User manual JATON X-MEDIADREAMBOX

X-Media DreamBox X-Media 5.1 DreamBox View High Resolution TV/Video on PC monitor Package Included: þ X-Media DreamBox þ Infra Remote Control þ 2 x `AAA' size Batteries þ 5' VGA Extended Cable þ 5' Audio Extended Cable Thank you for purchasing the X-media DreamBox / X-Media5.1 DreamBox (Model 5.1)! With this X-media DreamBox or Model 5.1, you can turn your RGB monitor or LCD display panel into a TV with or without even having to turn on your computer. Just plug it into your monitor or LCD display and you're ready to watch TV, DVD, RCA programs, or play video games. X-media DreamBox, or Model 5.1 is completely plug-n-play. This is no software driver required. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. If not installed and used in accordance with the instructions, this equipment may causes corrupt interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause equivocal interference to radio or telephone reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the TV antenna if there is any. - Increase the separation between the equipment and Telephone reception. - Connect the equipment into an outlet on a circuit different from that to which the radio receiver is connected. - Consult the dealer or an experienced radio/Telephone technician for help. About operating voltage Operate the unit with the appropriated on the outer packaging and About installation Do not place the unit near heat sources, rain, moisture or mechanical shock, and ensure that there is nothing to interfere with proper ventilation/airflow. IMPORTANT SAFETY INSTRUCTION 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. WELCOME!.........................................................................................................2 CAUTION...........................................................................................................2 ABOUT OPERATING VOLTAGE .......................................................................2 ABOUT INSTALLATION ...................................................................................3 IMPORTANT SAFETY INSTRUCTION..................................................... 3 FEATURES:...................................................................................................... 6 SPECIFICATION............................................................................................. 7 BOX UNIT [F]................................................................................................... 8 BOX UNIT [R].................................................................................................. 9 BASIC CONNECTION.................................................................................11 OPTIONAL CONNECTION........................................................................12 REMOTE CONTROL...................................................................................17 OSD MENU.....................................................................................................18 VIDEO 1.............................................................................................................18 VIDEO 2.............................................................................................................18 AUDIO...............................................................................................................20 CLOCK...............................................................................................................21 SETUP ...............................................................................................................22 SVGA.................................................................................................................23 TV......................................................................................................................24 PANEL CONTROL.......................................................................................25 TROUBLESHOOTING.................................................................................25 LIMITED NINETY (90) DAY WARRANTY....................................................32 LIMITED ONE (1) YEAR WARRANTY...........................................................32 RENTAL UNITS................................................................................................33 COMMERCIAL UNITS......................................................................................33 REGISTER PRODUCT .......................................................................................33 YOUR RESPONSIBILITY..................................................................................33 IMPORTANT: PACKING AND SHIPPING INSTRUCTION................35 · · · · · · · · · · · · · · · Watch TV or Video without Turning on your computer Compatible with all VGA, LCD, and Mac monitors Plug-n-Play! No software drivers required Play your favorite games with consoles like Nintendo®, Sega ®, DreamcastTM and Play Station 2®, X-Box ®, etc. Full screen, or size-selectable windows display on monitor Easily switch to TV, Video or PC display Full functional infrared Remote Control Built-in Touch Button Control Panel Auto-scan, to memorized all active TV channels line up in your area Support 125 Channels On-Screen Display (OSD) Menu Sleep/Alarm/Timer Setup function Brightness/Contrast/Hue/Color/Saturation adjustment Available interpretation in NTSC or PAL Supports 640x480@60Hz, 640x480@72Hz, 800x600@60Hz, 1024x768@60Hz resolution and refresh rate for video output Imagine turning your regular PC into the best multimedia entertainment system! X-media DreamBox uses the latest DeInterlacing method, which delivers superior image and picture quality. X-media DreamBox not only allows you to watch TV or video, but also comes with input connectors to hook up with a VCR for playing video tape. In addition, the AV, S-Video and RCA input allow you to connect with a Nintendo, Sega, Dreamcast or Play Station 2 for the exciting video games for your computer. during your most busies working hour. Other unique features including support up to 1024x768 display resolution, multi-lingual onscreen display (OSD), sleep timer functions, and more. Box unit, and Remote Control Your Package may also contain other printed material with special offers for direct purchase of related products as well. Specification Physical Dimension: Width = 8 ¬", Height = 2 ¬", Depth = 6" (Box only) TV Program Source: n n Input Video Source: n TV Antenna (75) Cable TV (Coaxial) Video Camcorder Input Audio Source: Video Output: - PC Sound Card VGA out (DB 15) - Output: · · RGB Monitor Analog LCD Monitor AC Adapter (Model 5.1): AC-120V, 60Hz / DC - 12V 1A (Class 2 Transformer) AC Adapter: AC-120V, 60Hz / DC - 12V 1.2A (Class 2 Transformer) Audio Output: - Speakers (with Amplifier built-in) (Not included) Video Signaling: NTSC / PAL NTSC (Default setting) TV Signaling: NTSC (Model # 91007N) PAL (Model # 91007P) Note: All dimensions are Inches, otherwise may specified. Feature and specification are subject to change without notices. Front Side Box Unit [F] The touch button panel on the front side of the Xmedia DreamBox provides quick access to commonly used functions. · Power - Turn the unit on / off · · Volume - Audio level Adjustment Channel - TV / CATV channel switch If your remote control doesn't function at all, then these buttons on Box front panel will acting as a keypad for your screen menu, see the details on chapter in this document. Rear Side Box Unit [R] All ports allow you to connect differential sources IN/OUT for the TV / Video programs, then turnover VGA Out to your monitor (s). (describe from left to right on bottom raw) · · · · · DC Plug - DC power from the AC Adapter. Audio In - Audio source from PC sound card (Optional Connection). Audio Out - Audio output to speaker (s). VGA In - Port for PC video from your computer (Optional Connection). VGA Out - Port for all videos out to your monitor (s). Red for right channel on audio (Optional connection). AV1_L - Analog Video Composite Input in colored White for left channel audio (Optional connection). · AV1_Video - Analog Video Composite Input in colored Yellow for video signal (Optional connection). · TV ANT / CABLE - port for TV Antenna or CABLE TV (CATV) signal input. Optional Features on Model 5.1 (describe from left to right on top raw) · G9 CS 5.1out - An Audio out from G9Pin connector to CS 5.1 channel speaker system or decoder. · Audio Switch - Switching Audio modes between Cinema and Movie. · COMPONENT VIDEO - Analog Video Component input from Component Video equipment such as DVD player component video-out, Video Conference controller. (If you have loss signal on UHF/VHF/FM, you may use signal amplifier to boost receiving "F" type signal in clear levels. Signal amplifier is sold separately, and it is available in most TV/Radio stores.) · R IN OUT L Video DC 12V/1A Audio VGA IN VGA OUT S_Video AV1 TV ANT / CABLE Rear Side