Operation Manual Mode d'emploi Gebruiksaanwijzing Bedienungsanleitung Manual de instrucciones Manual do utilizador EN FR NL DU ES PT WWW.BEGLEC.COM Copyright © 2007 by BEGLEC cva. Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Version: 1.0 EN - DISPOSAL OF THE DEVICE Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. FR - DÉCLASSER L'APPAREIL Débarrassez-vous de l'appareil et des piles usagées de manière écologique Conformément aux dispositions légales de votre pays. NL - VERWIJDEREN VAN HET APPARAAT Verwijder het toestel en de gebruikte batterijen op een milieuvriendelijke manier conform de in uw land geldende voorschriften. DU - ENTSORGUNG DES GERÄTS Entsorgen Sie das Gerät und die Batterien auf umweltfreundliche Art und Weise gemäß den Vorschriften Ihres Landes. ES - DESHACERSE DEL APARATO Reciclar el aparato y pilas usadas de forma ecologica conforme a las disposiciones legales de su pais. PT - COMO DESFAZER-SE DA UNIDADE Tente reciclar a unidade e as pilhas usadas respeitando o ambiente e em conformidade com as normas vigentes no seu país. ENGLISH OPERATION MANUAL ENGLISH OPERATION MANUAL Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully. ® FEATURES This unit is radio-interference suppressed. This appliance meets the requirements of the current European and national guidelines. Conformity has been established and the relevant statements and documents have been deposited by the manufacturer. 2-way stereo or 3-way mono crossover Full scale frequency selection between 45 to 9600Hz 24dB/oct. Linkwitz - Riley filters All inputs and outputs are balanced or unbalanced with XLR connections Subsonic filter (40Hz) with ON/OFF switch Gain control on all inputs and outputs Phase inverter switch BEFORE USE Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual. To protect the environment, please try to recycle the packing material as much as possible. Check the contents: Check that the carton contains the following items: User manual Power Cable EC102/XO210 unit To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. This unit is for indoor use only. Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit, immediately disconnect the mains power. No naked flame sources, such as lighted candles, should be placed on the appliance. Don't cover any ventilation openings as this may result in overheating. Prevent use in dusty environments and clean the unit regularly. Keep the unit away from children. Inexperienced persons should not operate this device. Maximum save ambient temperature is 45°C. Don't use this unit at higher ambient temperatures. Always unplug the unit when it is not used for a longer time or before you start servicing. The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. Check that the available voltage is not higher than the one stated on the rear panel of the unit. The socket inlet shall remain operable for disconnection from the mains. The power cord should always be in perfect condition. Switch the unit immediately off when the power cord is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Never let the power-cord come into contact with other cables! When the power switch is in OFF position, this unit is not completely disconnected from the mains! This appliance must be earthed to in order comply with safety regulations. In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user serviceable parts inside. Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type and electrical specifications! In the event of serious operating problems, stop using the appliance and contact your dealer immediately. Please use the original packing when the device is to be transported. Due to safety reasons it is prohibited to make unauthorized modifications to the unit. INSTALLATION GUIDELINES: Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity. Placing and using the unit for long periods near heat-generating sources such as amplifiers, spotlights, etc. will affect its performance and may even damage the unit. The unit can be mounted in 19-inch racks. Attach the unit using the 4 screw holes on the front panel. Be sure to use screws of the appropriate size. (screws not provided) Take care to minimize shocks and vibrations during transport. When installed in a booth or flight case, please make sure to have good ventilation to improve heat evacuation of the unit. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance. CLEANING THE APPLIANCE: Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not use volatile liquids such as benzene or thinner which will damage the unit. SAFETY INSTRUCTIONS: CAUTION: To reduce the risk of electric shock, do not remove the top cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. This symbol means: indoor use only. This symbol means: Read instructions. JB SYSTEMS® 1/30 EC102/XO210 JB SYSTEMS® 2/30 EC102/XO210 ENGLISH OPERATION MANUAL ENGLISH OPERATION MANUAL CONNECTIONS Use good quality cables to prevent bad audio quality. For more information on connections, please refer to the next chapter and the picture below. Be sure to turn off the equipment before you make changes to the different connections. In this manual we talk about "line inputs". This is a global name for inputs