601CF USER'S MANUAL M/B For Socket 370 Pentium III Processor NO. G03-601CFR4A Release date: November 2001 Trademark: * Pentium is registered trademark and MMX is a trademark of Intel Corporation, the other names and brands are the property of their respective owners * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER'S NOTICE .............................................................................. ii MANUAL REVISION INFORMATION ............................................. 1 THERMAL SOLUTIONS.................................................................... 1 CHAPTER 1 INTRODUCTION OF 601CF MOTHERBOARD 1-1 1-2 1-3 1-4 FEATURE OF MOTHERBOARD............................................................... 2 SPECIFICATION .......................................................................................... 3 PERFORMANCE LIST ................................................................................ 4 LAYOUT DIAGRAM & JUMPER SETTING ........................................... 5 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS ..................................................... 7 2-2 CHECKING MOTHERBAORD'S JUMPER SETTING .......................... 7 2-3 INSTALL CPU ............................................................................................... 8 2-3-1 ABOUT PENTIUM & CELERONTM 370-PIN CPU.................... 8 2-3-2 SETTING CPU BUS CLOCK & MEMORY CLOCK JUMPER . 9 2-3-3 INSTALL CPU.................................................................................... 9 2-3-4 OVERCLOCK RUNNING ...........................................................................10 2-4 INSTALL MEMORY .................................................................................... 11 2-5 EXPANSION CARD ...................................................................................... 12 2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION ..................12 2-5-2 ASSIGNING IRQ FOR EXPANSION CARD ............................................ 12 2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD.......... 13 2-6 CONNECTORS, HEADERS ........................................................................ 13 2-6-1 CONNECTORS .............................................................................................13 2-6-2 HEADERS ...................................................................................................... 16 2-7 STARTING UP YOUR COMPUTER.......................................................... 19 CHAPTER 3 INTRODUCING BIOS ENTERING SETUP....................................................................................... 20 GETTING HELP............................................................................................ 21 THE MAIN MENU ........................................................................................ 21 STANDARD CMOS FEATURES................................................................. 23 ADVANCED BIOS FEATURES .................................................................. 23 ADVANCED CHIPSET FEATURES .......................................................... 24 3-6-1 ADVANCED DRAM CONTROL ..................................................... 25 3-7 INTEGRATED PERIPHERALS.................................................................. 26 3-7-1 ONCHIP IDE FUNCTION...........................................................................27 3-7-2 ONCHIP DEVICE FUNCTION...................................................................27 3-7-3 ONCHIP SUPERIO FUNCTION ................................................................28 3-1 3-2 3-3 3-4 3-5 3-6 3-8 POWER MANAGEMENT SETUP.............................................................. 28 3-8-1 POWER MANAGEMENT ...........................................................................29 3-8-2 WAKE UP EVENTS .....................................................................................29 i 3-8-2.1 IRQS ACTIVITY MONITORING ........................................................... 30 3-9 3-10 3-11 3-12 3-13 PNP/PCI CONFIGURATION SETUP........................................................ 30 PC HEALTH STATUS................................................................................. 31 MISCELLANEOUS CONTROL ................................................................ 32 LOAD STANDARD/OPTIMIZED DEFAULTS ....................................... 32 SET SUPERVISOR/USER PASSWORD ................................................... 33 CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION MAGIC INSTALL SUPPORTS WINDOWS 95/98/98SE/NT4.0/2000 ............. 34 4-1 IDE INSTALL VIA IDE/AGPVXD/IRQ ROUTING/INF DRIVER .................... 35 4-2 VGA INSTALL VIA 8601 VGA DRIVER ........................................................ 37 4-3 SOUND INSTALL ALC AUDIO CODEC DRIVER FOR VIA ................ 37 4-4 PC-HEALTH INSTALL VIA HARDWARE MONITOR DRIVER ................... 39 4-4-1 HOW TO USE VIA HARDWARE MONITRO APPLICATION SOFTWARE ..................................................................................................39 4-5 MAGIC BIOS INSTALL BIOS LIVE UPDATE UTILITY................................ 40 4-6 PC-CILLIN INSTALL PC-CILLIN 2000 ANTI-VIRUS PROGRAM ............ 41 4-7 HOW TO DISABLE ON-BOARD SOUND................................................. 43 4-8 HOW TO UPDATE BIOS ............................................................................. 