Diagram. Movie G9 IN OUT COMPONENT VIDEO-IN R L Video DC 12V/1A Audio VGA IN VGA OUT S_Video AV1 TV ANT / CABLE Model 5.1 Rear Side Diagram. Basic Connection Unit The basic connection only plug your monitor to the VGA out port, plug Audio out to your speaker(s) and then connect AC / DC adapter from AC outlet to DC port on this unit. Either TV Antenna or Cable TV connector should plugged to the unit before you turn the power on. Monitor R IN OUT L Video CABLE TV DC 12V/1A Audio VGA IN VGA OUT S_Video AV1 TV ANT / CABLE ~ ~ ~ ~ AC Outlet a single display for your TV or CATV program. Both RGB and LCD can display in full screen. FRONT RIGHT CENTE R FRONT LEFT SURROUND RIGHT SoundMax 5.1 SURROND LEFT Jaton DVD Player Surround Stereo Optical Y Cr Cb L L Video Out S-Video I Center ! R R SPDIF Y CS 5.1 out Cinema Cr Cb Music G9 IN OUT COMPONENT VIDEO -IN R L Video CABLE TV DC 12V/1A Audio VGA IN VGA OUT S_Video AV1 TV ANT / CABLE AC Outlet Monitor There is no different on the basic connection between the two models, simply TV-to-Monitor, but the model 5.1 added more optional connections for features on leading technology. Optional Connection Unit Certainly, you can plugged all kinds differential I/O into this unit to performing more video / audio action accomplishment than just watch TV on your monitor. In advanced connections, all ports on front and rear sides are optional and available for your game console, camcorder, DVD video player, also you can simultaneously working with your computer and have another video CRT monitor Analog LCD Display STOP REW. VOLUME -MICPAUSE OPEN / CLOSE F.F. POWER VOLUME DVD Player PS 2 All video sources you can connect to S_Video or RCA ports. VCR Your PC Video Camcorder Optional Connection Optional Connection R IN OUT L Video DC 12V/1A Audio VGA IN VGA OUT S_Video AV1 TV ANT / CABLE Optional connection as shown as above, which gives you more ideas to add more video sources to this unit, and there is no doubt about this unit capable of handling all of those functions as well. This is a Plug-n-Play unit without any software not even the Microsoft windows. Receiver with 5.1 ch. Input DVD Player Component Video-out Video Conference Equipment Y CS 5.1 out Cinema Cr Cb Movie G9 IN OUT COMPONENT VIDEO-IN R L Video DC 12V/1A Audio VGA IN VGA OUT S_Video AV1 TV ANT / CABLE STOP REW. PAUSE VOLUME -MICOPEN / CLOSE F.F. POWER VOLUME DVD Player VCR Video Camcorder PS 2 Your PC The Component Video Input at rear side will share the VIDEO of AV2 port in same implement circuitry, that means you only can plug-in each port on one time. Accurately the same procedure on PC - VGA out Monitor Your PC PC - Speaker out SOUND CARD JP2 CD-IN GR G L JP3 R G Video AUX PHONE R G MON G O L JP10 JP9 JP11 PC SPK JP1 1 JP8 G L AMP Connection Diagram - 1. JP7 R IN OUT L Video DC 12V/1A Audio VGA IN VGA OUT S_Video AV1 TV ANT / CABLE S_Video out / Video out from these video sources STOP POWER VOLUME VOLUME -MICREW. F.F. PAUSE OPEN / CLOSE PS 2 VCR DVD Player Video Camcorder PC - VGA out Monitor Your PC Line In R VIDEO TAD 1 PC SPK J P 1 AUX 1 AUX VIDEO 1 G L TAD L G G G R PANASONIC 1 SONY 1 R IN 1 GAME 1 L Video OUT DC 12V/1A Audio VGA IN VGA OUT S_Video AV1 TV ANT / CABLE Multiple Channel Sound Card (Surround Sound System with Mixer Subwoofer) S_Video out / Video out from these video sources STOP The first connection it described above, the audio out is straight from the source to speaker even without turn on your PC, there are two channels in stereo. If your connection as second diagram illustrated above for surround sound output, then your PC must be turned on to keeping the multiple channels sound card activate for operation. AV2 ports at front side on this unit are the optional connections for you playing video programs on tap from VCR/Camcorder to your PC monitor, also adapted for Game console input. Composite Video Out From These Video Sources PS 2 VCR Camcorder Game Console · · · Colored Red Jack - Audio right channel. Colored White Jack - Audio left channel. Colored Yellow Jack - Video channel. PC: Switch between PC and last Video CH VIDEO: Main Video CH select MENU: OSD Setup MENU UP PIP ADJUST VIDEO PC MUTE POWER POWER: Video power MUTE: Muting PIP ADJUST: Manul adjust PIP size and position UP: OSD cursor up RETURN: Menu select RETURN LEFT: '<-' or '-' DISPLAY: CC on / Show status DOWN DISPLAY HELP RIGHT: '->' or '+' HELP: Remote control online help DOWN: OSD cursor down 0-9: TV CH input JUMP: Back to last CH ALARM: ON /OFF Alarm SLEEP: Sleep (0, 15, 30, 60, 90, 120 Min.) AUDIO: Audio CH select 1 4 7 JUMP 2 5 8 0 3 6 9 ENTER + CH CH +: Next channel CH -: Last channel VOL +: Volume increase VOL -: Volume decrease ENTER: Enter TV CH PIP: PIP ON / OFF MTS/SAP: SAP/steror/Mono SEL: PIP input video select + VOL PIP SLEEP ALARM MTS/SAP AUDIO SIZE POS SEL SIZE: Change PIP size (1/4, 1/3, 1/2, Manual) Jaton POS: Change PIP position (Right bottom/left bottom/ Left top/Right top/Manual) Definition: OSD PIP CH POS SEL On Screen Display (screen menu) Picture-In-PC (Video overlay top on your PC video) Channel of Audio / Video Position Select Before you ready to setup OSD menu, make sure you have powerup this unit and other devices you wish to use with. Of course, your monitor must be turn on. Press "Menu" key: use "up" & "down" for pull-down-list items selected, "left" and "right" key will loop on top bar menu selecting from left to right, all items selecting by highlight in blue color. Video 1 < Top Bar Menu > VIDEO 1 2 AUDIO CLOCK SETUP SVGA TV Video Color / Display Setting RED GREEN < press on left or right key to adjust value, or turn ON/ OFF on specific function in each pull down item. BLUE BRIGHTNESS CONTRAST SATURATION HUE ->, <- up, down: Select / Adjust Menu: Exit The remote control must be pointing to the unit box, not to your monitor if they were in separate places. VIDEO 1 2 AUDIO CLOCK SETUP SVGA TV Advanced Video Setting Y/C DTFNR < 0-7 LOW / MID / HIGH / OFF ON / OFF ON / OFF ON / OFF ON / OFF 4x3 / 16x9 NTSC / PAL (4x3 - Default) (NTSC - Default) (0 - Default) (LOW - Default) GAMMA DCTI DLTI MDETECT ASPEC RATIO SIGNAL TYPE press on left or right key to adjust value, or turn ON/ OFF on specific function in each pull down item. ->, <- up, down: Select / Adjust Menu: Exit · · · · · Y/C - V-size / Center screen Adjustment DTFNR - Dynamic Temporal frame-Filtering Noise Reduction DCTI - Dynamic Chrominance Transience Improvement DLTI - Dynamic Luminance Transience Improvement MDETECT - Motion Detection < Top Bar Menu > VIDEO 1 2 AUDIO CLOCK SETUP SVGA TV Audio Setting VOLUME BASS < press on left or right key to adjust value, or turn ON/ OFF on specific function in each pull down item. TREBLE LOUDNESS MUTE ON / OFF (OFF - Default) ->, <- up, down: Select / Adjust Menu: Exit < Top Bar Menu > VIDEO 1 2 AUDIO CLOCK SETUP SVGA TV Clock / Alarm Setting SLEEP MODE SET TIME < OFF / 15 Min. / 30 Min. / 60 Min. / 90 Min. / 120 Min. 00:00 00:00 1 - 125 ( Selectable on AM or PM) ( Selectable on AM or PM) ( Number of your TV or CATV Channel) press on left or right key to adjust value, or turn ON/ OFF on specific function in each pull down item. SET ALARM ALARM SOURCE ALARM TIMER ON / 10 Min. / 30 Min. / 60 Min. / OFF ->, <- up, down: Select / Adjust Menu: Exit < Top Bar Menu > VIDEO 1 2 AUDIO CLOCK SETUP SVGA TV OSD Language and Reset to Default LANGUAGE SET CC < ENGLISH / CHINESE CC OFF / CC 1 / CC 2 / CC 3 / CC 4 640x480x60Hz / 640x480x72Hz / 800x600x60Hz / 1024x768x60Hz RESET RESET > (OK) > (OK) (Press " Menu" back to default) (Press "Menu" back to default) (Composite is default) press on left or right key to adjust value, or turn ON/ OFF on specific function in each pull down item. OUTPUT MODE VIDEO SETTING AUDIO SETTING VIDEO 2 INPUT COMPOSITE / COMPONENT This selectable option is only shown on the Model 5.1 ->, <- up, down: Select / Adjust Menu: Exit · · · · · CC - Closed Caption CC 1 - Caption in 1st position CC 2 - Caption in 2nd position, and so on. OUTPUT MODE - Full screen display resolution 640x480x60Hz (Default) 640x480x72Hz (Not recommended for TV mode) 800x600x60Hz 1024x768x60Hz VIDEO 2 INPUT - An optional Analog input for Component/Composite video resource. Default setting is composite. < Top Bar Menu > VIDEO 1 2 AUDIO CLOCK SETUP SVGA TV SVGA / PIP SETTING PIP FINE PICTURE PIP BORDER < 0 - FF ON / OFF TV / AV1 / SVIDEO / AV2 LEFTBOTTOM / RIGHTBOTTOM / LEFTTOP / RIGHTTOP MEDIUM / SMALL / LARGE > (OK) (Use left & right key to change value) press on left or right key to adjust value, or turn ON/ OFF on specific function in each pull down item. PIP SELECT PIP POSITION PIP SIZE ADJUST RESET SETTING ->, <- up, down: Select / Adjust Menu: Exit A value of numeric or/and character combination will automatically shown on your "PIP FINE PICTURE" pull down list (the range from 0 to FF, 165 combinations between). Default value on that aggregation depends on the type of VGA adapter in your PC, and type of monitor you have plugged. Adjustment