The DSC 1000 Controller is shown here. ® DIGITAL SIMPLY CINEMA DSC 1000 OWNER'S GUIDE TABLE OF CONTENTS Introduction Welcome Important Safeguards and Precautions Front Panel Controls Front Panel Display Rear Panel Connections Remote Control Basic Information About This Manual Compatible with CD as well as DVD Regional Coding Inserting Batteries into the Remote Control DSC System Connection Connecting the Controller to the Subwoofer Connecting the Controller to the Satellites Antenna Connections TV, Audio and Power Connections Connecting the TV and optional components Connecting AC Power Page 1 2 3 4 5 6 8 8 8 8 8 Page 9 9 10 11 11 11 Test Screen Test Screen TV Picture Adjustment with Test Screen Player Menu Using the Status Bar Menu Player Menu Information Displays Programmed Play Radio Menu Rearranging the station list Selecting presets Removing presets RDS Station ID Surround Mode for Tuner TV Menu, AUX Menu, Digital In Menu TV Menu AUX Menu Digital Menu Surround Mode Chart DVD Languages Codes Languages Codes Troubleshooting Troubleshooting Glossary Glossary Specifications Specifications Page 17 17 Page 18 18 18 18 Page 19 19 19 20 20 Page 21 21 21 22 Page 23 Page 24 Page 26 Page 27 Declaration of Conformity Playback Basics Page Basic Playback 12 Disc Playback Features 12 Skipping tracks or titles/chapters 12 Fast Motion Playback/Fast Search 12 Freeze Frame and Frame Advance (with DVD only) 12 Slow Motion Playback (with DVD only) 12 Surround Mode 13 System Setup System Defaults Setup Menu System Settings Display Language Preferred Subtitle Language Panel Time-Out Status Bar Time-Out Parental Control PBC Support Screen Saver Show Angle Icon Audio Settings Preferred Audio Language Dynamic Range Audio Adjustment Delay Unit Tone Control Bass Level Treble Level DVD Sound Mode Audio Adjustment Delay Output Level Adjustment Video Settings Video Adjustment Page 14 14 14 14 14 14 14 14 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 16 16 We, Harman Consumer Group International 2, route de Tours 72500 Château-du-Loir France declare in own responsibility, that the product described in this owner's manual is in compliance with technical standards: EN 50081-1:1992 EN 50082-1:1992 EN 60065-1:1998 EN 50013/A14:1999 EN 50020/A14:1999 EN 55022:1998 EN 61000-3-2/A14:2000 EN 61000-3-3/1:1995 Gary Mardell JBL, Harman Consumer Group International France, 07/04 And thank you for purchasing this JBL Digital Simply Cinema system. This state of the art system includes everything you need to experience movie theater quality digital video and audio in the comfort of your own living room. The only thing you need to add is your own TV. We have designed this system to be easy to set up, and even easier to use. But please review this manual before you operate your system. Have it handy while you are setting the system up and keep it available for future reference or in the unlikely event that you encounter any unexpected problems. We have tried to keep this manual as simple as possible. It begins with a description of the important controls on the main unit and the remote. It then explains how to connect the speakers, your TV, and optional external sources to the main unit and then how to operate the DVD-Audio/DVD/CD player and the FM Stereo Receiver. IMPORTANT NOTES: This manual should be read in conjunction with the owners manual of the accompanying loudspeaker system. The instructions found therein should be followed with respect to loudspeaker operation and safety. Only use the DSC1000 controller with the loudspeaker system supplied. Failure to do so may cause damage to either the controller or the loudspeakers and will invalidate any warranty. All of the optional system settings have been preset at our factory for correct operation of the system. All you have to do is insert a disc, sit back, and enjoy a great home theater experience. You may want to change some of the optional settings. A description of all the optional settings and instructions for changing them are found in the second half of the manual. This system was designed to provide you with many years of reliable operation with a minimum of care and maintenance. Every component in your system was in perfect working condition when it left our factory. If you experience any problems with the set-up or operation of this system, please review the Troubleshooting Guide at the end of this manual before you contact your authorized JBL dealer. The serial number of your system can be found on a label on the back panel of the main unit, and also on the display carton. Please record the serial number in the space below. You may need to refer to this number if your system ever needs to be serviced or for insurance purposes. Model no.: DSC 1000 Serial No.: ___________________ Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified service personnel only. The AC cord must only be changed at qualified service facility. · This appliance is classified as a CLASS 1 LASER product. · The CLASS 1 LASER PRODUCT MARKING is located on the rear panel. · This product contains a low power laser device. To ensure continued safety, do not remove any cover or attempt to gain access to the inside of the product. Caution Refer servicing to qualified service personnel only. The following marking is printed on the rear panel. 