613DF USER'S MANUAL Flex ATX Mainboard For Socket 370 Processor NO. G03-613DFR1A Release date: OCT 2000 Trademark: * Pentium is registered trademark and MMX is a trademark of Intel Corporation, the other names and brands are the property of their respective owners * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER'S NOTICE .......................................................................... 1 MANUAL REVISION INFORMATION ........................................... 2 THERMAL SOLUTIONS ............................................................... 2 CHAPTER 1 INTRODUCTION OF 613DF MOTHERBOARD 1-1 1-2 1-3 1-4 FEATURE OF MOTHERBOARD............................................................... 3 SPECIFICATION .......................................................................................... 4 PERFORMANCE LIST ................................................................................ 5 LAYOUT DIAGRAM & JUMPER SETTING ........................................... 6 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS..................................................... 8 2-2 CHECKING MOTHERBAORD'S JUMPER SETTING .......................... 8 2-3 INSTALL CPU ............................................................................................... 9 2-3-1 2-3-2 2-3-3 2-3-4 ABOUT PENTIUM & CELERONTM 370-PIN CPU ...............................9 SETTING CPU BUS CLOCK & MEMORY CLOCK JUMPER ............10 INSTALL CPU...............................................................................................11 OVERCLOCK RUNNING ...........................................................................11 2-4 INSTALL MEMORY .................................................................................... 14 2-5 EXPANSION CARD...................................................................................... 14 2-5-1 2-5-2 2-5-3 2-5-4 PROCEDURE FOR EXPANSION CARD INSTALLATION ..................14 ASSIGNING IRQ FOR EXPANSION CARD ............................................14 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD..........15 TV OUT SLOT...............................................................................................15 2-6 CONNECTORS, HEADERS ........................................................................ 16 2-6-1 CONNECTORS .............................................................................................16 2-6-2 HEADERS ......................................................................................................19 2-7 STARTING UP YOUR COMPUTER.......................................................... 22 CHAPTER 3 INTRODUCING BIOS 3-1 3-2 3-3 3-4 3-5 3-6 3-7 ENTERING SETUP....................................................................................... 23 GETTING HELP ........................................................................................... 24 THE MAIN MENU ........................................................................................ 24 STANDARD CMOS FEATURES ................................................................ 26 ADVANCED BIOS FEATURES .................................................................. 27 ADVANCED CHIPSET FEATURES .......................................................... 30 INTEGRATED PERIPHERALS.................................................................. 31 3-7-1 ONBOARD IDE FUNCTION.......................................................................32 3-7-2 ONBOARD PCI DEVICE.............................................................................33 3-7-3 WINBOND SUPERIO DEVICE ..................................................................34 i 3-8 POWER MANAGEMENT SETUP.............................................................. 35 3-8-1 RELOAD TIMER EVENTS .........................................................................37 3-9 3-10 3-11 3-12 3-13 PNP/PCI CONFIGURATION SETUP ........................................................ 38 PC HEALTH STATUS................................................................................. 39 FREQUENCY/VOLTAGE CONTROL .................................................... 40 LOAD STANDARD/OPTIMIZED DEFAULTS ....................................... 40 SET SUPERVISOR/USER PASSWORD................................................... 41 CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION MAGIC INSTALL SUPPORTS WINDOWS 95/98/98SE/NT4.0/2000 ............. 42 4-1 INF INSTALL INTEL 810E CHIPSET SYSTEM DRIVER ............................ 43 4-2 IDE INSTALL ULTRA ATA33 OR ULTRA ATA 66 DRIVER ....................... 44 4-3 VGA INSTALL ON-BOARD VGA DRIVER ................................................... 45 A. For WINDOWS 95/98/98SE/NT4.0 ................................................. 45 B. For WINDOWS 2000 ...................................................................... 45 4-4 PC-HEALTH INSTALLS PC HEALTH MONITOR IIII SOFTWARE FOR HARDWARE MONITORING DEVICE ................................... 47 4-5 AC97 SOUND DRIVER AND THE PROGRAM INSTALL FOR EDITING/PLAYBACK ................................................................................. 48 4-6 LAN (RTL8139C) INSTALL 10/100M PCI FAST ETHERNET DRIVER ........ 49 4-7 PC-CILLIN INSTALL PC-CILLI N98 ANTI-VIRUS PROGRAM.................. 50 4-8 HOW TO UTILIZE ALSRACK EDITING & PLAYBACK UTILITY... 51 4-9 HOW TO UTILIZE PC-HEALTH .............................................................. 52 4-10 HOW TO DISABLE ON-BOARD SOUND ................................................ 52 4-11 HOW TO UPDATE BIOS............................................................................ 52 ii USER'S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE 613DF MOTHERBOARD AND WE DO ASSURE THIS MANUAL MEETS USER'S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE). PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER'S BENEFIT, WITHOUT INTENT TO INFRINGE. 