Detailed instructions for use are in the User's Guide.
Wireless Access Point 802.11g
Manual
Table of Contents
Chapter 1 Introduction..............................................................................1
1.1 1.2 1.3 1.4 Package Contents ..........................................................................................2 Features..........................................................................................................2 Specifications ................................................................................................2 Physical Description......................................................................................3
Chapter 2 Wireless LAN Access Point Connection ................................5 Chapter 3 Wireless LAN Access Point Configuration............................6
3.1 Getting Started...............................................................................................6 3.2 Configuring the Access Point......................................................................11
3.2.1 3.2.2 3.2.3 3.2.4 3.2.5 3.2.6 3.2.7 3.2.8 3.2.9 3.2.10 3.2.11 3.2.10 Client Mode configuration................................................................................. 12 AP Mode configuration...................................................................................... 15 Repeater Mode configuration ............................................................................ 17 P2P Mode configuration .................................................................................... 20 PMP Mode configuration ................................................................................. 21 WEP Setting.................................................................................................. 23 WPA Setting ................................................................................................. 25 Advanced Setting.......................................................................................... 26 Access Filter ................................................................................................. 27 Status Setup .................................................................................................. 29 Admin Setup ................................................................................................. 30 LAN Setup .................................................................................................... 32
Charpter 4 Troubleshooting ...................................................................33
Chapter 1
Introduction
This product is an access point for IEEE 802.11g/b 2.4GHz wireless network. You can use this access point to build up a wireless LAN. The product supports WPA-PSK, WEP, ESSID and MAC address filter functions to consolidate the wireless network security. With ESSID authentication, WPA-PSK, 64/128 bit WEP encryption and MAC address filtering you can prevent unauthorized wireless stations from accessing your wireless network. The product's dipole antenna is detachable by connecting to a RP-SMA connector. Users can install a high gain antenna to the connector for better network link quality so that you can build wireless network with more flexibility. This product provides easy to use user interface and allows users to configuring from web browser. With the versatile of features, this product is the best choice for you to integrate your wireless and wired network seamlessly.
1.1 Package Contents
The Access Point includes the following items: One Access Point One Power Adapter One User's Manual
1.2 Features
Complies with the IEEE 802.11g/b 2.4GHz specification. High data rate 54, 48, 36, 24, 18, 12, 11, 5.5, 2 and 1Mbps network speed. Seamlessly integrate wireless and wired Ethernet LAN networks. Auto rate fallback in case of obstacles or interferences. Provide 64/128-bit WEP Data Encryption function to protect the wireless data transmissions. Supports Web-based configuration.
1.3 Specifications
Standards: IEEE 802.11g/b (Wireless), IEEE 802.3 (Wired) Data Rate: 54/48/36/24/18/12/11/5.5/2/1Mbps auto fallback Security: 64/128-bit WEP Data Encryption Frequency Band: 2.400~2.4835GHz (Industrial Scientific Medical Band) Antenna: External detachable dipole antenna (with RP-SMA connector) Connectors: 10/100Mbps RJ-45 x 1
Power: 12VDC, 1A Transmit Power: 16dBm (Typical) LEDs: Power, LAN Link/Activity, Wireless Activity Dimension: 30(H) x 127(W) x 87(D) mm Temperature: Operating: 32~131°F (0~55°C) Storage: -4~158°F(-20~70°C) Humidity: 10-90% (Noncondensing)
1.4 Physical Description
Front Panel
On the Access Point's front panel there are LED lights that inform you of the Access Point's current status. Below is an explanation of each LED.
LED Power
Color Green
Status Lit Off Flash Off
Description Power is supplied. No Power. Antenna is transmitting or receiving data. Antenna is not transmitting or receiving data. A valid link is established. It is transmitting or receiving data. No link is established.
Wireless Activity
Green
LAN Green Link/Activity
On Flash Off
Back Panel
Access Point's connection ports are located on the back panel. Below is the description of each connection port.
1 Antenna Connector This round connection is standard Reverse SMA connector where any antennas with Reverse SMA connector can connect to the Access Point. 2 DC Adapter Port Insert the power jack of the power adapter into this port. 3 LAN Port The Access Point's LAN port is where you connect to your LAN's network devices. 4 Reset The Reset button allows you to do one of two things. 1) If problems occur with your Access Point, press the reset button with a pencil tip (for less than 5 seconds) and the Access Point will re-boot itself, keeping your original configurations. 2) If problems persist or you experience extreme problems or you forgot your password, press the reset button for longer than 5 seconds and the Access Point will reset itself to the factory default
settings (warning: your original configurations will be replaced with the factory default settings).
Chapter 2 Wireless LAN Access Point Connection
1. Locate an optimum location for the Wireless LAN Access Point. The best location for your Access Point is usually at the center of your wireless network, with line of sight to all of your mobile stations. 2. Connect the Wireless LAN Access Point to your router, hub or switch. Connect one end of standard UTP cable to the Access Point's LAN Port and connect the other end of the cable to a switch, a router or a hub. The Access Point will then be connected to your existed wired LAN Network. 3. Connect the DC Power Adapter to the Wireless LAN Access Point's Power Socket. Only use the power adapter supplied with the Access Point. Using a different adapter may damage the product.