43 USER'S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE 601CF MOTHERBOARD AND WE DO ASSURE THIS MANUAL MEETS USER'S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE). PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER'S BENEFIT, WITHOUT INTENT TO INFRINGE. ii Manual Revision Information Reversion 4.0 Revision History Fourth Edition Date November 2001 Item Checklist 601CF Motherboard Cable for IDE/Floppy CD for motherboard utilities 601CF User's Manual Intel Processor Family Thermal Solutions As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly crucial when building computer systems. Maintaining the proper thermal environment is key to reliable, long-term system operation. The overall goal in providing the proper thermal environment is keeping the processor below its specified maximum case temperature. Heatsinks induce improved processor heat dissipation through increased surface area and concentrated airflow from attached fans. In addition, interface materials allow effective transfers of heat from the processor to the heatsink. For optimum heat transfer, Intel recommends the use of thermal grease and mounting clips to attach the heatsink to the processor. When selecting a thermal solution for your system, please refer to the website below for collection of heatsinks evaluated and recommended by Intel for use with Intel processors. Vendor list for heatsink and fan of Pentium® !!! processor, please visit¡G http://developer.intel.com/design/Pentiumiii/components/index.htm Vendor list for heatsink and fan of Intel®CeleronTM processor, please visit¡G http://developer.intel.com/design/celeron/components/index.htm Chapter 1 1 Introduction of 601CF Motherboard 1-1 Feature of motherboard The 601CF motherboard is design for use Intel's new generation Pentium processors, which utilize the Socket 370 design and the memory size expandable to 1GB (using 256Mb technology). This motherboard integrated VGA, Audio, and PC Health Function with Micro ATX form factor to support total solution for today's computer market. This motherboard using VIA Apollo PLE133 VT8601A and VT82C686B chipset, whose 133MHz front side bus delivers a clear upgrade path to the future generation of 133MHz processors and PC-100/PC-133 SDRAM. The 601CF motherboard offers ULTRA DMA 66/100 (ATA 100) to provide speedier HDD throughout that boosts overall system performance. The 601CF also has an integrated AC'97 2.1 CODEC on board which is fully compatible with Sound Blaster Pro that gives you the best sound quality and compatibility. VIA VT8601A chipset also includes integrated 3D Graphic Acceleration to provide a lower cost video display solution. With USB control as well as capability of expanding to 4 USB connectors support four USB devices, the 601CF meet future USB demand. Moreover, it has built-in hardware monitor function to monitor and protect your computer. This motherboard provides high performance & meets future specification demand. It is really wise choice for your computer. 1-2 Specification 2 Spec Design Chipset Clock Generator Description Micro ATX form factor 4 layers PCB size: 24.4 x 19.0 cm VIA Apollo PLE133 VT8601A and VT82C686B Chipset Winbond W83194BR-39B Support 66/100/133MHz system Bus Clock (CPU Bus Clock) Support 100/133 MHz system memory clock Support 33MHz PCI Bus clock Support Pentium III 5001GHz processor Support Celeron 300900MHz processor Support 66, 100 and 133MHz CPU Bus clock Reserves support for future Intel Pentium III processors Support Cyrix III series processors 168-pin DIMM socket x2 PC-100/PC-133 SDRAM Expandable to 1GB Support 3.3V SDRAM DIMM 32-bit PCI slot x3 AMR slot x1 ISA slot x1 64-bit Signal Cycle 2D/3D Graphic Engine Support 2 to 8 Mbytes of Frame Buffer 2 channel of Bus Master IDE port supporting ULTRA DMA 33/66/100 mode devices AC'97 Digital Audio controller integrated AC'97 Audio CODEC on board Audio driver and utility included Award 2Mb Flash ROM PS/2 keyboard and PS/2 mouse connectors Floppy disk drive connector x1 Parallel port x1 Serial port x2 USB connector x2, USB header x2 Audio connector (Line-in, Line-out/MIC & Game Port) CPU Socket Memory Socket Expansion Slot & Headers Integrate VGA Integrate IDE Audio BIOS Multi I/O 1-3 Performance List 3 The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Intel PIII 866MHz/Celeron 667MHz FC-PGA package CPU: 128M SDRAM x2 (Hyundai GM72V66841ET75) DRAM: VGA Expansion Card: Onboard VGA / VIA VT82C686B IBM DTLA-305040 (ATA-100) Hard Disk Driver: Award Optimal default BIOS: Win 98SE OS: Performance Test Report Pentium III 866MHz Share 8M Celeron 667MHz Share 8M 3D Mark 99 1399 640 3D Mark 2000 752 314 3D Winbench 99 V1.2 337 144 3D Winbench 2000 13 6.47 Final Reality 3.85 2.39 Winstone 99 V1.3 28 18.8 Content Creation Winstone 2000 31.9 19.4 Content Creation Winstone 2001 35.7 20.2 Business Winstone 2001 32.3 17.9 Winbench 99 : CPU Mark 99 70.7 29.2 FPU Winmark 99 4590 3350 Business Disk Winmark99 4420 3930 Hi-end Disk Winmark99 15700 12500 Business Graphic Winmark 193 92 Hi-end Graphic Winmark 684 417 SYS Mark 2000 : SISMark 2000 Rating ( Internet Content Creation/Office Productivity ) Suites 154 (162/149) 79 (85/74) Official 154 (163/148) 79 (86/74) SISOFT Sandra 2000 : CPU MIPS 2342 1782 FPU MFLOPS 1159 882 CPU / Memory MB/S 208 90 FPU / Memory MB/S 221 95 QUAKE3 : DEMO1 FPS 16.9 8.0 DEMO2 FPS 8.3 4.7 1-4 Layout Diagram & Jumper Setting 4 PRINT PS/2 MOUSE PS/2 Keyboard USB COM1 GAME/MIDI PORT VGA LINE-IN MIC LINE-OUT COM2 Connector (JMP1) CPU F.S.B. Clock CPU FAN CPU Socket PC99 Back Panel PC133 DIMMX2 Floppy Connector VIA 8601A Chip ATX Power Connector CD Audio AMR Slot Front Panel Audio VIA VT 82C686B Chip PCI Slot 2M Flash ROM BIOS USB2 Port SYSTEM FAN ISA Slot Front Panel Connector IR Connector Wake On Modem Wake On LAN (JBAT1) Clear CMOS ATA 100 IDE Connector Jumpers Jumper Name Description Page 5 JMP1 JBAT1 CPU Front Side Bus Frequency Setting CMOS RAM Clear 2x4-pin Block 3-pin Block p.7 p.8 Connectors Connector ATX PS1 USB1 PRINT VGA1 AGC COM1 FDD IDE1 IDE2 Name ATX Power Connector PS/2 Mouse & PS/2 Keyboard Connector USB Port Connector Parallel Port Connector VGA Port Connector Audio/Game Connector Serial Port COM1 Connector Floppy Driver Connector Primary IDE Connecto ...