531CF USER'S MANUAL 3D AGP VGA / 3D Audio M/B FOR Pentium processor The author assumes no responsibility for any errors or omissions which may appear in this document nor does it make a commitment to update the information contained herein. NO. G03-531CFR6A Release date: SEP 2000 ** Year 2000 compliant ** Trademark: *Pentium is registered trademark and MMX is a trademark of Intel corporation, the other names and brands are the property of their respective owners. *Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT Chapter 1 1-1 Preface ..........................................................................................1 1-2 Orerview ........................................................................................1 1-3 Key Feature ................................................................................... 2 Chapter 2 Hardware lnstallation ............................................................................... 3 2-1 Unpacking ..................................................................................... 3 2-2 Mainboard Layout ............................................................................. 4 2-3 Quick Reference for Jumpers, Connectors & Expansion Socket............ 5 2-3-1 lnstallation Steps ................................................................... 6 2-3-2 Jumper Settings .................................................................... 6 2-3-3 System Memory (DRAM) ...................................................... 8 2-4 Central processing Unit (CPU) ................................................... 9 2-5 Expansion Cards .......................................................................... 9 2-6 External Connectors ...................................................................10 Chapter 3 AWARD BIOS SETUP ...........................................................................16 STANDARD CMOS SETUP.............................................................17 BIOS FEATURES SETUP ...............................................................18 CHIPSET FEATURES SETUP .........................................................18 POWER MANAGEMENT SETUP.....................................................19 3-4-1 The Description of the Power Management.............................21 3-4-2 Description of the Green Functions.........................................23 3-5 PNP/PCI CONFIGURATION SETUP ................................................24 3-6 LOAD OPTIMAL DEFAULTS...........................................................25 3-7 LOAD STANDARD DEFAULTS .......................................................25 3-8 INTEGRATED PERIPHERALS SETUP ............................................26 3-9 SUPERVISOR/USER PASSWORD..................................................26 3-10 SAVE & EXIT SETUP......................................................................27 3-11 EXIT WITHOUT SAVING.................................................................27 3-1 3-2 3-3 3-4 Chapter 4 Software Installed ..................................................................................28 4-1 On Board VGA Driver Quick Installation........................................28 4-2 PC HEALTH MONITOR Driver Quick Installation ...........................28 4-3 Sound Driver & Audio Rack Installation ........................................28 APPENDIX-A Magic Install i Chapter 1 2-3- Preface Thank you for chosen 531CF mainboard. This mainboard is based on Pentium® processor PC/AT compatible system with ISA bus and PCI local bus. This board has including some special designs, such as share memory 3D AGP VGA on-board, 3D Stereo Sound System audio chip on-board, ACPI/APM power management along with many other powerful features. We think you will enjoy your personal computer because of your right choice. 1-2 Overview · · · · Support 100MHz Bus Frequency processor. Support SDRAM clock selectable in 100MHz by jumper setting in order to allow user has wider choice of SDRAM. Provide PC Health Monitoring to track CPU temperature, CPU/SYSTEM FAN Speed and system voltage. Built-In High performance 3D AGP VGA: Support share memory 2MB to 8MB selectable in BIOS SETUP. 