E100 User manual Contents Getting Started Components 4 LCD Display 6 Locating the Controls 5 Installing iriver plus 3 8 Turning the Product on/off 10 Menu selection 11 Using HOLD and RESET 12 Connecting Products 13 Basic Operations Using the Product Music 20 Texts 27 Other Information Videos 23 Pictures 25 FM Radio 29 Settings 33 Recordings 31 iriver plus 3 Using the Product 36 Copyrights/Certification/ Trademarks/Limited Liability 40 Safety Instructions 41 Troubleshooting 44 File Manager 32 E100 01 Getting Started Components 4 LCD Display 6 Locating the Controls 5 Installing iriver plus 3 8 iriver Getting Started Music Videos Pictures Texts FM Radio Recordings File Manager Settings Components Components are subject to change without notice and may vary from images shown. E100 Earphones Quick Start Guide & Warranty Card Installation CD & Manual USB cable iriver Getting Started Music Videos Pictures Texts FM Radio Recordings File Manager Settings Locating the Controls Micro SD card slot RESET pinhole Speaker LCD Volume button MIC OK button Menu buttons POWER button HOLD switch LINE-IN jack USB jack Earphone jack iriver Getting Started Music Videos Pictures Texts FM Radio Recordings File Manager Settings LCD Display While playing music Playing previous file HOLD Current time Album art Play Mode Battery Rewind Current video Volume While playing video Previous Album Info Rating EQ Play next file A-B repeat Progress bar Progress bar Elapsed time / Total playing time for the current file File name Fast Forward Elapsed time / Total playing time iriver Getting Started Music Videos Pictures Texts FM Radio Recordings File Manager Settings LCD Display FM Radio While recording voice Current frequency Options Current status Frequency indicator Preset ON / OFF Channel number Recording quality Recorded time / Remaining time iriver Getting Started Music Videos Pictures Texts FM Radio Recordings File Manager Settings Installing iriver plus 3 iriver plus 3 gives you freedom to transfer music, video and picture files from PC to the device. 1. Insert the installation CD into your PC to display the installation process screen. 2. Select iriver plus 3 and click the Install button. Complete the installation process by following the on-screen instructions. Notice... iriver plus 3 is an integrated software application that efficiently manages music, video, and picture files. Minimum requirements for using iriver plus 3 Windows® 2000/XP Intel® Pentium® ll 233 MHz or higher processor speed 64 MB or greater memory 30 MB or greater hard disk space 16-bit enabled speaker and sound card Microsoft Internet Explorer version 6.0 or later SVGA or high resolution monitor (1024x768 resolution or greater) Windows® Vista (Windows® Vista only supports the 32-bit version and does not support the 64-bit version.) Intel® Pentium® ll 800MHz or higher processor speed 512 MB or greater memory 20 GB or greater hard disk space 16-bit enabled speaker and sound card Microsoft Internet Explorer version 6.0 or later SVGA or high resolution monitor (1024x768 resolution or greater) For more information on using iriver plus 3, refer to pages 36 - 39. 02 Basic Operations Menu selection 11 Turning the Product on/off 10 Using HOLD and RESET 12 Connecting Products - Connecting Earphones to the E100 13 - Charging the product 13 - Inserting / Removing the micro SD card 14 - Recommended micro SD card types 15 - Connecting the E100 to your PC 16 - Copying files / folders to the product 17 - Deleting files / folders from the product 17 - Disconnecting the E100 from your PC 18 iriver Basic Operations Music Videos Pictures Texts FM Radio Recordings File Manager Settings Turning the Product on/off Turning on the product 1. Press and hold the turn it on. button on the product to Turning off the product 1. Press and hold the turn it off. button on the product to Notice... This product has an automatic power saving function to save battery power. Based on the settings in power save mode, the product will be automatically turned off after a pre-determined period without operation. For more information on setting this mode, refer to Settings > Timer > Auto Power off. (Refer to page 33.) 10 iriver Basic Operations Music Videos Pictures Texts FM Radio Recordings File Manager Settings Menu selection 1. In the main menu, press the / button to select the menu. 2. Press and hold the button to display the main menu from any operation screen. 11 iriver Basic Operations Music Videos Pictures Texts FM Radio Recordings File Manager Settings Using HOLD and RESET Using HOLD 1. Slide the HOLD switch to the direction of arrow as shown below to lock the product. Using RESET 1. If the player stops and does not respond to any commands, press the RESET pinhole. 2. Slide the HOLD switch the opposite direction to unlock the product. Notice... Performing RESET does not delete the date / time settings and data in the integrated memory. 12 iriver Basic Operations Music Videos Pictures Texts FM Radio Recordings File Manager Settings Connecting Products Connecting Earphones to the E100 1. Connect earphones to the earphone jack. Notice... Charging the product 1. Turn on your PC and connect the E100 to it using the USB cable provided. 13 While the product is connected to a PC using the USB cable, the integrated battery will be charged automatically. Do not use any USB cable other than the one included with the product. It may cause a malfunction. Check if the E100 is connected to a high-power USB 2.0 port. Some low-power USB ports built into certain peripheral devices, such as some types of keyboards and USB hubs without integrated power may not provide enough power to charge. While the PC is switched to standby mode, the product may not be charged. Charge the product only at room temperature. The product may not be charged in extreme hot or cold temperatures. The charging time might be extended if you use the product while charging. iriver Basic Operations Music Videos Pictures Texts FM Radio Recordings File Manager Settings Connecting Products Inserting / Removing the micro SD card 1. Open the cover of micro SD card after turning off the product. 2. Insert and slightly press a micro SD card in the direction as shown below. 