User manual IRIVER N10

User's Manual N10 http://www.iriver.com Thank you for purchasing the product. Please read the manual carefully before use. Chapter I Quick Start I Turning on/off the Player Listening to music 2 2 Recording Charging the Player 3 4 1 Quick Start Quick Start Turning on/off the Player Playing Music Type A Type B 1 I Turning on the player again to play music. Press the PLAY/STOP button to turn the player on. 2 I Playing music Press the PLAY/STOP button to play music. I Press the PLAY/STOP button 3 I Selecting track 1 I Connecting earphones Connect the earphones as shown above. : Selects the previous track. : Selects the next track. 4 I Controlling volume + : Increases volume - : Decreases volume Press and hold 2 I Turning off the player Press and hold the PLAY/STOP button to turn the player off. The player will power off after a period of time with no-activity (not playing music, etc.). Please see Page 46 to adjust this setting. 2 I 1 Quick Start I Quick Start Quick Start Recording Voice Press and hold Recording Voice 1 I Navigating menu 2 Press the / Press and hold the MENU button. 4 I Starting recording Press the MENU button. - Recording will be started. I Selecting Voice Recording button to select [Voice]. 5 I Finishing recording Press the MENU button again. - Recording will be finished. 3 I Recording Stand By Press the PLAY/STOP button. - The player will be in standby mode with displaying RECORD READY on LCD. 6 I Listening to recording file Press the PLAY/STOP button after stopping recording to play the recorded file. 3 Quick Start Guide Charging the Player Note ... 1 I Charging with USB cable. Push the "PUSH OPEN" on the back of your player to disconnect its cap as shown below. Connect the USB port and PC with USB cable to charge battery. The player will charge automatically when the player is connected to the PC. 4 l Player will charge even when powered off. l Charging time: Approx. 1.5 hours (At full discharge, Stop mode) Chapter I Getting started I Greetings Copyright and Certifications Trademarks and Disclaims Features 6 6 7 9 Accessories Locating the Controls LCD Display 9 10 11 2 Getting started Getting started Greetings I Thank your for your iriver purchase. Also, welcome to the world of N10, the market-leading MP3 player. We are sure that the iriver's N10 player may sufficiently satisfy you and make your life more enjoyable. This user's manual is provided to help you safely use the product. Please read this manual carefully before using it. Thank you. I http://www.iriver.co.kr The iriver's home page provides the overview of company and products, other related information, and answers to common questions. Firmware and software updates are also available as well as the most recent information about your iriver product. You may get useful information from "User's Forum" and FAQ. Register your ID and get any appropriate online customer support. Also, you can get newsletter such as newly announced product, firmware upgrade, various promotion events via email. Copyright and Certifications I Copyright iriver Limited has all the rights of the patent, trademark, literary property and intellectual property related to this manual. You may not copy or reproduce any part of this manual unless authorized by iriver Limited. You can be punished by using any part of this manual illegally. The software, audio and video which have an intellectual property are protected by copyright and international laws. It is user s responsibilities when he/she reproduce or distribute the contents created by this product. The companies, institutions, products, people and events used in examples are not real data. We don't have any intension to be related with any companies, institutions, products, people and events through this manual and should not draw inferences. Users are responsible for observing the copyrights and intellectual properties. © 1999~2004 iriver Limited, All rights reserved. I Certifications CE, FCC, MIC 6 I 2 Getting started I Getting started Trademarks and Limited Liability I Trademarks Windows, Windows 98 SE, Windows ME, Windows 2000, Windows XP and Windows Media Player are registered trademarks of Microsoft Corp. Note ... I Limited Liability Neither the Manufacturer, importers nor dealers is responsible for any accidental damage including bodily injury or any damage resulting from misuse or unsuitable operation by you. The information on this manual is prepared with the current product specifications. The manufacturer, iriver Limited, is adding new features to the product and may persistently apply new technologies hereafter. All standards may be changed at any time without notice. 