may increasing (right key) or decreasing (left key) ranges on 5 times either way to tuning for finest setting with refresh rate and frequency consumption in that PIP. Usually, the default setting on that selection makes finest choice. Recommended Refresh Rate and Resolution for VGA card setting. Resolution (Pixel) Refresh Rate (Hz) 640 x 480 60, 72, 75 800 x 600 60, 72, 75 < Top Bar Menu > VIDEO 1 2 AUDIO CLOCK SETUP SVGA TV ADVANCED TV SETTING CATV AUTO PROGRAM < ON / OFF OFF > (If this function is on, all TV channels are scanned.) STEREO / SAP / MONO press on left or right key to adjust value, or turn ON/ OFF on specific function in each pull down item. MTS CH ADD CH ERASE 3 3 > (OK) (You may use 0-9 key to add new TV channel.) > (OK) (You may use 0-9 key to erase TV channel.) ->, <- up, down: Select / Adjust Menu: Exit Panel Control Front Side Key Map There is another way to display OSD Menu on your monitor without the Remote Control (If you temperately loss it, or low on battery). POWER: ON/OFF VIDEO: AV 1 AV 2 S_VIDEO TV PC Up key Right Key Left key Down key Both bottom press on sametime = Menu Key Turn on your monitor, then press "Power" button on this unit (If power LED was orange). Use both "Volume" up & down buttons to brings-up OSD menu to your monitor, if the image screen doesn't clear then you may use "Video" button to switch the mode you are expecting so. TROUBLESHOOTING If power button doesn't brings the power up to this unit, try to unplug the AC/DC adapter from AC outlet then plug again, and make sure that outlet is actives. TV/Video-Sync positioning may not centering for all differential type of CRT monitors or Analog LCD display panels from a variety of the market, manually to make adjustment on V-sync or H-sync of your screen that will helps you for the best of view. Customer Service at (408) 934-9369 Glossary Automatic Gain Control (AGC) Definition AGC is a circuit designed to boost the amplitude of a signal to provide adequate levels of recording. Aspect Ratio The width to height ratio of an image. A 4:3 aspect ratio means the horizontal side is a third wider than the vertical size. Standard television ratio is 4:3 (or 1.33:1). Wide-screen DTV and HDTV aspect ratio is 16:9 (or 1.78:1). Alpha Blending This is the way of combing two images by blending together at factor of alpha. Alpha denotes the blending factor. Caption A textural representation of the audio information in a video program. Captions are usually intended for the hearing impaired, and therefore include additional text to identify the person speaking, off screen sounds, etc. Chroma The color component of a video signal, independent of the luma. Chrominance The color component (hue and saturation) of light independent of luminance. Technically, Chrominance refers to the linear component of video, as opposed to the transformed non-linear modes. Common film aspect ratios are 1.85:1 and 2.35:1. Sometimes referred to as Theater modes. Closed Caption Text caption for video which are not normally visible, as opposed to open caption, which are a permanent part of the picture. In the United States, the official NTSC Closed Caption standard requires that all TVs larger than 13" include circuitry to decode and display caption information stored on the line 21 of the video signal. Component Video A video system containing three separate color component signals, either Red/Green/Blue (RGB) or Chroma/color differences (YCbCr, YPbPr, YUV), in analog or digital form. Composite Video A analog video signal in which the luma and chroma components are combined (by frequency multiplexing), along with sync and burst. Also called CVBS. Dynamic Luminance Transience Improvement It is a content adaptive horizontal peaking for the luma signal to improve the visual quality of TV picture. Dynamic Chrominance Transience Improvement Assuming luma and chroma transitions are normally aligned, the chroma transition are usually degraded due to narrow bandwidth of chroma information. By monitoring coincident luma transient, a faster edge is synthesized for the chroma transitions. This edge then is aligned with the luma edge. Dynamic Scan Velocity Modulation (DSVM) DSVM constantly monitoring the edge information of the picture edges in the picture. Dynamic Digital Comb Filter (DDCF) The adaptive comb filter is used for high quality Y/C separation for both PAL and NTSC signals. The adaptive comb filter can improve luma resolution and reduces cross talk between luma and