The Hardware Installation is completely also you can start to enjoy the wireless network environment. Please follow below step to access the UI to configure the more function.
Chapter 3
Wireless LAN Access Point Configuration
3.1 Getting Started
This Access Point provides web-based configuration tool allowing you to configure from wired or wireless stations. Follow the instructions below to get started configuration. From Wired Station 1. Make sure your wired station is in the same subnet with the Access Point. The default IP Address and Sub Mask of the Access Point is: Default IP Address: 192.168.2.1 Default Subnet: 255.255.255.0 Configure your PC to be in the same subnet with the Access Point. 1a) Windows 95/98/Me
1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2. Double-click Network icon. The Network window will appear. 3. Check your list of Network Components. If TCP/IP is not installed, click the Add button to install it now. If TCP/IP is installed, go to step 6. 4. In the Network Component Type dialog box, select Protocol and click Add button. 5. In the Select Network Protocol dialog box, select Microsoft and TCP/IP and then click the OK button to start installing the TCP/IP protocol. You may need your Windows CD to complete the installation. 6. After installing TCP/IP, go back to the Network dialog box. Select TCP/IP from the list of Network Components and then click the Properties button.
7. Check each of the tabs and verify the following settings: Bindings: Check Client for Microsoft Networks and File and printer sharing
for Microsoft Networks. Gateway: All fields are blank. DNS Configuration: Select Disable DNS. WINS Configuration: Select Disable WINS Resolution.
IP Address: Select Specify an IP Address. Specify the IP Address and Subnet Mask as following example. 1 IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is available, do not setup 192.168.2.1) 2 Subnet Mask: 255.255.255.0
8. Reboot the PC. Your PC will now have the IP Address you specified.
1b) Windows 2000
1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2. Double-click Network and Dial-up Connections icon. In the Network and Dial-up Connection window, double-click Local Area Connection icon. The Local Area Connection window will appear. 3. In the Local Area Connection window, click the Properties button. 4. Check your list of Network Components. You should see Internet Protocol [TCP/IP] on your list. Select it and click the Properties button.
5. In the Internet Protocol (TCP/IP) Properties window, select Use the following IP address and specify the IP Address and Subnet mask as following. IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is available, do not setup 192.168.2.1) Subnet Mask: 255.255.255.0
6.
Click OK to confirm the setting. Your PC will now have the IP Address you specified.
1c) Windows NT
1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2. Double-click Network icon. The Network window will appear. Select the Protocol tab from the Network window.
3. Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed, click the Add button to install it now. If TCP/IP is installed, go to step 5. 4. In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok button to start installing the TCP/IP protocol. You may need your complete the installation.
Windows CD to
5. After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network Protocols and then click the Properties button. 6. Check each of the tabs and verify the following settings:
IP Address: Select Specify an IP address. Specify the IP Address and Subnet Mask as following example. 3 IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is available, do not setup 192.168.2.1) 4 · · · Subnet Mask: 255.255.255.0
DNS: Let all fields are blank. WINS: Let all fields are blank. Routing: Let all fields are blank.
7. Click OK to confirm the setting. Your PC will now have the IP Address you specified.
2. Enter 192.168.2.1 from Web Browser to get into the Access Point's configuration tool. 3. A screen will be popped up and request you to enter user name and password. The default user name and password is as follows. User Name: Admin Password: 1234 Enter the default user name and password, then press OK button directly.
4. You can start configuring the Access Point. From Wireless Station 1. Make sure your wireless station is in the same subnet with the Access Point. Please refer to the step 1 above for configuring the IP Address and Sub Mask of the wireless station. 2. Connect to the Access Point. The Access Point's ESSID is "default" and the WEP Encryption function is disabled. Make sure your wireless station is using the same ESSID as the Access Point and associate your wireless station to the Access Point. 3. Enter 192.168.2.1 from Web Browser to get into the Access Point's configuration tool. 4. Enter the user name and password and then press OK button and you are available to configure the Access Point now.
3.2 Configuring the Access Point
This Access Point supports Client, AP, Repeater and Bridge modes. "Client Mode" is used to let a network device with only wired Ethernet function to have wireless LAN communication capability. It provides both Ad Hoc and Infrastructure modes for the "Station Mode". With "Station-Ad Hoc mode", it can let your network device join a wireless LAN with peer-to-peer communication. With "Station-Infrastructure mode", it can let your network device join a wireless LAN through an access point. "AP Mode" provides pure access point function. The simplest way to build up a wireless LAN is to use "AP Mode". If you want an access point to bridge wired Ethernet network and provide connection service for other wireless station at the same time, you have to set the access point to "Repeater mode". Simply speaking, "Repeater mode" function is the combination of "AP mode" and "PMP mode". "AP Bri ...