7 Getting started Features I 16 Gray Organic EL Display Supporting Multiple Languages N10 series comes with 16 gray OELD which can support multiple languages (40 languages). I Xtreme EQ and Xtreme 3D Customize your own EQ with Xtreme EQ and enhance bass and surround sound with Xtreme 3D. I Necklace with Integrated Earphones I Direct Charging via USB I Firmware Upgrade Provides the latest updated features via firmware upgrade. I Supports 100 folders total and up to 260 files at one time I 6 Preset EQ : Normal, Rock, Jazz, Classic, U Bass, Metal I Voice Recording Voice record level is automatically controlled by AGC function. I Simple navigation makes it easy to find any song 8 I 2 Getting started I Getting started Accessories Accessories subject to change without notice and may vary from image shown. I Main unit I Type A Necklace style earphone I Type B Necklace, cap Hold connection part of necklace and push it into the direction of arrow. Hold the end of strap and pull it out to the direction of arrow to separate the connection part. Put the separated end into the neck strap hole on the player. The connected part will be released. Assemble the earphone in the opposite order after putting the strap in the connection hole of the player. I Earphone Covers I Mini USB Adapter / USB Cable I Installation CD I User Manual/Warranty Card/ Quick Start Guide 9 Getting started Getting started Locating the Controls Actual player may differ slightly from images below. Type A Locating the Controls Actual player may differ slightly from images below. Type B 1 I Front View USB Connection Port 2 I Rear View Cap Eject button 1 I Front View USB Connection Port 2 I Rear View Neck strap Earphone jack Eject button Cap OEL Screen OEL Screen 10 I 2 Getting started I Getting started Getting started Locating the Controls The images below can be different from the product. LCD Display 1 I Left side PLAY / STOP / TURN ON / TURN OFF button Next Track/ Move to the Left button Previous Track/ Move to the Right button 2 I Right side Long : MENU button Short : A-B Repeat Volume ­ / Move to the Down button Volume + / Move to the Up button 1 I MUSIC mode 1 2 3 4 5 7 6 1 2 3 4 5 6 7 8 9 Clock Progress Bar Playback Mode / Status Folder Name Music Title Battery Indicatorr Play Time Volume Level EQ / File Format / Bit Rate / Sample Rate 11 Getting started Getting started LCD Display I File format LCD Display 2 I RECORD mode WMA MP3 IRM ASF IRM (iriver Rights Management) iriver Rights Management is a digital music format. Please visit our web site for details about this music format. [Before Recording] 1 Recording Status 2 Recording Icon 3 Status Bar 4 Number of Files 5 Recording Time 6 Remaining Time [After Recording] 7 Recording Status Bar 8 Recording Folder Name 9 Recording File Name 12 Chapter I Basic Operation I PC Software Installation Connecting to the PC Installation of "New Hardware" Safely Removing the Player from the PC Operate the Software Learning the Basic Function Toolbar Menu File Managing Tools File Menu View Menu Tools 14 17 18 19 20 22 22 23 23 24 24 Windows Help Downloading from the PC Basic Operation Navigation MP3 Voice Recording Menu Setting Deleting File or Folder 25 25 26 27 27 28 29 31 32 3 Basic Functions Basic Operation PC Software Installation Install the software before connecting the player to PC. System Requirements (Windows) Pentium 133Mhz or higher USB port Windows 98 SE/ME/2000/XP CD-ROM drive 10MB of free hard disk space or higher PC Software Installation Install the software before connecting the player to PC. - The software enables you to save MP3 and other format files into your player. - For Microsoft Windows 2000, login as Administrator to install the software. - For Microsoft Windows 2000 user, login as Administrator to install the software. 1 On inserting software installation CD into CD-ROM drive located in PC, the following screen will appear. - IIf the installation program does not automatically run in a few seconds, click My Computer icon to browse the CD-ROM drive and run SETUP.EXE manually. - The software installation CD contains : Device Driver Manager Program for PC Manager Program for Mac 14 I 3 Basic Operation I Basic Operation Basic Operation PC Software Installation Install software before connecting the player to PC. PC Software Installation 1 Insert the installation CD into the CD-ROM drive. Installation starts automatically. 2 Select a language for iriver Music Manager and Click "Next" after selecting the language to install. 