or electric shock. It is recommended that two people are used when moving the monitor. UNPLUG THE MONITOR If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents. HOLD THE PLUG WHEN DISCONNECTING To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock. DO NOT TOUCH THE PLUG WITH WET HANDS Pulling or inserting the plug with wet hands may cause electric shock. DO NOT PUT FLOPPY DISKS NEAR THE MONITOR Magnetic data recordings such as on a floppy disk may disappear if they are placed on or near the monitor as the degauss circuit causes a strong momentary magnetic field. WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer. OTHERS ERGONOMIC RECOMMENDATIONS To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain. MAGNETIC FIELD INFLUENCE Place the monitor away from TV, speaker systems or any other source of strong magnetic fields. The monitor may be noisy or the screen's output may be distorted as a result of interference from other appliances. 2 FOR YOUR SAFETY OTHERS ATTENTION FOR USING THE OPQ FUNCTION (=Optimize Picture Quality) For HM903DT: Due to the nature of the Diamondtron M2-CRT, misconvergence, misalignment of the aperture grille, picture shaking or burn-in of phosphors may happen when displaying a high-white picture for a long time while the OPQ function is active. Turn OFF the OPQ function when displaying anything other than DVD or other moving pictures. OPTIMUM PICTURE FOR THE OPQ FUNCTION 1. Text mode n Word processor and spreadsheet n Text and a like 2. Picture mode n Still picture 3. Movie mode n Moving picture (DVD / TV) NOTE When you select the Picture or Movie mode within the OPQ function, and use a word processor or display text and a like then your eyes maybe subject to fatigue. This will be because the right side of characters will appear stretched, bright and slightly out of focus. This is normal because the mode you have selected is designed for still or moving pictures. To reduce fatigue use the Text mode or take a short break. CUSTOMER SERVICE NOTE n If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging. CLEANING WARNING n If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center. CAUTION n For safety reasons, turn off the power switch and unplug the monitor before you clean it. n The CRT screen is protected by an anti-reflection & anti-static coating. Do not scratch or rub the screen with a hard object, as this could damage the coating. n Never use any of the following strong solvents. These will damage the cabinet and the CRT. Thinner Benzine Abrasive cleaner CABINET CRT Spray-type cleaner Wax Acid or Alkaline solvent NOTE Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth. It is recommended that a soft clean cloth be used to remove smudges (such as fingerprints) from the CRT. FOR YOUR SAFETY 3 ENGLISH BEFORE YOU OPERATE THE MONITOR The stand functions as a hub when connected to a USB compliant computer and USB peripherals. However, with older operating systems and/or BIOS settings in your computer, the USB hub may not operate. In this case, please contact your computer dealer first for advice. FEATURES K HM903DT: High Brightness K Crisp, Clear Display for Windows® or Macintosh ENGLISH K Supports Resolutions up to 1920×1440 K Supports Refresh Rate up to 102Hz at 1600×1200 K Windows® 95/98/Me/2000 Plug & Play Compliant K Supports sRGB International Standard K Power Management (ENERGY STAR® and VESA DPMS Compliant) K Space Saving, Compact Case Design K Ergonomic Design: TCO '99 and MPR 3 Approved K USB Hub Function & Stereo Speakers ACCESSORIES The following accessories should be included in the Vision Master packaging. Please ensure that all of them are enclosed. n Power Cable* n Signal Cable MB30 (For D-Sub connection) n USB Cable SU41 n Audio Cable AD21 (RCA to mini jack) n User Manual CAUTION * TO USERS IN 120V AREA The rating of the Power Cable enclosed in 120V area is 10A / 125V. If you are using a power supply higher than this rating, then a power cable with a rating of 10A / 250V must be used. FOR WINDOWS 95/98/ME/2000 USERS Windows 95/98/Me/2000 Monitor Information File for iiyama monitors may be obtained via the Internet, using the address: http://www.iiyama.com (U.S.A.) http://www.iiyama.co.uk (U.K.) NOTE n For additional information on how to download the driver for your monitor, please access one of the internet sites noted above. 