User manual INFINITY BETA C250

INFINITY BETA SPEAKER SYSTEMS TM Owner's Guide Beta 10 Beta 20 Beta 40 Beta 50 Beta C250 Beta C360 INFINITY BETA SERIES The Infinity BetaTM Series of loudspeakers continues Infinity's longstanding commitment to accurate sound reproduction. Our patented Ceramic Metal Matrix Diaphragm (CMMDTM) drivers, precision dividing networks, and rigid, well-braced enclosures, along with our newly developed, patentpending Constant Acoustical ImpedanceTM (CAITM) waveguide, combine to deliver uncompromised performance in any stereo or multichannel home theater system. In addition, Beta Series speakers are magnetically shielded for safe placement adjacent to a television. Home Theater For front-channel use, place one speaker on the left and another on the right, along either side of the television monitor. Since the speakers are magnetically shielded, you can place them near the TV without worrying about the field distorting the TV picture. For surround-channel use, place speakers on bookshelves or stands alongside the listening position. Final placement depends on room acoustics, availability of space and your listening preference (Figures 2 and 3). In 6- or 7-channel configurations, place the rear channel(s) behind the listening position, as shown in Figures 2 and 3. NOTE: An Infinity powered subwoofer will add impact and realism to both music and film soundtracks. Contact your Infinity dealer for recommendations on subwoofer models for your application. Infinity Subwoofer (optional) UNPACKING THE SPEAKERS If you suspect damage from transit, report it immediately to your dealer. Keep the shipping carton and packing materials for future use. PLACEMENT Stereo Before deciding where to place your Beta speakers, survey your room and think about placement, keeping the following points in mind, using Figure 1 as a guide: · For best results, place the speakers 6'­ 8' (1.5m­2.5m) apart. · Position each speaker so that the tweeter is approximately at ear level. · Generally, bass output will increase as the speaker is moved closer to a wall or corner. · Refer to "Home Theater" below if you also plan to use the speakers for home theater reproduction. Left Front Channel Center Channel Right Front Channel Couch Left Surround Channel Left Rear Channel Center Rear Channel Right Rear Channel Right Surround Channel Left Channel Right Channel Figure 2.This overhead view shows a typical home theater plan. Left/right rear channels are for a 7-channel system. Center rear channel is for a 6-channel system. (optional) Listening Position Figure 1. Experiment with speaker placement to obtain the best bass level and stereo imaging in your room. Right Rear Channel Left Rear Channel Center Rear Channel Figure 3.This figure shows an alternate layout, which may be more suitable for some rooms. Left/right rear channels are for a 7-channel system. Center rear channel is for a 6-channel system. 2 BETA SPEAKER SYSTEMS INSTALLING FEET Beta 40 and Beta 50 These models feature four rubber feet, which enables them to be placed on a smooth-surfaced floor, such as tile or hardwood. Four metal spikes are supplied for use when the speaker is to be placed on a carpeted surface, to decouple the speaker from the floor and prevent unwanted damping.To insert the spikes, gently lay the speaker on its side (not its front or back) on a soft, nonabrasive surface. Each spike screws into the threaded insert in the center of each rubber foot. Make sure all four spikes are screwed in completely for stability. NEVER drag the speaker to move it, as this will damage the spikes, the feet and/or the wood cabinet itself. Always lift the speaker and carry it to its new location. CAUTION: Floorstanding (tower) loudspeakers have a high center of gravity and may become unstable and tip over during earthquakes, or if rocked, tipped or improperly positioned. If this is a concern, these speakers should be anchored to the wall behind them, using the same procedures and hardware customary for anchoring bookcases and wall units.The customer is responsible for proper installation and proper selection of hardware. BETA SPEAKER SYSTEMS 3 WIRING THE SYSTEM IMPORTANT: Make sure all equipment is turned off before making any connections. For speaker connections, use a high-quality speaker wire with polarity coding.The side of the wire with a ridge or other coding is usually considered positive polarity (i.e., +). NOTE: If desired, consult your local Infinity dealer about speaker wire and connection options. The speakers have coded terminals that accept a variety of wire connectors.The most common connection is shown in Figure 4. To ensure proper polarity, connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on each speaker, as shown in Figure 5. Connect the ­ (black) terminals in a similar way. See the owner's guides that were included with your amplifier, receiver and television to confirm connection procedures. IMPORTANT: Do not reverse polarities (i.e., + to ­ or ­ to +) when making connections. Doing so will cause poor imaging and diminished bass response. Beta 40 and Beta 50 Figure 6.This example shows how to connect bare wires to the terminals. Banana plugs may also be inserted directly into the rear of the connector. Figure 4.This figure shows how to connect bare wires to the terminals. Beta 10, Beta 20, Beta C250 and Beta C360 Figure 7. Wiring diagram shows polarity connections for one channel of a stereo or home theater system. Figure 5. Wiring diagram shows polarity connections for one channel of a stereo or home theater system. 