User manual IOMEGA JAZ 1GO INTERNE

1­ S O D D O S s/ w o d in in d o s/ w W W Iomega's Automated Help Systems ® drive Internet Home Page: ............................................................ http://www.iomega.com America OnlineTM ................................................................ Keyword: Iomega Microsoft Network ............................................................... GoWord: Iomega Automated FAX Help (U.S. & Canada only) ..................... 1-801-778-5763 Automated E-Mail ................................................................ support@iomega.com (Please type "Jaz" in the subject header when sending your E-Mail) Iomega Bulletin Board ......................................................... 1-801-778-5888 8,N,1; 9600 baud and above; ANSI (24 hrs - Download only) Repair and Return Information ........................................... 1-801-779-6100 (No technical support information is available at this number.) SCSI SCSI SCSI SCSI SCSI One-on-One Iomega Technical Support One-on-One Technical Support is free of charge for issues Iomega determines relate to a defect in an Iomega product. Other issues are charged at the rate of $19.99 per incident for Jaz products. You can call 1-888-4-IOMEGA, toll-free, to charge the support cost to your credit card (VISA, MasterCard, American Express, or Discover), or you can call 1-900-988-4747 to put the support cost on your phone bill. Either way, the charge will be reversed if your issue is found by Iomega to be due to a product defect. Iomega's technical support associates are ready to take your call Monday through Friday from 6 a.m. to 6 p.m. Mountain time (U.S. & Canada only). European Support Numbers Refer to the electronic manual included with your Jaz software package for a complete list of European support numbers. © 1997 Iomega Corporation. Iomega, the Iomega logo and Jaz are registered trademarks of, and the graphic swirl, hand, and eye are trademarks of, Iomega Corporation. All other product and brand names are the property of their respective companies. Installation Guide EN143604 Printed on recycled paper 1 GB 2 1 Installation Guide Jaz "tools" Disk (contains Jaz Tools software) Jaz Drive Manuals and Install Diskettes Windows NT Users You may need to install driver software for your SCSI adapter. Refer to NTReadme.txt on the Windows NT Install diskette for additional information. · CAUTION Before handling the Jaz drive, touch a grounded metal object (like an unpainted metal screw on your computer) to discharge any buildup of personal static electricity. Unpack the Jaz drive and accessories. · Your computer MUST have an internal SCSI adapter or connection for the Jaz drive. Check your SCSI (Small Computer System Interface) connection. If you plan to use a non-Iomega SCSI adapter, refer to "Non-Iomega SCSI Adapters" in the Jaz User's Guide. If you plan to use an Iomega SCSI adapter, install it NOW using the installation guide shipped with the adapter; then return to step 2 below. If you need to purchase an adapter, call your Iomega dealer or 1-800-MY-STUFF. 1 B G 3 Data Cable 3.5" Universal Installation Kit (includes mounting screws) WARNING Always disconnect computer electrical power before beginning a computer hardware change. Turn OFF the computer power switch, and DISCONNECT the computer power cord. 1t oo ls 3.5 "U NIV E A RS L IN ST AL LA TIO N KIT In sta ll In sta ll 5 4 31/2-inch Bays (after selecting bay, go to step 6) 5a Remove the cover from your computer. (Refer to your computer manual if removal is unclear.) Locate a vacant 31/2-inch or 51/4-inch drive bay. See notes in illustration for the next step. Instructions for assembling the mounting bracket are printed on the box. Use the 3.5" Universal Installation Kit to assemble a 5.25" mounting bracket and attach it to the drive, then go to step 6. 51/4-inch drive bays ONLY: Disconnect power 51/4-inch Bay (after selecting bay, go to step 5a) A 2­ ta tta 3­ A b ch S tta fir th bo lid ch st e , 4­ as ttoe th th le A se mth e en ft e dr lig m D ra ho di C re il N bo iv n bl th y. le sk cape 1 th O th e s dr at to as e bl ho e TE cl di V of iv e pr th w br : 6 ip pi sk er th e e ct 4 oc ify ev ac S ta ur dr e in on esfa to ce er ke cr bs ed iv th di s T ts ew en . e at sk po to fo pl H to s re th at ga S tano dr sitio e r e IS th th w lig iv IS e er ge ht in ga e n, co e 3 in in N di e th ly g ps with al nn rig se O sk pr e fle cl ar ig ec ht rt T dr ov sl ni x ip e po ngto ra bo A iv id ot th r il 5 pr st N e ed s e ov es s th of tto on E if dr er en of e th m C dein E th e th th iv S si is e e th t on e di S re cl e sk A d, ki bo ip ce th br ac dr R t tto an nt e to Y ke iv m d er fa S e. fu of pu of ce t T E rthe ea sh th pl P r ch e at ! se do e. di cu ra w sk re il. n un til G B 6 7 Check mounting requirements: Your drive bay may require side rails. (HINT: Use the same side rails as on similar drives in your system. See your computer dealer for any special hardware.) 