1 Manual Revision Information Reversion 1.0 Revision History First Release Date Oct 2000 Item Checklist 613DF Cable for IDE/Floppy ¡¼ CD for motherboard utilities Cable for USB Port 3/4 (Option) Cable for COM2 613DF User's Manual Intel Processor Family Thermal Solutions As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly crucial when building computer systems. Maintaining the proper thermal environment is key to reliable, long-term system operation. The overall goal in providing the proper thermal environment is keeping the processor below its specified maximum case temperature. Heatsinks induce improved processor heat dissipation through increased surface area and concentrated airflow from attached fans. In addition, interface materials allow effective transfers of heat from the processor to the heatsink. For optimum heat transfer, Intel recommends the use of thermal grease and mounting clips to attach the heatsink to the processor. When selecting a thermal solution for your system, please refer to the website below for collection of heatsinks evaluated and recommended by Intel for use with Intel processors. Vendor list for heatsink and fan of Pentium® !!! processor, please visit¡G http://developer.intel.com/design/Pentiumiii/components/index.htm Vendor list for heatsink and fan of Intel®CeleronTM processor, please visit¡G http://developer.intel.com/design/celeron/components/index.htm 2 Chapter 1 Introduction of 613DF Motherboard 1-1 Feature of motherboard The 613DF motherboard is design for use Intel's new generation Pentium processors, which utilize the Socket 370 design and the memory size expandable to 512Mb (using 128Mb technology). This motherboard integrated VGA, Audio, LAN, PC Health Function with Flex ATX form factor to support total solution for today's computer market. This motherboard use the newest Intel 810E chipset, whose 133MHz front side bus delivers a clear upgrade path to the future generation of 133MHz processors and PC-100/PC-133 SDRAM. The 613DF motherboard offers ULTRA DMA 66 (ATA 66) to provide speedier HDD throughout that boosts overall system performance. A digital video out interface to support optional LCD panel or TV-OUT display Card. The 613DF also has an integrated AC'97 2.1 CODEC on board which is fully compatible with Sound Blaster Pro that gives you the best sound quality and compatibility. 810E chipset includes integrated 3D Graphic Acceleration to provide a lower cost video display solution. With 2 USB control as well as capability of expanding to 4 USB connectors, the 613DF meet future USB demand also this motherboard has built-in hardware monitor function. This will monitor and protect your computer. This motherboard provides high performance & meets future specification demand. It is really wise choice for your computer. 3 1-2 Specification Spec Design Chipset Clock Generator Description FLEX ATX form factor 4 layers PCB size: 23.0 x 19.0 cm INTEL 810E Chipset Winbond W83194R-We Support 66/100/133MHz system Bus Clock (CPU Bus Clock) Support 100 MHz system memory clock Support 33MHz PCI Bus clock Support Pentium III 5001GHz processor Support Celeron 300733MHz processor Support 66, 100 and 133MHz CPU Bus clock Reserves support for future Intel Pentium III processors 168-pin DIMM socket x2 PC-100/PC-133 SDRAM Expandable to 512MB Support 3.3V SDRAM DIMM 32-bit PCI slot x1 AMR slot x1 LCD/TV out expansion slot x1 3D graphic acceleration 2 channel of Bus Master IDE port supporting ULTRA DMA 33/66 mode devices AC'97 Digital Audio controller integrated AC'97 Audio CODEC on board Audio driver and utility included On Board RTL8139C PCI LAN controller Support 10/100 Base T Transfer rate Monitoring CPU/System Temperature, FAN Speed, and System Voltage Award 4Mb Flash ROM PS/2 keyboard and PS/2 mouse connectors Floppy disk drive connector x1 Parallel port x1 Serial port x2 USB connector x2 USB headers x2 (connecting cable option) Audio connector (Line-in, Line-out/MIC & Game Port) Memory Socket Expansion Slot & Headers Integrate VGA Integrate IDE CPU Socket Audio LAN PC Health BIOS Multi I/O 4 1-3 Performance List The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Intel PIII 866MHz FC-PGA package CPU: 128M SDRAM x2 (Hyundai GM 72V66841ET75) DRAM: VGA Expansion Card: Geforce 256 (1024x768 Hi-color) Driver V3.68 Quantum Fireball KX20A11 Hard Disk Driver: Award Optimal default BIOS: Win 98SE OS: Performance Test Report Copermine 866MHz 3D Mark 99 3D Winbench 99 V1.2 3D Winbench 2000 Final Reality Winstone 99 V1.3 Winstone 2000 Winbench 99 : CPU Mark 99 FPU Winmark 99 Business Disk Winmark99 Hi-end Disk Winmark99 Business Graphic Winmark Hi-end Graphic Winmark Productivity ) 1660 301 5.33 5.25 30.8 31.9 69.7 4610 4970 17000 192 734 SYS Mark 2000 : SISMark 2000 Rating ( Internet Content Creation / Office Suites Offical SISOFT Sandra 2000 : CPU MIPS FPU MFLOPS MB/S MB/S CPU / Memory FPU / Memory 158 (160/157) 158 (159/157) 2357 1167 202 209 5 1-4 Layout & Jumper Setting PRINT PS/2 MOUSE LAN GAME/MIDI PORT PS/2 KEYBOARD USB COM1 VGA LINE-OUT LINE-IN MIC VG A U2 CO M2 C M1 O USB UL-B1 PS/2 MO USE & K/B KB&MS1 C M2 O G AME MIC LINE -IN LINE UT -O PRT1 W83627HF AMR 1 PRINT FAN2 J2 U8 FAN1 JP3 AMR JP2 TV O UT RTL8139 J4 J3 JP4 U12 U16 U3 IR 1 CPU 82801AA 82810E ZIF SO KET 370 C P2 U22 82802AB J5 IDE D TBLE RESET SPKR LE D JP15 TBSW PWRLE D DIMM1 JP14 + BT1 DIMM2 JP16 JP17 PWRBTN BATT. FDC 1 IDE 2 IDE1 FAN3 6 ATX PO RCO WE NN. USB PC 1 I Jumpers Jumper JP16, JP17, J5 JP4 JP2 JP14 Name CPU & SDRAM Frequency Setting Keyboard Power ON Function Setting Clear Keyboard Power On Password Setting CMOS RAM Clear Description 3-pin Block 3-pin Block 3-pin Block 3-pin Block Page p.8 p.8 p.9 p.9 Connectors Connector P2 KB&M ...