64 bits memory data interface. Integrated programmable 24-bit true-color RAMDAC up to 230MHz pixel clock. Integrated two 96x64 video line buffers for MPEG video playback. Support 64 bit memory data bus interface. Integrated a high performance and high quality 3D engine. Support DIC, Direct Draw Driver. Support AGP Spec.1.0 compliant, 1x mode(66MHz), 2x mode(133MHz). Built in high quality PCI-Based HRTF 3D Extension Positional Audio Chip Supports rear side speakers, C3DX positional audio in 4 channels speaker mode. Professional digital audio interface to support 24-bit SPDIF IN and OUT (44.1K and 48K format). HRTF-base 3D positional audio, supporting DirectSoundTM 3D and Aureal A3DTM interface. Digital functions that capable to provide hi-fi stereo, Dolby, 3D surround effects, and playing MP3 music. You can add our Fiber Optic upgrade kit (Optional) for super high quality sound transaction, such as playing MD/CD; MD recording; CD-ROM directly recording to MD; (This upgrade kit includes Optical Module, Optical Cable). · · 1 1-3 Key Feature · · · · · · Multi-Speed Support : support 66/75/83/95/100MHz Host Bus Frequency for Intel Pentium processor with MMX technology ,AMD K5/K6/K6-2/K6-3,Cyrix 6x86 M1/M2,IDT Winchip/ Winchip2 CPU on a ZIF Socket7. Chipset: SiS 530/5595 AGPset chip with I/O subsystems and CMI 8738 PCI Audio chip. L2 Cache : Provide on board 512K/1MB Pipelined Burst SRAM to increase system performance. DRAM Memory Support: support Two 168-pin DIMMS (3.3V) from a memory size between 8MB to 512MB. ISA and PCI expansion Slots: Provides one 16-bit ISA slots, three PCI slots. Super Multi-I/O: Provides two high-Speed UART compatible serial ports and one parallel port with EPP and ECP capabilities. UART2 can also be directed to the Infrared Module for wireless connections. Two floppy drives of either 5.25" or 3.5" (1.44MB or 2.88MB) are also supported without an external card. PCI Bus Master IDE Controller and ULTRA DMA 33/66: On-board PCI Bus Master IDE · controller with two connectors that supports four IDE devices in two channels, provides faster data transfer rates, and supports Enhanced IDE devices such as Tape Backup, CD-ROM drives and LS-120. This controller also supports PIO Modes 3 and 4 and Bus Master IDE DMA · 33/66 Mbyte/Sec. ACPI supporting for OS Directed Power Management. Keyboard Passward Power On: When with JP5 set to Enabled, you can choose "power on" function by using password within BIOS to control your power supply to power ­on by keyboard instead of power button . Ring-In Wake up: When Ring-In the system can wake up from SMI Mode. Ring-In Power On: When Ring-In the system can power on automatic by this RTC Power On: Enabled RTC Power On function, you can set RTC alarm to power on the system at the time length that correspond to your setting. Power Button: Press the button will place the system power on/off. Software off when uses ATX power supply. Power Support: Efficient PWM switching power instead of traditional Linear Voltage Regulator to prevent power component from being burned-out. Meets PC99 Requirements. Optional IRDA: This motherboard supports an optional infrared port modul module for wireless interface. USB Port Connector: This motherboard supports two USB port connectors for USB devices. Micro ATX Form Factor: Dimensions 19cm x 24.5cm. · · · · · 2 Chapter 2 Hardware Installation 2-3- Unpacking The 531CF mainboard USER'S MANUAL for mainboard Cable set for IDE x1, Floppy x1,COM x1 CD for Drivers PACK This mainboard package should contain the following: · · · · The mainboard contains sensitive electronic components that can be easily damaged by electronstatic, so the mainboard should be left in its original packing until it is installed. Unpacking and installation should be done on a grounded anti-static mat. The operator should be wearing an anti static wristband, grounded at the same point as the antistatic mat. Inspect the mainboard carton for obvious damage. Shipping and handling may cause damage to your board. Be sure there are no shipping and handling damages on the board before proceeding. After opening the mainboard carton, extract the system board and place it only on a grounded anti-static surface component side up. Again inspect the board for damage. Press down on the entire socket IC's to make sure that they are properly inserted. Do this only on with the board placed on a firm flat surface. Warning: Do not apply power to the board if it has been damaged. You are now ready to install your mainboard. The mounting hole pattern on the mainboard matches the Micro ATX system board. It is assumed that the chassis is designed for a Micro ATX main board mounting. Place the chassis on the anti-static mat and remove the cover. Take the plastic clips, Nylon stand-off and screws for mounting the system board, and keep them separate. 