User manual INFOCUS IN72

IN70 Series User's Guide Please read the safety instructions booklet before setting up the projector. 1 Unpack the box Here's what's included: Projector Remote CD-ROM Composite Video Cable Power Cord M1-DA to HDMI Adapter (IN78 only) 2 1 Put batteries in the remote The remote uses 2 AA batteries. 2 + - + 3 Please dispose of batteries in an environmentally proper manner. Remote illumination Tap the button on the bottom of the remote for backlight, hold it down for flashlight* *Illumination features may not be available on all models 3 Connect source You can connect more than one source if needed. Connection How-To Guides www.infocus.com/support/howto Connect to: DVD, Cable Box, VCR, or Game Composite Video Cable (included) Stereo Audio Cable* (not included) Basic L Audio In R Video Out Audio Out L R DVD, Cable Box, VCR, or Game Home Theater or Receiver *www.infocus.com/store part no. SP-RCAAUD-5M OR Use optional cables (not included) for improved video quality Connect to: DVD, Cable Box, VCR, or Game Use: S-Video Cable Separates color from brightness to improve quality. S-Video Out Good To Audio In Audio Out L R DVD, Cable Box, VCR, or Game www.infocus.com/store part no. SP-SVIDEO-10M Connect to: HDTV Receiver or DVD Use: Component Video Cable Separates all color signals for better color accuracy. HDTV compatible. www.infocus.com/store part no. SP-CPNT Better To Audio In Video Out Y Pb Pr Audio Out L R HDTV Receiver or DVD Connect to: HDTV Receiver Use: HDMI Cable 100% Digital connection. HDTV compatible. HDMI Out Best To Audio In Audio Out L R HDTV Receiver www.infocus.com/store part no. SP-HDMI Connect to: SCART Source Use: SCART to RGBS Cable (RGB with sync) 1 Connect 4 color-coded connectors to corresponding connectors on projector. Connect to: DVI Source Use: M1 to DVI Cable 100% digital connection. Connect the cable to the projector's M1-DA/DVI connector. www.infocus.com/store part no. SP-DVI-D 2 Enable SCART RGB in the Source Enable menu (Settings > Sources > Source Enable). 4 Turn on projector and source 1 Connect the power cord to the projector and to an electrical outlet The green light on the projector near the power button will turn on. 2 Turn on the projector Press power (on the projector or remote). The green light on the projector will start blinking. 3 5-10 sec. Wait for the lamp to warm up After a few seconds, the green light will stop blinking and stay on. It can take a minute for the lamp to reach full brightness. Warning: Do not look directly into the lens when the projector is turned on. 4 5 Turn on the source device Turn on your DVD player, cable box, VCR, game, or HDTV receiver. Select the video source If needed, press source (on the projector or remote) to view the source. You may have to press it more than once. 5 1 Height Adjust the picture Projector location As distance increases, the image gets larger and moves upwards. Tilt the projector up or down. 2 Keystone Lens center line Interactive Screen Size and Distance Calculator www.infocus.com/calculator To make the picture square: 1 Press menu (on projector or remote). 2 Press or to highlight Picture, then press select. or to highlight Keystone, then press select. 4 Press or to adjust keystone. 5 Press menu to exit. IN72 Diagonal Screen Size 60" / 1.5 m 80" / 2 m 92" /2.3 m 150" / 3.8 m Distance to Screen Minimum Maximum 7'10" / 2.4 m 9'4" / 2.8 m 10'5" / 3.2 m 12' / 3.7 m 12'4" / 3.8 m 14'2" / 4.3 m 3 Press 3 Zoom and focus zoom (outer ring) focus (inner ring) 19'6" / 5.9 m 23'1" / 7 m IN74/IN76/IN78 Diagonal Screen Size 60" / 1.5 m 80" / 2 m 92" /2.3 m 150" / 3.8 m Distance to Screen Minimum Maximum 6'7" / 2 m 10'1" / 3.1 m 16'5" / 5 m 8'4" / 2.5 m 12'10" / 3.9 m 20'10" / 6.3 m Adjust zoom first, then focus the center of the image. 8'10" / 2.7 m 11'1" / 3.4 m 4 Aspect ratio Buy a Screen and Other Custom Accessories www.infocus.com/store Press resize (on the remote) to make the picture wider (16:9) or narrower (4:3). 6 Turn off the projector Press the power button The green light on the projector will blink while the fan cools the lamp. If you need to unplug the projector, wait until the fan stops and the green light stops blinking and stays on. Note: While the green light is blinking, button presses on the projector and remote are ignored. 