4 BETA SPEAKER SYSTEMS BI-WIRING The outer connection panel and internal dividing network of the Beta 40 and Beta 50 are designed so that separate sets of speaker cables can be attached to the low-frequency transducer and midrange/highfrequency transducer portions of this dividing network.This is called bi-wiring. Bi-wiring can provide several sonic advantages and considerably more flexibility in power amplifier selection. FINAL ADJUSTMENTS Check the speakers for playback, first by setting the system volume control to a minimum level, and then by applying power to your audio system. Play a favorite music or video segment and increase the system volume control to a comfortable level. NOTE: You should hear balanced audio reproduction across the entire frequency spectrum. If not, check all wiring connections or consult the authorized Infinity dealer from whom you purchased the system for more help. The amount of bass you hear and the stereo-image quality will be affected by a number of different factors, including the room's size and shape, the construction materials used to build the room, the listener's position relative to the speakers, and the position of the speakers in the room. Listen to a variety of music selections and note the bass level. If there is too much bass, move the speakers away from nearby walls. Conversely, if you place the speakers closer to the walls, there will be more bass output. Nearby reflecting surfaces can adversely affect stereo-imaging quality. If this happens, try angling the speakers slightly inward toward the listening position until the optimum effect is achieved. CARE OF YOUR SPEAKER SYSTEM FIGURE 8. Each Beta Series enclosure has a wood-grain-vinyl finish that does not require any routine maintenance. When needed, use a soft cloth to remove any fingerprints or dust from the enclosure or grille. NOTE: Do not use any cleaning products or polishes on the cabinet or grille. Single-Stereo Amplifier FIGURE 9. Dual-Stereo Amplifier FIGURE 10. BETA SPEAKER SYSTEMS 5 SPECIFICATIONS Beta 10 Frequency Ranges: Recommended Amplifier Power Range: Sensitivity: (2.83V @ 1 meter) 60Hz ­ 20kHz (±3dB) 55Hz ­ 40kHz (­ 6dB) Beta 20 58Hz ­ 20kHz (±3dB) 52Hz ­ 40kHz (­ 6dB) Beta 40 45Hz ­ 20kHz (±3dB) 40Hz ­ 40kHz (­ 6dB) 10 ­ 125 Watts 88dB 10 ­ 150 Watts 90dB 10 ­ 200 Watts 91dB Nominal Impedance: Crossover Frequency: Low-Frequency Driver(s): Mid-Frequency Driver: High-Frequency Driver: Dimensions (H x W x D): (with grille) 8 3.4kHz; 12dB/octave 5" (130mm) CMMD, magnetically shielded NA 8 2.4kHz; 12dB/octave 6-1/2" (165mm) CMMD, magnetically shielded NA 8 600Hz, 18dB/octave; 3.2kHz, 12dB/octave Dual 6-1/2" (165mm) CMMD, magnetically shielded 5" (130mm) CMMD, magnetically shielded 1" (25mm) CMMD, magnetically shielded 37" x 9-13/16" x 13-1/8" (950mm x 250mm x 333mm) 50.2 lb (22.8kg) 1" (25mm) CMMD, magnetically shielded 11-13/16" x 7-1/2" x 11-7/16" (300mm x 190mm x 290mm) 14 lb (6.4kg) 1" (25mm) CMMD, magnetically shielded 13-3/4" x 8-7/8" x 13" (350mm x 225mm x 330mm) 20.7 lb (9.4kg) Weight: Beta 50 Frequency Ranges: Recommended Amplifier Power Range: Sensitivity: (2.83V @ 1 meter) 35Hz ­ 20kHz (±3dB) 30Hz ­ 40kHz (­ 6dB) Beta C250 55Hz ­ 20kHz (±3dB) 50Hz ­ 40kHz (­ 6dB) Beta C360 45Hz ­ 20kHz (±3dB) 40Hz ­ 40kHz (­ 6dB) 10 ­ 250 Watts 91dB 10 ­ 150 Watts 90dB 10 ­ 200 Watts 91dB Nominal Impedance: Crossover Frequency: Low-Frequency Driver(s): Mid-Frequency Driver: High-Frequency Driver: Dimensions (H x W x D): (with grille) 8 600Hz, 18dB/octave; 3.3kHz, 12dB/octave Dual 8" (200mm) CMMD, magnetically shielded 5" (130mm) CMMD, magnetically shielded 1" (25mm) CMMD, magnetically shielded 41-5/16" x 10-7/16" x 14-11/16" (1050mm x 265mm x 372mm) 62.5 lb (28.4kg) 8 2.4kHz; 12dB/octave Dual 5" (130mm) CMMD, magnetically shielded NA 8 500Hz, 3.2kHz; 12dB/octave Dual 6-1/2" (165mm) CMMD, magnetically shielded 4" (100mm) CMMD, magnetically shielded 1" (25mm) CMMD, magnetically shielded 8-1/2" x 25-5/8" x 11-3/4" (215mm x 650mm x 298mm) 34.5 lb (15.7kg) 1" (25mm) CMMD, magnetically shielded 6-11/16" x 17" x 8-3/8" (170mm x 430mm x 212mm) 16 lb (7.3kg) Weight: Infinity continually strives to update and improve existing products, as well as create new ones.The specifications and construction details in this and related Infinity publications are therefore subject to change without notice. 6 BETA SPEAKER SYSTEMS NOTES Declaration of Conformity We, Harman Consumer International 2, route de Tours 72500 Chateau-du-Loir France declare in own responsibility that the products described in this owner's manual are in compliance with technical standards: EN 61000-6-3:2001 EN 61000-6-1:2001 Robin Marshall Harman Consumer International Chateau-du-Loir, France 7/04 BETA SPEAKER SYSTEMS 7 © 2004 Harman International Industries, Incorporated Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA 516.674.4INF (4463) www.infinitysystems.com Infinity is a registered trademark, and Infinity Beta and CMMD (patent nos. 6,327,372 and 6,404,897) are trademarks, of Harman International Industries, Incorporated. Part No. 352036-002 7/04