with a level between 750mV and 2V. This includes tuners, videos, CD-players, etc. 5. LOW/MID Output: Controls the: In Stereo mode: LOW frequency output level from - to +6dB ( both channels ) In Mono mode: LOW frequency output level from - to +6dB on Channel 1 MID frequency output level from - to +6dB on Channel 2 6. LOW/MID Phase Invert Switch: Switch for inversing the polarity. A LED indicates your selection: In Stereo mode: you can inverse the polarity on the LOW output In Mono mode: you can inverse the polarity on the LOW output on Channel 1 you can inverse the polarity on the MID output on Channel 2 Remark: Use this switch with care. This switch is most effective on the low frequencies: switch the inverter on/off while listening to the music. Choose the position with the most bass reproduction 7. HIGH Output: controls the HIGH frequency output level from - to +6dB. When you work in Mono mode, you can only use the Channel 2 knob. 8. HIGH Phase Invert Switch: Switch for inversing the polarity on the HIGH output. A LED indicates your selection. When you work in Mono mode, you can only use the switch on Channel 2. Remark: In most cases you don't need to use this switch. When the setting is wrong, it can bring you more bad then good 9. MONO/STEREO LED: This LED indicates if you are working in MONO or STEREO Mode: MONO Mode: Both channels work together to obtain a 3-way mode crossover STEREO Mode: Both channels work independently to obtain an 2x2-way crossover 10. Power Switch: Switch for turning the unit ON/OFF FUNCTIONS (rear) FUNCTIONS (FRONT) 1. Input Gain: Controls the INPUT level with +/- 12dB. 2. Low Cut Switch: Push this button to select the 40 Hz high pass filter. Use this filter to protect your speakers and amplifier from unwanted subfrequencies that only consume power but don't necessarily add more punch 3. Crossover Point selection: Selects the crossover point between: In Stereo mode: LOW and HIGH frequencies In Mono mode: LOW and MID frequencies on the Channel 1 MID and HIGH frequencies on the Channel 2 4. X10 LED: X10 LED off: you can control the x-over frequency from 45Hz to 960Hz X10 LED on: you can control the x-over frequency from 450Hz to 9.6kHz 11. Mains Input: with IEC socket and integrated fuse holder, connect the supplied mains cable here 12. Ground Lift Switch: In some cases nasty hum noises can occur due to ground loops in your setup. Setting the Ground Lift Switch to the position "lift" breaks the ground loop between the EC102/XO210 and the chassis grounds of various other components in your setup. As a result the hum noises will disappear. 13. XLR Inputs: Balanced inputs using XLR cables. When you work in Mono Mode, you only have to connect an XLR cable on Channel one 14. LOW/MID XLR Output: Balanced outputs using XLR cables: In Stereo Mode: When you work in Normal mode ( see number 17 for more information ), you have to connect an XLR cable to Channels 1 and 2. When you work in Summed mode, you only have to connect an XLR cable to Channel 1. In Mono Mode: Channel 1 operates the LOW output. Channel 2 operates the MID output. 15. HIGH XLR Output: Balanced outputs using XLR cables: In Stereo Mode: You have to connect an XLR cable to both channels In Mono Mode: Only Channel 2 is used 16. MONO/STEREO Switch: With this switch, you can choose between MONO 3-way or STEREO 2x2-way Mode 17. LF SUM Switch: With this switch, you can choose if you want your LOW frequencies in normal mode ( 2 outputs ), or summed ( uses only channel 1 output ) ( see number 14 for more information ). In summed mode the low frequency from Channels 1&2 are put together so you don't have to use a splitter cable in case you have only 1 subwoofer. JB SYSTEMS® 3/30 EC102/XO210 JB SYSTEMS® 4/30 EC102/XO210 ENGLISH OPERATION MANUAL FRANCAIS MODE D'EMPLOI 18. Crossover Frequency Switch: With this switch, you can choose between x1/x10 frequency range ( see number 4 for more information ) SPECIFICATIONS Power Supply: Fuse: Frequency response: THD + noise: S/N Ratio (IHF-A): Line inputs: Outputs: CrossoverFrequencies: Dimensions: Weight: AC 230 V, 50Hz 20mm glass fuse 250V 500mA slow 20Hz to 20kHz, +0/-0.5 dB <0.004% @ 1kHz, 4dB >90dB @ 1kHz. 1V @ 10k 1V @ 600 45 ­ 960 Hz ( normal mode ) 450 ­ 9600 Hz ( x10 mode ) 483(W) x 44(H) x 136(D) mm 2kg Nous vous remercions d'avoir acheté ce produit JB Systems . Veuillez lire ce mode d'emploi très attentivement afin de pouvoir exploiter toutes les possibilités de cet appareil. ® CARACTERISTIQUES Cet appareil ne produit pas d'interférences radio. Il répond aux exigences nationales et européennes. La conformité a été établie et les déclarations et documents correspondants ont été déposés par le fabricant. Filtre actif: 2-voies stereo ou 3-voies mono Sélection complète des fréquences de 45 Hz à 9600 Hz Filtres Linkwitz-Riley 24dB/oct. Chaque entrée et sortie en XLR ( toujours balance ou non-balancée ) Filtre subsonique 40 Hz ( avec interrupteur marche/arrêt ) Réglage du GAIN pour chaque entrée et chaque sortie Interrupteur pour inversion de `Phase' Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www.beglec.com AVANT L'UTILISATION Quelques instructions importantes: Avant d'utiliser cet apparei ...