3 2-3- UB S VA G1 C M1 O KBMS1 SP IF D IN GAME PORT MIC LINE LINE -IN -OUT LPT1 JP1 U 2 Mainboard Layout SIS5595 U 15 64K X64 FDD KE C YLO K SPEAKER SYSFAN BIO S TBSW N SMI PS-O HDLED R ST TBLED DIMM1 DIMM2 IS 1 A ITE8661F JP2 IR 1 C M2 O JP 5 JP3 SDIFO UT SPKIN C MI8738 U 5 WL O JP7 JP6 P1 W CU A P -F N ATX PO WERC NN. O JP 9 U 9 P I3 C P I2 C P I1 C Figure 2-1 4 32K X8 JP 10 JP 11 ZIF SO KE 7 CT C PU U 12 S 530 IS U 17 B TT. A + JP 12 U17 IDE1 IDE 2 2-3- Quick Reference for Jumpers, Connectors & Expansion Socket Jumper Name CPU Voltage Selection CPU Bus Frequency Selection CMOS RAM Clear Audio chip Enabled/Disabled Keyboard power on function Jumpers Description ON:Short , OFF:Open ON:Short , OFF:Open 2-3 Normal , 1-2 Clear CMOS 2-3 : Enabled, 1-2 : Disabled 1-2 : Disabled, 2-3 : Enabled Page p. 6 p. 6 p. 8 p.14 p.15 JP9 JP10,JP11 JP12 JP3 JP5 Connectors Connector PW1 KBMS1 USB Name ATX Power Connector PS/2 Keyboard/PS/2 Mouse USB Port Connector Description 20-Pin Block 6-Pin Female 5-Pin Connector 26-Pin Female 15-Pin Female 15-pin Connector + 3 phone jack 10-Pin Block 10-Pin Block 34-Pin Block 40-Pin Block 40-Pin Block 2-Pin Connector 16-Pin Block 5-Pin Block 3-Pin Block 2-Pin Connector 4-pin Block 4-pin Block 3-pin Block 4-pin Block 2-pin Block 3-pin Block 2-pin Block 10-pin Block Page p. 9 p.10 p.13 p.10 p.10 p.11 p.10 p.10 p.11 p.11 p.11 p.12 p.12 p.12 p.13 p.13 p.14 p.14 P.14 p.15 p.14 p.15 p.15 p.15 LPT1 Parallel Port Connector VGA1 VGA Connector GAME PORT Line IN/Line Out/MIC /Game Port Connector COM1 Serial Port COM1 COM2 Serial Port COM2 FDD Floppy Driver Connector IDE1 Primary IDE Connector IDE2 Secondary IDE Connector HDLED IDE activity LED Case Connections Front Panel Connector IR1 Infrared Module Connector CPUFAN/SYSFAN FAN Connector PS-ON ATX power button/soft power button JP6 CD-Audio/Panasonic JP7 CD-Audio/Sony WOL Wake On LAN JP1 AUX Connector SPKIN PC Speaker In SPDIFIN SPDIFIN (Sony/Philips Digital Interface) SPDIFOUT SPDIFOUT (Sony/Philips Digital Interface) JP2 Opticl Kit Connector Expansion Slots Socket/Slot DIMM1,DIMM2 Zip Socket7 ISA1 PCI1, PCI2,PCI3 Name DIMM Module Socket CPU Socket ISA Slot PCI Slot Description 168-Pins DIMM SDRAM Module Expansion Socket Socket for Central Processing Unit (CPU) 16-bits ISA Bus Expansion slots 32-bits PCI Local Bus Expansion slots 5 2-3-1 Installation Steps Before using your computer, you must follow the steps as follows: 1. Set Jumpers on the Motherboard 2. Install the CPU 3. Install DRAM Modules 4. Install Expansion card 5. Connect Cables, Wires, and Power Supply 2-3-2 Jumper Settings CPU Voltage Selection: JP9 (2x5pin Block) This jumper is used for adjusting CPU working voltage, for this main board design it can auto detect the single voltage CPU or dual voltage CPU. The table of JP9 CPU voltage selection JP9 1.8V 2.0V 2.1V 2.2V 2.3V 2.4V 2.8V 2.9V 3.2V 3.3V 3.4V 3.5V 1-2 OFF OFF ON OFF ON OFF OFF ON OFF ON OFF ON 3-4 ON ON OFF ON ON OFF OFF OFF OFF OFF ON ON 5-6 OFF ON OFF OFF OFF ON OFF OFF ON ON ON ON 7-8 ON ON OFF OFF OFF OFF ON ON ON ON ON ON 9-10 ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF If your CPU Type is not including in above table, please refer to the CPU voltage selection on below to choose the correct working voltage for your CPU. JP3 2 1 10 9 2 1 JP3 10 9 2 1 JP3 10 9 2 1 JP3 10 9 2 1 JP3 10 9 2 1 JP3 10 9 1.8V JP3 2 1 10 9 2 1 2.0V JP3 10 9 2 1 2.1V JP3 10 9 2 1 2.2V JP3 10 9 2 1 2.3V JP3 10 9 2 1 2.4V JP3 10 9 2.8V 2.9V 3.2V 3.3V 3.4V 3.5V CPU Voltage Selection CPU Type selection: This mainboard designs JP10 to select the CPU external clock (Host Bus Frequency) and JP11 t ...