1 ENGLISH WELCOME IMPORTANT SAFEGUARDS AND PRECAUTIONS Noise Interference on the TV While a Broadcast is Being Received Depending on the reception condition of the TV, interference may appear on the TV monitor while you watch a TV broadcast and the controller is left on. This is not a malfunction of the controller or the TV. To watch a TV broadcast, turn off the controller. ENGLISH Copy protection This DVD player supports Macrovision copy protection. On DVD discs that include a copy protection code, if the contents of the DVD disc are copied using a VCR, the copy protection code prevents the videotape copy from playing normally. Unpacking Check that you have the following items: · DSC 1000 Controller (1) · SCS 200.5/230 Loudspeaker System · Remote control (1) · AAA batteries (2) · SCART A/V cable · Left/Center/Right/Front speaker cables (3x5 meter) · Surround speaker cables (2x12 meter) · FM antenna (1) · Owner's Manual (1) For Optimum Performance The controller is a precision device that is constructed using extremely accurate technology. Soiling or friction affecting the pickup lens or disc drive can impair the image quality. In the worst case, neither video nor audio will be played back. To obtain optimum picture quality, the player should be checked (cleaning and replacement of some parts) every 1,000 hours. Note that this period varies depending on the environment (temperature, humidity, dust) in which the player is used. Do not attempt to clean the pickup lens yourself. Service · Do not attempt to service the controller or subwoofer yourself. · Please contact your authorized JBL dealer. IMPORTANT NOTE: Do NOT use the speaker cable pack supplied with the loudspeaker system to connect the DSC 1000 Controller. Only use that supplied with the controller. Copyright Audio-visual material may consist of copyright works which must not be recorded without the permission of the owner of the copyright. Please refer to relevant laws covering copyright protection. 2 7 6 A 9 0 1 84523 B 0 POWER ON/OFF (Standby): Press the button once to place the system in standby, press again to turn the system off. Press the ON button on the remote control to switch the unit from standby to on. 1 Disc Tray. Place a disc on the tray. 2 W PREV. While playing a disc, press this button to select the previous title, chapter or track. 3 X NEXT. While playing a disc, press this button to select the next title, chapter or track. 4 A STOP. Stop playing a disc. 5 G PLAY. Play a disc. 6 REMOTE SENSOR. Receives the remote control signals. 7 Front Panel Display. Indicate the playing time, etc. 8 OPEN/CLOSE. Open or close the disc tray. 9 POWER LED. Power On: ring lights blue Standby: ring lights orange A VOLUME. Increase or decrease the master volume level. B SOURCE. Select the component you want to use. 3 ENGLISH FRONT PANEL CONTROLS FRONT PANEL DISPLAY ENGLISH 1 C 2 4 A 56 3 7E 8 BF TEST 0 9 1 0 Source Indicators: These indicators will light to show which source is currently selected. 1 Status Bar. Shows operating information, such as "OPEN", "CLOSE"and "LOADING", etc. Shows the type of disc playing: DVD, CD and MP3, etc. Shows track and time information of the CD or MP3 disc. Shows the tuner band and frequency. 2 DVD-Audio Indicator: Illuminates when a DVD-Audio section of a DVDAudio disc is playing. 3 Repeat Indicators: These indicators light when any of the Repeat functions are in use. 4 5.1ch Indicator: Lights when a 5.1 channel track is being played. 5 Random Indicator: This indicator lights when Random has been selected as playback mode. 6 PBC support: This indicator will light to show that Play Back Control (for VCD) is active. 7 V.OFF Indicator: Illuminates when the video signal has been turned off for better audio quality. 8 Progressive Scan Indicator: This indicator will light when the progressive scan video output has been selected. 9 Playback-Mode Indicators: These indicators light to show the current playback mode. A Program Indicator: This indicator lights when playing back the programmed playlist. B Parental Lock Indicator: This indicator lights when the parental-lock system is engaged in order to prevent anyone from changing the rating level without a code. C DISC TYPE Indicator: This indicator shows what disc type is currently playing. D ANGLE Indicator: This indicator blinks when alternative viewing angles are available on the DVD currently playing. E A-B Repeat Indicator: This indicator lights when a specific passage for repeat playback has been selected. F Test Indicator: This indicator lights when the TV test screen is activated. 4 8 5 1 B 7 A 9 2 3 6 0 4 0 Component Video Outputs: Connect to the component video inputs of your compatible video device. 1 FM Antenna. Connect to the supplied FM antenna. 2 Audio Out. Optional connection to a TV set or external audio system (also for recording devices). 3 Audio In. Connect to a line-level analog audio source: TV, tape player, Minidisc, PC, etc. 4 SCART In/Out. Connect to a TV SCART input. (SCART cable included.) 5 Video Out. Connect to a TV video input. (Composite video cable not included). 6 S-Video Out. Connect to a TV S-Video input. (S-Video cable not included). 7 Subwoofer Output. Connect to the SUB/LFE input on the subwoofer. 8 AC Power Cord. Connect to a 230V wall outlet. 9 Coaxial Digital Input: Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to these jacks. A Optical Digital Input: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to these jacks. B Speaker Outputs: Connect the colored plug at the end of the speaker cables to the output of the corresponding loudspeaker, marked with the same color. 5 ENGLISH REAR PANEL CONNECTIONS REMOTE CONTROL 0 ON: Turns on the player when it is ENGLISH in standby mode. 1 OFF: Turns off the player to standby mode. 2 SUBTITLE: When a DVD is playing, press to select a subtitle language or to turn subtitles off. 3 TITLE: When a disc is playing, press to show the number of the title currently played. Press TITLE again to jump to the subsequent title (with the next title number) on the disc. Note that this function works (most times) even if title jump is prohibited by a DVD´s playback control. 4 ANGLE: Press to access various camera angles on a DVD (If the DVD contains multiple camera angles). 5 AUDIO: Press to access various audio languages on a DVD (If the DVD contains multiple audio streams). 6 ENTER: Press this button to activate a setting or option 7 OPEN/CLOSE: Press to open or close the disc tray. 8 OSD: Press to access the On Screen Display Menu 9 ARROW buttons (< / > / / / ¤ ): Use to move the cursor in the OSD. A MUTE. Mutes the sound. Loudspeaker icons will disappear from the LCD display. B DISC MENU: Displays the DVD Disc Menu on the TV screen in play mode. C PAUSE: Freezes a picture (with DVD/VCD) and pauses the playback signal (CD) when a disc is playing. Press again for normal playback. D STATUS: Press while a disc is playing to view banner display. Use the ARROW buttons to move th ...