3. Press again to remove the micro SD card. Notice... Be sure to insert / remove a micro SD card only after turning off the product. Do not use excessive power to insert a micro SD card. This can cause product malfunction or damage the micro SD card. Do not remove a micro SD card while in use. This can cause a deletion of data, product malfunction or damage micro SD card. Do not insert or remove a micro SD card repeatedly. If you insert a micro SD card improperly, it can cause product malfunction or cause the card to jam. 1 iriver Basic Operations Music Videos Pictures Texts FM Radio Recordings File Manager Settings Connecting Products Recommended micro SD card types Manufacturer: SanDisk Notice... Using improper type of micro SD card may cause product malfunction. Transfer speed of micro SD card is variable depending on your PC. Always backup valuable data first since formatting the micro SD card will delete all data on it. Do not turn off the product or remove a micro SD card while it is being formatted. This can cause a malfunction of the product and damage the micro SD card. It is recommended to format a micro SD card as a FAT32 system in case its size is over 2 GB. If a micro SD card has already been formatted by the product, reset the product after disconnecting the USB cable and connect the cable again. Format the micro SD card if it is not detected or causes a malfunction. The micro SD card is not included with the product. (Optional item) The E100 supports micro SD cards up to 4 GB. 1 iriver Basic Operations Music Videos Pictures Texts FM Radio Recordings File Manager Settings Connecting Products Connecting the E100 to your PC 1. Press and hold the button on the product to turn it on. 2. Turn on your PC and connect the E100 to it using the USB cable provided. 3. If properly connected, the LCD will display as below. Charge & Data Transfer : The product is currently being charged and data is being transferred. Charge & Play : The product is currently being charged and a file is being played. Charge :The product is currently being charged. 1 iriver Basic Operations Music Videos Pictures Texts FM Radio Recordings File Manager Settings Connecting Products (Using as a removable disk) Copying files / folders to the product 1. Select the desired files / folders in your PC and drag & drop to the drive which appears as the product. Deleting files / folders from the product 1. After selecting the desired file / folder, right-click with your mouse and select Delete. 2. Click Yes in the Confirm File Delete / Confirm Folder Delete popup window to delete the file / folder. Notice... Always connect the USB cable properly. While transferring data using the USB cable, never disconnect it or turn off the power to protect your data from loss or damage. 1 iriver Basic Operations Music Videos Pictures Texts FM Radio Recordings File Manager Settings Connecting Products Disconnecting the E100 from your PC 1. Click the icon on the taskbar to disconnect the product using the Safely Remove Hardware menu. 2. Click the [Stop] button to confirm disconnection. Notice... The icon on the taskbar may be hidden in some operating systems. Click Show hidden icons to display the hidden icon. The Safely Remove Hardware function may not be available while using some applications such as Windows Explorer or Windows Media Player. Close all applications first before performing the Safely Remove Hardware. If the Safely Remove Hardware is not performed properly, try again after a few minutes. If the product is removed without observing the above process, data in the product might be damaged. 1 03 Using the Product Music - Selecting Music 20 - Playing Music 20 - Additional Features 21 Videos - Selecting Video 23 - Playing Video 23 - Additional Features 24 Pictures - Selecting Pictures 25 - Viewing Picture 25 - Additional Features 26 Texts - Selecting Text 27 - Viewing Text 27 - Additional Features 28 FM Radio - Listening to FM Radio 29 - Scanning FM Radio Station 29 - Additional Features 30 Recordings - Recording 31 - Additional Features 31 File Manager Settings - Browsing Device 32 - Deleting File 32 - Selecting Setting 33 - Date & Time 33 - Display 33 - Timer 33 - Advanced 34 iriver Music Videos Pictures Texts FM Radio Recordings File Manager Settings Music Using the Product Selecting Music Playing Music Press the +/- button to control the volume. Press the button to pause or resume. While playing, press the / button to play the 1. In the main menu, press the / button to select Music and press the button. 2. Press the / button to select the item and press the or button. 3. Press the / button to select the file and press the or button. / button to play fast forward or reverse. Press the button while playing to select the beginning (A) point. Press it again to select the end (B) point. The designated section between A and B will be played. Press the button again to deactivate the repeat playback. While playing, press the button to return to the previous menu. While playing, press and hold the previous / next music. Notice... Supported file formats: MP3, WMA, OGG, FLAC, ASF In the Music mode, only music files in the Music folder will be displayed. To play other music files in any other folder, use the File Manager mode. You can manage your own playlist using iriver plus 3. When a micro SD card is inserted, you can display the file (folder) list by selecting Internal Memory / External Memory. 20 iriver Music Videos Pictures Texts FM Radio Recordings File Manager Settings Music Using the Product Additional Features Press and hold the button to display the Options screen. Play Mode Selects the play mode which decides the playing order. Normal: Deactivates the play mode. Repeat: Repeats all files. Repeat One: Repeats one file. Shuffle: Randomly plays files in the current DB. Shuffle + Repeat: Randomly repeats files in the current DB. Setup Sound Sets the sound effect. - Custom EQ: Changes levels of each frequency range to create your own equalization. - SRS WOW HD: Sets the levels of 3D sound effect. - SRS: Customizes the SRS 3D sound effects. - TruBass: Customizes the bass sound level - Focus: Sets sound clarity. - WOW: Sets the proper boost level according to earphone type. - Definition: Produces sharper and clearer sound. - Fade-In: Volume increases gradually when playback starts. Select EQ Selects the EQ to be used for playing music. Notice... To avoid sound distortion, do not set the levels of Cus ...