3 Click "Next" to install iriver Music Manager. 4 Select a folder to install iriver Music Manager and click [OK]. Select the folder to install. Click "Next" 15 Basic Operation Basic Operation PC Software Installation PC Software Installation 5 Click "Next" to continue the installation. 6 Click "Install" to proceed. 7 Click "Finish" when installation is complete. 16 I 3 Basic Operation I Basic Operation Basic Operation Connecting to the PC Connecting to the PC 1 Push the "PUSH OPEN" on the back of your player to disconnect its cap as shown below. Connect the USB port and PC with USB cable. 2 "USB CONNECTED" will appear on the LCD screen of the player. Connect the USB cable to the PC after playback stops to avoid errors. 17 Basic Operation Basic Operation Installation of "New Hardware" Installation of "New Hardware" 1 After connecting the player to your PC, "Found New Hardware" screen is displayed. 2 Information screen is displayed on the PC. New hardware is installed successfully and ready to use. l New hardware installation process starts after installing iriver Music Manager program. 18 I 3 Basic Operation I Basic Operation Basic Operation Safely Removing the Player from the PC If abnormally removed from PC, the player may be damaged or cause serious malfunction. Safely Removing the Player from the PC 1 Right-click the "Safely Remove Hardware" icon in the taskbar. 2 Select the device to remove and click "Stop". 19 Basic Operation Basic Operation Safely Removing the Player from the PC Operate the Software 3 Click the"OK" after confirming the hardware to remove. 4 Click the "Close" after confirming the Safely Remove Hardware message. (Windows XP) 1 Double click the iriver Music Manager icon. 2 iriver Music Manager version installed is displayed. 20 I 3 Basic Operation I Basic Operation Operate the Software Note ... 3 Initial iriver Music Manager window. The right side of iriver Music Manager will display the contents of the your player. If nothing is displayed in the right screen, please be sure that the player is properly connected to the USB cable and to the PC. It may be necessary to disconnect the player from the cable and reconnect it to activate the right side of iriver Music Manager. 21 Basic Operation - Screen Details Basic Operation - Screen Details Learning the Basic Function 1 2 3 4 5 6 7 8 9 10 11 Wizard Image Viewer Firmware Upgrade File Managing Tools Detail information on selected music Play the selected music with Windows OS preferred player Play selected music file. (Uses system default player). Remaining capacity of the player Turner Setting Format Player iriver Home Page Link Toolbar Menu File Transfer Wizard To transfer files from PC to the player. Audio CD Extracting Wizard To extract the file with OGG format from Audio CD. File Conversion Wizard To convert recorded REC files to a format your PC can use. Firmware Upgrade To upgrade Firmware. N10 does not support Audio CD Extracting Wizard, Image Viewer, and Tuner Setting functions. 22 N10 does not support Audio CD Extracting Wizard, Image Viewer, and Tuner Setting functions. I 3 Basic Operation I Basic Operation - Screen Details Basic Operation - Screen Details File Managing Tools File Menu New Folder To make a new folder on the PC or the player. Delete Search Searches for file(s) or folder(s) within current window. New Folder Makes a new folder. To delete the selected folder or files on the PC or the player. Rename To rename the selected file or folder on the PC. Move to Parent Folder Moves currently selected folder to parent folder. Refresh Refreshes information on file(s) or folder(s) within current window. Properties Displays detail information on currently selected file or folder. Properties To display detailed information about the folder or file selected. Exit To exit the iriver Music Manager. View To change how to display the selected folder. 23 Basic Operation - Screen Details Basic Operation - Screen Details View Menu Tools File Transfer Wizard To transfer files from PC to the player. File Conversion Wizard To convert recorded REC files to a format your PC can use. Upgrade Firmware

