User manual JBL JBL ON TIME

49 Important Safety Instructions Please read the following operation precautions before use: 1 2 3 4 5 6 7 8 9 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do Not use this apparatus near water. Clean only with dry cloth. Do Not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do Not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do Not defeat the safety purpose of the polarized or grounding type plug. A polarizing plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong, are provided for safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT, PLEASE REFER SERVICING TO QUALIFIED HARMAN MULTIMEDIA CORPORATION SERVICE PERSONNEL. Never remove grille covers in order to service the speaker system. The speaker system does not contain any user serviceable parts. Refer all servicing to the Harman Multimedia Technical Support Group. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THE LIGHTNING FLASH AND ARRWOHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF "DANGEROUS VOLTAGE" INSIDE THE PRODUCT CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT. SEE MARKING ON BOTTOM OF PRODUCT 10 11 12 13 WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: THE APPARATUS (AC/DC ADAPTOR AND MAIN UNIT) SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUID, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. Minimum distances around the apparatus for sufficient ventilations is not less than 10mm; The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc; No naked flame sources such as lighted candles should be placed on the apparatus; Attention should be drawn to the environmental aspects of battery disposal; The use of apparatus in moderate climates; Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended used. To be completely disconnected the apparatus from supply mains, the mains plug of the apparatus shall be disconnected from the mains socket outlet completely. 14 15 Rating Information on the bottom of the Unit Important Note for all Electronic Products: Before inserting or unplugging audio cables from the source device's headphones or line-level output jacks, it is good practice to turn off the device. This will prolong the life of your unit, help protect your device from static electricity, and avoid potential damage. Introduction to your JBL On Time, a time machine for your iPodTM. Time, Sound, Sync, Charge The JBL ON TIME is the latest innovation from JBL, a long time leader in the manufacture of high-end and professional component audio systems. JBL's audio heritage combined with continual research has provided the unique technologies included in the JBL ON TIME. JBL "On Time" is a revolution in time travel for the iPodTM. Imagine waking up to your favorite song stored on your iPodTM. No more buzzer or bad radio reception. On time is a compact, high performance time machine and sound center. Connected to your iPodTM, iPod miniTM , MP3 player or other music source, the on time will provide clean, powerful sound while providing time keeping, alarm and radio features. The world's first time machine with an intuitive user interface that is simple to navigate. Compatibility The JBL on time is compatible with all docking versions of the iPodTM, including the iPod miniTM and iPodTM Photo. A stereo mini jack connection also allows you to enjoy high quality audio from a variety of other devices such as, iPod ShuffleTM , MP3 and CD players, desktop computers (all platforms) , satellite radio and laptops. Easy to use music and navigation controls Music Controls ­ Just a touch increases or decrease the volume. Another touch and you choose iPod, radio or auxiliary. JBL on time remembers your source and the last volume setting even after the system shuts down. Time and alarm features The intuitive user interface allows for all functions to be programmed easily. The JBL On Time includes two alarms for independent wake times. The navigation buttons provide instant access to the menus. The automatic time set feature provides one button time setting. Navigate the intuitive menu structure to change settings such as language, alarms and snooze. Radio functions such as channel presets are simple Display The large backlight LCD display provides for easy viewing and menu navigation. Automatic dimming provides the correct brightness level in any room environment. A dome light provides a glow for your iPod. Lighted buttons are easy to find in the dark. Additional Features OnePoint design - The OnePoint iPodTM connectors provide the connection to you computer. Connect the standard iPodTM cable to the rear of the on time and every time you dock your iPod, you will have a connection for synchronizing and charging. Evercharge Topology - The JBL on time provides power to charge your iPodTM even when not connected to the computer or if the system is off. Backup battery ­ The on time memory is keep by a backup battery. Even with the power out, the on time will provide the alarm function. TimeCrawler ­ The JBL On Time has the ability to set the clock automatically from any local radio station that transmits the time in their signal. Advanced Technology The JBL on time combines many proprietary technologies to provide the highest quality sound. The on time will provide astonishing bass and clear accurate sound from any direction. Halo acousticsTM - The horizontal acoustic level optimization or Halo acousticsTM design provides a full, rich sound field from any direction. The upward firing tweeter and horizontal low and midrange transducers provides a 360 degree sound field. PhoenixTM and RidgeTM Transducers ­ The two aluminum domed full range transducers are driven by powerful Neodymium magnets. The RidgeTM tweeter provides accurate high frequencies. This two way design provides a full rich frequency response from the lowest bass to the highest highs. COE (Computer Optimized Equalization) ­ The JBL on time system equalization was computer optimized to provide a rich, complete sound stage. OCT (Optimized Compression Topology) ­ The JBL on time utilizes a proprietary compression technology to insure clean accurate sound at high output levels. Document Number: 950-0068-001 