4 BEFORE YOU OPERATE THE MONITOR LOCATION OF CONTROLS Front A Speakers The volume control is performed with the / On Screen Display. Press the Buttons and then the Menu Button continuously when the Menu is not displayed. MENU VIDEO 1/2 C Input Select Button (VIDEO 1/2) Select either VIDEO IN 1 or 2 for the signal input when both of the signal inputs are connected to a signal source. Switch VIDEO IN 1 and 2 whenever pressing Input Select Button for 3-4 seconds. NOTE When only one of the two signal inputs is connected to the signal source, the one connected is automatically selected. Input Select Button is not available if there is no signal input from the selected connector or during the power management mode. D Four Directional Button / / / Back E Menu Button (MENU) F D-sub mini 15pin Connector (VIDEO IN 1) G D-sub mini 15pin Connector (VIDEO IN 2) H AC Connector (AC IN) POW ER VIDEO IN 1 IN 2 VIDEO O IN AC IN AUDI UP I Audio Connector (AUDIO IN) J USB-UP Connect with a USB compliant computer by the USB Cable attached to the monitor. K USB-DOWN Connect any cables from USB compliant peripherals such as mouse, keyboard, etc. L Headphone Connector M Power Switch (POWER) BEFORE YOU OPERATE THE MONITOR 5 ENGLISH B Power Indicator CONNECTING YOUR MONITOR A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable. (See page 17 for CONNECTOR PIN ASSIGNMENT.) C Connect the monitor to the audio equipment with the Audio Cable when using the audio features. D Connect the monitor to the USB compliant computer with the USB Cable when using the USB hub features. ENGLISH E Connect the Power Cable to the monitor first and then to the power supply. NOTE n The signal cables used for the connection vary by the type of computers you use. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office. n For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor. n Make sure you tighten the finger screws at each end of the signal cable. [Example of Connection] POWE R VIDEO IN 1 IN 2 VIDEO IN AC IN AUDIO UP Power Cable (Accessory) Signal Cable MB30 (Accessory) Mouse Keyboard Printer Audio Cable AD21 (Accessoy) USB Cable SU41 (Accessory) Computer 6 BEFORE YOU OPERATE THE MONITOR OPERATING THE MONITOR The iiyama Vision Master has been preset at the factory with the signal timings listed on page 17 in PRESET MODES to create the best picture. If an incorrect picture appears during the operation, adjust the image by following the procedure below to get the desired picture. After selecting an item in the Main Menu, the adjustments and settings are made in the Sub-Menu. ( Main Menu appears on the screen when you press the Menu Button. B For example, to adjust the horizontal screen size, select (Screen Control) on the Main Menu by using the / Buttons. The Sub-Menu appears when you press the Menu Button. Menu Adjustment icon RB FUNC IN 1 Signal input connector presently selected Adjustment menu presently selected Screen Control (H-Size) on the Sub-Menu by using the / Buttons. C Select An adjustment scale will turn white when you press the Menu Button. Use the / Buttons to adjust the horizontal screen size. The vertical screen size adjustment can be also made on this screen by using the / Buttons. See ADJUSTMENT MENU CONTENTS on next pages for further information. Screen Control Adjustment icon Adjustment menu presently selected The line shows the progress of the adjustment being made. H-Size | | | | | | | | | | | | | | | | | | | | | | | | | · · · · · · · · · · · · · · · · · · · · · · · · · 50 V-Size | | | | | | | | | | | | | | | | | | | | | | | | | · · · · · · · · · · · · · · · · · · · · · · · · · 50 NOTE n The On Screen Display disappears in optional setting seconds after you stop pressing the buttons while performing an adjustment. (See page 11 for OSD Off Timer.) n Adjustments for Size, Position, Pin-Cushion and Trapezoid are saved for each signal timing. Except for these adjustments, all other adjustments such as Color, Parallelogram, Convergence, Moire, and Landing have only one setting which applies to all signal timings. OPERATING THE MONITOR 7 ENGLISH ADJUSTMENT MENU CONTENTS Direct You can skip the Menu pages and display an adjustment scale directly by using the following button operations. l Volume Control: Press the the Menu is l Contrast/Brightness: Press the l OPQ: Press the NOTE / Buttons and then the Menu Button continuously when not displayed. / Buttons when the Menu is not displayed. / Buttons when the Menu is not displayed. ENGLISH n SWITCHING CONTRAST/BRIGHTNESS AND VOLUME CONTROL To switch between Contrast/Brightness and Volume Control, press the Menu Button within 2 seconds after pressing the Four Directional Button during the direct adjustments above. n The On Screen Display disappears approx. 3 seconds after you stop pressing the buttons while performing the direct adjustment, irrespective of OSD Off Timer setting. (See page 11 for OSD Off Timer.) Sub-Menu Volume Control Problem / Option Button to Press Main Menu Direct Too soft Too loud NOTE Only available on Direct adjustment. Contrast Direct Direct Too dull Too intense Too dark Too bright Reddish white Bluish white Color Control Brightness COLOR