To upgrade firmware. N10 does not support CD Extraction Wizard, Image Viewer, and Turner Setting functions. 24 I 3 Basic Operation I Basic Operation - Screen Details Basic Operation - Screen Details Windows Align Horizontally To display the PC and player's windows horizontally. Help About iriver Music Manager To confirm the version of Manager. Align Vertically To display the PC and player's windows vertically. iriver Music Manager Help Opens iriver Manager Help. Firmware Information To see the information about your player. iriver Homepage To connect the iriver homepage. 25 Basic Operation Basic Operation Downloading from the PC Downloading from the PC 1 Select the folders or files on the PC to transfer to the player. Drag and drop to move folders or files to the desired location on the player. 2 Once the music files appear on the right side of iriver Music Manager, they are on your MP3 player. l Files with over 127 characters in the file name will not be transferred. l Files with total path and filename over 512 characters will not be transferred. l The ROOT folder is limited to 1024 files and folders total. Subfolders do not have a limit to the number of files. 26 I 3 Basic Operation I Basic Operation Basic Operation Basic Operation Press and hold Navigation Navigation function allows you to search music. Press and hold 1 I Menu 2 3 Press and hold the MENU button. 1 I Navigation 2 Press and hold the MENU button. Press the / switch to select a mode. - Navi - MP3 - Voice - Setup Push the / switch to select [Navi] and press the MENU button. Press the MENU button to confirm. - MP3 function is selected. 3 I Select folder and file. Press the <+ / - , / > button to move to the folder and file. + : To move up. : To move to the upper folder. - : To move down. : To move to the lower folder. + - 27 Basic Operation Basic Operation Navigation MP3 Press and hold 4 I Playing selected file(s) To select the track, press the PLAY/STOP or button. 1 2 3 Press and hold the MENU button. Push the / switch to select [MP3]. Press the MENU or PLAY/STOP button to play music. 28 I 3 Basic Operation I Basic Operation Basic Operation MP3 Voice Recording 4 Press and hold I Selecting previous/next song Press the / button while playing song. : To select the previous song. : To select the next song. Press and hold 1 2 3 Press and hold the MENU button. 5 I Rewind/Fast-Forward Press and hold the while playing song. / button Push the / switch to select [Voice]. : Rewinds the playing song. : Fast-forwards the playing song. 6 I Adjusting the volume. + : Increases volume : Decreases volume Press the + / - button to control volume. Pres the MENU or PLAY/STOP button to enter the RECORD mode. (The recorder will be in standby mode.) 29 Basic Operation Basic Operation Voice Recording Voice Recording 4 I Recording voice Press the MENU button again to begin recording. 6 I To stop recording Press the MENU button. - After stopping a recording, starting again will create a new voice file. 5 I To pause voice recording Press the PLAY/STOP button to pause recording. - Time indicator will blink to show that recording is paused. Press the PLAY/STOP button again to resume recording. - Pausing the recording will not create a new file, recording will be added to the current recording. 7 I Listening to recorded file Press the button after stopping recording to play the recorded file. 30 I 3 Basic Operation I Basic Operation Menu Setting l The recorded file is saved as VOICE000.REC in the VOICE folder. l If "00:00:00" is displayed, the player's memory is full. Press and hold 1 2 3 Press and hold the MENU button. To record, delete files and/or folders on the player to make some space available. (To delete: Refer to page 32, Deleting File or Folder) l The player cannot record when the memory is full or the battery is low. l Keep the player far away enough from the source to avoid distortion in the recording. l Recorded REC files can be converted to MP3 files using iriver Music Manager. (Refer to page 70) Push the / switch to select [Setup]. Pres the MENU or PLAY/STOP button to enter the SETUP. For more information on Menu Setting, refer to page 40 ~ 42. 31 Basic Operation Basic Operation Deleting File or Folder Deleting File or Folder 1 Press and hold Press the PLAY/STOP button to stop music playback. - You cannot delete the file or folder which is currently playing. 4 5 Press the MENU button. - "FILE DELETE ARE YOU SURE ?" or "FOLDER DELETE ARE YOU SURE ?" is displayed. 2 3 Press and hold the MENU button to display function control. Then, highlight [Navi] and press the MENU button again to display the NAVIGATION SCREEN. Select [YES] using the / button and press the PLAY/STOP button to finish Delete process. 32 Select the folder and file to delete using the + / - or / button. l You cannot delete a file which is currently playing. l Only empty folders can be deleted, delete all files in a folder before deleting that folder. Chapter I Convenient Function I Play Mode A-B Repeat EQ 34 36 36 4 Convenient Function Convenient Function Play Mode Play Mode is set under [Setup] Press and hold