7 1 Register with InFocus It's quick, easy, and secure. Activate your warranty to ensure eligibility for service and support. Get special offers and notifications about free product updates. Write down your projector's serial number It's printed on the label on the back of the projector. You'll need it to register (and if you ever need to contact InFocus support). Serial number: 2 Go to www.infocus.com/register 8 Read the Reference Guide and visit the InFocus web site Insert the CD-ROM, or go to www.infocus.com/support The Reference Guide is on the CD-ROM in multiple languages. It covers advanced setup and operation, including lamp replacement instructions. The Reference Guide is also available at www.infocus.com/support Troubleshooting There is no picture or the image is blank Check power If the light on the projector near the power button is off, make sure the power cord is connected and plugged into a working electrical outlet. If the light is green and not blinking, press the power button. Check video source and cables Make sure the video source (DVD player, cable box, VCR, game, HDTV receiver, etc.) is turned on and cables are securely connected between the source and the projector. Press the Source button (on projector or remote) You may need to press it several times to view the correct source. Press the Auto Image button (on remote) The picture is unstable or distorted, or "Signal out of range" is displayed Press the Auto Image button (on remote) The light on the projector is blinking red Check air vents and lamp Turn off the projector and remove anything that may be blocking its air vents. Leave the projector off for at least one minute to let it cool, then turn it on again. If the projector lamp won't light and the red light starts to blink again, the lamp needs to be replaced. For lamp replacement instructions, see the Reference Guide, which is on the included CD-ROM or can be downloaded at www.infocus.com/support More troubleshooting options are in the Reference Guide The Reference Guide is on the included CD-ROM, or download it at www.infocus.com/support Warning: In the unlikely event of a lamp rupture, particles may be ejected from the projector. Keep out of the area under and around the projector when it is turned on. See the safety instructions booklet for more details. Questions? InFocus is here to help! Visit us at: www.infocus.com/support InFocus is here to support you with your new purchase. We can help you with... · Determining screen sizes · Documentation in other languages · Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.) · Selecting optional accessories · Product warranty protection plans USA, Canada, Latin America Customer Support Telephone +1 (503) 685-8888 TOLL FREE: 800-799-9911 Mon-Fri, 7 am ­ 5 pm Pacific techsupport@infocus.com Asia Pacific Customer Support Telephone Singapore: +65 63539449 China: 800.828.2268 Australia: 1300-725-295 Australia Direct Sales: 1800-885-841 Mon-Fri, 9 am ­ 5 pm SGT asia-support@infocus.com Europe, Middle East, Africa Customer Support Telephone +31 (0)36 539 2820 Mon-Fri, 08:30 ­ 18:00 CET emea.support@infocus.com Warning: Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org Declaration of Conformity Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USA European Office: Louis Amstrongweg 110, 1311 RL Almere, The Netherlands We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 89/336/EEC, Amended by 93/68/EEC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC, Safety: IEC 60950-1:1st Edition Trademarks Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. InFocus, In Focus, and INFOCUS (stylized), LP, LiteShow, ScreenPlay, LitePort, ASK and Proxima are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries. FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the user's authority to operate the equipment. Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Agency Approvals Product Models: P720, P740, P760 UL, CUL, NOM, IRAM, GOST, C-tick Other specific Country Approvals may apply. Please see product certification label. InFocus reserves the right to alter product offerings and specifications at any time without notice.