Wireless USB Print Adapter with Bluetooth T echnology User Manual (GBP201) Welcome Thank you for purchasing the IOGEAR wireless USB print adapter with Bluetooth technology. This print adapter is a first rate connectivity accessory designed to help reduce the frustration of dealing with cables in your home or office. IOGEAR wireless USB print adapter with Bluetooth Technology allows Bluetooth enabled computers to send print job wireless to USB printers. ©2004 IOGEAR. All Rights Reserved. PKG-M0111 IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this document. Package Content Overview Features Requirements Introduction Installation Operation Specification Technical Support Radio and TV Interference Statement Limited Warranty Table of Contents 21 20 19 18 17 7 6 5 4 3 2 Package Contents This package contains: 1 Bluetooth print adapter 1 USB B-B cable 1 User manual 1 Warranty registration card * If any items are damaged or missing, please contact your dealer. 2 Overview IOGEAR's palm sized single-port Wireless USB Print Adapter with Bluetooth Technology allows any Bluetooth enabled computer to wirelessly send print jobs to a USB printer. It complies with USB 1.1 specifications and the Bluetooth 1.1 specifications. It supports data transmission rates of up to 723 Kbps, and a wireless access range of up to 66 ft (20 meters). This unit supports HCRP (Hardcopy Cable Replacement Profile) and SPP (Serial Port Profile), all of which resides on onboard flash memory. This is a plug-n-play unit, it doesn't require any special driver, plug it on the USB printer is all that entails. 3 Features · Allows any Bluetooth enabled computer to wirelessly send the print job to a USB printer · Plug and Play, easy to install · Bluetooth Class 2 device with a 66 ft range (20 meters) · Supports data rate of 723 Kbps · Supports Pico-net and Scatter-net and up 7 devices · Complies with USB 1.1 specifications and the Bluetooth 1.1 specifications · Supports HCRP (Hardcopy Cable Replacement Profile) and SPP (Serial Port Profile) 4 System Requirements · Printers with USB interface. * Multi function printers not supported. · Bluetooth enabled computers. 5 Introduction 1. USB Port ­ connect to the USB printer. 2. Power LED ­ Red after powered on. 3. Link LED ­ Flashes green after powered on. 4. Power ­ 5V, 1A. 1 2 3 4 6 Installation First of all, the computer that you plan to print from needs to have the printer driver, the easiest way is to install the printer driver first. Due to the fact that all printer manufacturers have somewhat different procedure to install the printer driver, we do not cover the printer driver installation in this manual. Also, we do not cover the procedures of installing Bluetooth driver to your computer, we assume the computer is already Bluetooth enabled. If you are using an IOGEAR Bluetooth USB adapter, please refer to the manual for that unit for the detailed procedures. The example below uses Epson C62 as the printer, the printer driver is installed after the installation of the Bluetooth print adapter. Here are the steps: Turn off the power of the printer; Connect the Bluetooth print adapter to the printer using the USB B-B cable; Turn on the power for the printer and plug the power adapter on the print adapter; Configure the print adapter: 7 Installation 1. From the Bluetooth enabled computer, click the Bluetooth logo on your screen, then click My Bluetooth Place, then select Entire Bluetooth Neighborhood. 8 Installation 2. You can see that the computer starts searching for the Bluetooth devices within the range. The Bluetooth print adapter should be found as shown in the follow window: 9 Installation 3. Double click on the icon of the IOGEAR Bluetooth adapter. Click OK on the prompted question. (This question would not be prompted if the printer driver is already installed.) 10 Installation 4. The following window will be prompted for you to select the appropriate driver. (This step would be skipped if the printer driver is already installed.) 11 Installation 5. Select the appropriate driver, or click on "Have Disk...". Follow the installation step provided by the printer manufacturer. 6. After the driver installation, go to Control Panel, and select Printers, the printer that you just installed should be in the following window: 12 Installation 7. Right click the printer icon (in this case the Epson C62), select Properties from the drop down menu. 13 Installation 8. Select Ports on the Printer Properties screen, and check the IOGEAR print adapter port, then click OK. 14 Installation ...