chroma. Dynamic Adaptive Static Detect De-interlacing Improves the clarity and sharpness of the overall picture by enhances the "non-moving" portions of the picture by doubling the resolution of those areas. This unique feature is enabled by utilizing Trident's proprietary technology. Dynamic Temporal frame-Filtering Noise Reduction The motion adaptive non-linear Infinite Impulse Response (IIR) filter is used to reduce the luminance noise. The amount of noise reduction is controlled by the motion picture which remove the tailing effect when there is motion in the picture. Digital Television (DTV) In general, any system that encodes video and audio in digital form. In specific, the Digital Television System proposed by the ATSC or the digital TV standard proposed by the Digital TV Team founded by Microsoft, Intel and Compaq. Dynamic Gamma Control It is the same as Dynamic Brightness/Contrast Adjustment. Dynamic Black Level eXtender (DBLX) The DBLX extends gray to black level to improve the contrast of the TV picture. Dynamic Brightness/Contrast Adjustment To remove the high frequency noise in TV picture. Dynamic Frame/Scan Rate Converter The DPTV can convert input TV signal to any refresh rate. For example, it can convert from 50Hz PAL timing to 75Hz noninterlaced output or from 50Hz timing to 100Hz interfaced output. Dynamic White Peak Level Restriction Dynamically limits white level of image. Dynamic Skin Color Correction Depending on picture content, the DPTV will dynamically change the gain of U and V channels to make colors on picture more vivid. Dynamic Digital SVGA Overlay The DPTV can capture SVGA RGB data into frame buffer. It can be scaled to any size and overlay with TV picture. Gamma Correction The characteristics of the displays using phosphors (as well as some cameras) are non-linear. A small change in voltage when the voltage level is low, produces a change in output display brightness. The same small voltage change at high voltage level will not produce the same magnitude in output brightness. This effect or the difference between what you should have and what you actually measured is known as gamma. Gamma correction is to process RGB signals to compensate for the gamma of display. High-Definition Television (HDTV) A video format with a resolution approximately twice that of the conventional television in both the horizontal and vertical dimensions, and a picture aspect ratio of 16:9. Used loosely to refer to the US DTV system. picture from a standard video signal by using techniques such as frame doubling, line doubling, and digital signal processing. Interlaced A video scanning system in which alternating lines are transmitted, so that half a picture is displayed each time the scan beam moves down the screen. An interlaced frame is made of two fields. Luma The brightness component of a color video image (also called the grayscale, monochrome, or black-and-white component). Nonlinear luminance. Luminance Loosely, the sum of RGB tristimulus values corresponding to brightness. May refer to a linear or non-linear signal. Moving Pictures Expert Group (MPEG) An international committee that developed the MPEG family of audio and video compression systems. On-Screen Display (OSD). OSD is a means of displaying system status by overlaying the information over the picture on the viewing screen directly. Users can choose to implement text-based or Graphical based OSD Panorama A video image that uses non-linear distortion to stretch the sides more and the center less, thus minimizing the apparent distortion. This feature is found on some wide-screen television. Picture-Outside-Picture (POP) source in a small window superimposed in a corner of the screen. Programmable Zoom Viewer TV picture can be scaled up or down with any factor. Progressive Scan A video scanning system that displays all lines of a frame in one pass. Contrast with interlaced scan. Standard Definition Television (SDTV) A term applied to traditional 4:3 television (in digital or analog form) with a resolution of about 700x480 (about 1/3 megapixel). S-Video A video interface standard that carries separate luma and chroma signals, usually on a four-pin mini-DIN connector. Also called Y/C. The quality of s-video is significantly better than composite video since it does not require a comb filter to separate the signals, but it is not quite as good as component video. Most high-end televisions have s-video inputs. Sequential color with memory (SECAM) A