13 Good job! Now check all connections, arrange the cables to fit under the cover, and replace the computer cover. Reconnect power Slide the Jaz drive into the drive bay. 31/2-inch Installations IMPORTANT! If your Jaz drive will be part of a SCSI chain, check the SCSI ID BEFORE sliding the drive into the drive bay. (See Jaz User's Guide.) 51/4-inch Installation 14 15 Reconnect power cord, turn ON power switch, and wait for DOS or Windows to come up. Gently insert the 1GB Jaz "tools" disk into the Jaz drive. The drive status light on the Jaz drive flashes as the disk spins up and glows steadily while it acquires. When the light goes out, the drive is ready to use. To eject a Jaz disk, push the disk eject button. The drive will take a few seconds to spin down and eject the disk. Disk shown fully inserted 8 Connect a computer power supply cable. Jaz Drive If your computer has no spare power supply cable, you will need to use a power Y-cable. Call your dealer or 1-800-MY-STUFF to order. G B 1 to o ls 1 B G Power Supply Cable Drive-Status Light Disk Eject Button Disk shown ejected from drive 9 Connect the data cable connector that is closest to the termination block to your Jaz drive. (Connector fits only one way.) Jaz Drive CAUTION Never put anything except Jaz disks into the Jaz drive as this could damage your drive. Pin One If there is more than one internal drive in the SCSI chain, you will need to use a different data cable in order to daisy-chain your internal devices. Call 1-800-MY-STUFF to order. Cable Connector 16 Insert the Install diskette for your system into your computer's floppy drive. Use Disk 1 if your computer is running Windows 95, Windows 3.1, or DOS. Use Disk 2 if your computer is running Windows NT. Termination Block 10 11 Find the colored stripe (or printing) on one side of the data cable, showing PIN 1. Stripe or printing shows the PIN-ONE side of the data cable. W in d o In ll aS st DO s/ w Connect the PIN 1 side of the data cable to PIN 1 on the SCSI adapter (or other SCSI connector). (Check the adapter documentation to identify PIN 1 position.) PIN 1 PIN 1 17 Start the Setup or Install program as described below and follow the screen instructions to install your Jaz Tools software. Windows® 95 Users: Open My Computer and double click on the floppy drive icon to open a window for Install Disk 1. Double click on the Setup icon to install Tools 95 on your system. Windows NT Users: Run SetupNT from Install Disk 2 to install your ToolsNT software package. Windows 3.1 Users: Start Windows. In the Windows Program Manager, select the File menu and choose Run. In the Command Line box, type a:setup if Install Disk 1 is in drive a: (or b:setup if it is in drive b:), then click OK or press the Enter key. DOS Users: Run GUEST.EXE from the DOS prompt for Install Disk 1, then run INSTALL.EXE from the DOSSTUFF directory on the Jaz "tools" disk. After the software installation is complete, run RECLAIM.EXE from the DOSSTUFF directory. If you need detailed instructions, refer to MANUAL.EXE on Install Disk 1. If you need help, refer to "Troubleshooting" in the Jaz User's Guide. The electronic manual (MANUAL.EXE) located on Install Disk 1 also includes problem solving information for software installations under Windows 95, Windows 3.1, and DOS. IMPORTANT! Your 1GB Jaz "tools" disk contains installation files for your Jaz Tools software. Avoid deleting the installation files for your system in case you need to reinstall your software. Some adapters have a keyed connector to help PIN 1 connection. Some adapters have PIN 1 toward rear of computer. Some adapters have PIN 1 toward front of computer. 12 Secure drive in drive bay using the screws included in the 3.5" Universal Installation Kit. (If necessary, refer to your computer manual for instructions on how to access drive bay mounting holes.) 31/2-inch Drive Bay 51/4-inch Drive Bay with Bracket Congratulations! When the software installation is complete, your Jaz drive will be ready to use. Use your Jaz drive just like any other drive on your system. You can store and copy files to and from the Jaz drive using the same methods you use for your other drives. For more information about using your new drive and Jaz Tools software, refer to the Jaz User's Guide. Drive Bay Metric Mounting Screws EN143604