Description: MANUAL, JBL On Time Revision: 09 Page 2 of 49 Unpacking · · · · · A B C D E Carefully unpack your speaker system and identify all components: On Time Power Supply iPod adaptors Aux audio cable AM antenna C B E A General Setup 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) D Unpack the JBL On Time and iPod adaptors and power adaptor Choose the appropriate iPod adaptor and place into docking station Place the iPod into the adaptor Plug power adaptor into jack marked 15Vdc in Plug adaptor into wall outlet If an additional audio source is used, connect source into Aux In Unwind the FM wire antenna. Straighten the wire for the best reception Connect external AM Antenna for better reception If the use of an additional subwoofer is desired, connect to Sub Out jack For backup memory settings, install 3 AAA batteries 2 4 5 Music Control Navigation Alarm control On/Off/Cancel On/Off/Cancel Clock Setting Instructions: 1) 2) 3) 4) 5) From the "PLEASE SET CLOCK SCREEN" Press any Navigation key. Use "Left/Right" button Use "Left/Right" button Use "Left/Right" button to set "hour" and press Enter "minute" and press Enter "day" and press Enter The JBL On Time will confirm the clock is set. Timecrawler ­ Auto time set 1) 2) 3) 4) The JBL On Time features TimeCrawler, which can set the clock automatically. The On Time scans to find a radio station that transmits the time, receives the signal and sets the clock. Press the "Menu Up/Back" button Use "Left/Right" button Use "Left/Right" button Use "Left/Right" button until you reach the "JBL On Time" screen to select "Set" and press Enter to "SetCLK" and press Enter "Auto" and press Enter The On Time will search for a radio station transmitting the time. When TimeCrawler finds a station, the On Time will display the % complete. The On Time will then show the time has been set. If the On Time is not successful with Timecrawler, it will instruct you to set the time manually. Please follow the Clock Setting Instructions shown above. *The accuracy of TimeCrawler is based on the accuracy of the local radio station clock. Playing music 1) 2) 3) Press "Mode Select" button Press "+" button Press "-" button to select the source (iPod, Radio, Aux.) to increase volume to decrease volume Radio Tuning and Presets: 1) 2) 3) 4) Press the "Menu Up/Back" button Select "listen" and press Enter Select "radio" and press Enter Select "FM" or "AM" and press Enter until you reach the "JBL On Time" screen Document Number: 950-0068-001 Description: MANUAL, JBL On Time Revision: 09 Page 3 of 49 5) 6) 7) 8) 9) Tune to the desired frequency using "Left/Right" buttons PRESETS: Press and hold the Enter button Use "Left/Right" button Press the "Menu Up/Back" button Use the "Left/Right" button . Hold either button and release to scan for the next station. to select preset number and press Enter to exit to navigate the presets Alarm Setting: 1) 2) 3) 4) 5) Press the "Menu Up/Back" button Use "Left/Right" button Use "Left/Right" button Select "Time" and press Enter Enter time for alarm and day Day mode options are: ED-everyday, WD-weekdays and WE-weekend Use "Left/Right" button Use "Left/Right" button to select "Source" and press Enter to select the desired wakeup source and press Enter or "Alarm 2" buttons (An alarm icon on the main screen will indicate Alarm 1 or Alarm 2 status) until you reach the "JBL On Time" screen to select "Alarms" and press Enter to Select "Alarm 1," or "Alarm 2" and press Enter 6) 7) 8) To enable the alarm, press the "Alarm 1" Waking to you iPod: 1) 2) 3) 4) 5) Use steps for alarm setting and choose iPod as the source. On your iPod, choose the song you would like to awaken you**. And press play***. The volume will start at a low level and ramp to a higher level. Place your iPod to sleep by holding down the "play/pause" button. (Older iPod models will vary) The JBL On Time can be put to sleep by pressing the power button. ** Some versions of iPod software may behave differently. *** If you choose the last song on your iPod, please place iPod in repeat mode, this ensures the iPod will continue to play the last song. Screen Contrast/Brightness: 1) 2) 3) 4) 5) Press the "Menu Up/Back" button Use "Left/Right" button Select "Extras" and press Enter Select "Screen" and press enter Select "bright" or contrast" and press Enter until you reach the "JBL On Time" screen to select "Set" and press Enter Select desired setting and press Enter Languages: 1) 2) 3) 4) Press the "Menu Up/Back" button Use "Left/Right" button Select "extras" and press Enter Select "Lang" and press Enter until you reach the "JBL On Time" screen to select "Set" and press Enter Select desired language and press Enter Sleep Timer: 1) 2) 3) 4) 5) Press the "Menu Up/Back" button Use "Left/Right" button Select "Sleep" and press Enter Press Enter to Select On or Off to select "Minutes" and press Enter until you reach the "JBL On Time" screen to select "Set" Use "Left/Right" button Select desired time and press Enter Snooze: 1) 2) 3) Press the "Menu Up/Back" button Use "Left/Right" button Use "Left/Right" button until you reach the "JBL On Time" screen to select "Alarms" and press Enter to select "Snooze" and press Enter Select desired Snooze time and press Enter Document Number: 950-0068-001 Description: MANUAL, JBL On Time Revision: 09 Page 4 of 49 JBL On Time Menu Tree on time Listen Alarms Set Listen iPod Radio AuxAlarm-1 Alarm Alarm-2 Snooze Set Clk Set Sleep Extras Listen iPod Listen Aux-in Time Alarm-1 -SetSource Set Clock Slee p Timer On/Off Minutes Listen Radio FM AM US/EURO Set Alarm-1 -Hour11a Auto Clock - Set 89.9 Slee p Timer 30 MIN FM Radio 95.5 Preset USA RadioT ype Euro Set Alarm 1 -Minute00 11a Manual Clk - Set 01 WE Screen Extras - Set Lang RDS AM Radio 520 Preset Set Alarm -1 Everyday or Wkdays or Wkends Set Clock -Hour11a Bright Screen - Set Contrast Alarm-1 -SourceiPod Radio Tone Set Clock -Minute20 LANGUAGE ENGLISH Set Clock -DaysWednesday Snooze Time -Set09 minutes Clock Is -Set11:00 Am Sunday RDS - Set ON/OFF Brightness -SetLO MED HI AUTO Brightness -SetMANUAL OFF Contrast - Set 50 Document Number: 950-0068-001 Description: MANUAL, JBL On Time Revision: 09 Page 5 of 49 49 49 49