composite color standard similar to PAL, now currently used only as a transmission standard in France and a few other countries. Video is produced using the 625/50 PAL standard and is then transcoded to SECAM by the player or transmitter. Tristimulus A three-valued signal that can match nearly all colors of the visible light in human vision. This is possible because of the three types of photoreceptors in the eye. Vertical Blanking Interval (VBI) auxiliary information such as closed caption. Widescreen TV A video image wider than the standard 4:3 aspect ratio. When referring to DVD or HDTV, wide-screen usually implies a 16:9 aspect ratio. Limited Warranty. These limited warranties extend to original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee. Limited Ninety (90) Day Warranty JATON warrant this product against defects in materials or workmanship for a period of ninety (90) days after the date of original retail purchase. During this period, JATON will repair or replace a defective product or part, at their option, with a new or refurbished product or part without charge to you. You must deliver the entire product to JATON or a JATON Authorized Service Station. You are responsible for all transportation and insurance charges for the unit to and from the Authorized Service Station. Limited One (1) Year Warranty JATON further warrant the parts in this product against defects in materials or workmanship for a period of one (1) year after the date of original retail purchase. During this period, JATON will repair or replace a defective product or part, at their option, with a new or refurbished product or part without charge to you, except that if a defective part is replaced after ninety (90) days from the date of the are responsible for all transportation and insurance charges for the unit to and from the Authorized Service Station. Rental Units The warranty for rental units begin with the first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. Commercial Units Products sold and used for commercial use have a limited ninety (90) day warranty for all parts and labor. Register Product You should read the owner's manual thoroughly before operating this product. You should complete and mail the enclosed Registration card within thirty (30) days after you, or the person who has given you this product as a gift, purchased this product. This is one way to enable JATON to provide you with better customer service and improved products. Failure to return the card will not affect your rights under this warranty. Your Responsibility The above warranties are subject to the following conditions: 3. 4. 5. 6. 7. Station within thirty (30) days after you discover a defective product or part. All warranty servicing of this product must be made by JATON or a JATON Authorized Service Station. JATON warranties are effective only if the product is purchased and operated in the same continent territorial regions. Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility. Warranties extend only to defects in materials or workmanship as limited above and do not extend to any product or parts which have been lost or discarded by you or to damage to products or parts caused by misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power, improper installation, improper maintenance or use in violation of instructions furnished by us; or to units which have been altered or modified without authorization of JATON or to damage to products or part thereof which have had the serial number removed, altered, defaced or rendered illegible. Physically damaged this unit, or remote control is not acceptable for repair or exchange whether in or out of warranty and will be returned as received. All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of JATON arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising under state law. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you. IMPORTANT: PACKING AND SHIPPING INSTRUCTION When you return the merchandise back to a JATON Service Station, you must enclosure and pack the product's original carton box with return goods inside a legal shipping material, Do Not use Jaton product carton box for your shipping box. Serial Number - ten or eleven digit code, the serial number consists of the following parts: Packaging Type Manufactured Date Code Production Numerical Code A 00 8 000015 Year Month XXXXX-XXX-XX S/N: A008000015 xxxx/xxxx 00.0 XXXX XX XXXXXX Product Label and Manufactured Date Code