630TCF/630TCN USER'S MANUAL M/B For Pentium III Tualatin Processor NO. G03-630TCFR3A Release date: January 2002 Trademark: * Pentium is registered trademark and MMX is a trademark of Intel Corporation, the other names and brands are the property of their respective owners * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER'S NOTICE................................................................................ 1 MANUAL REVISION INFORMATION.............................................. 2 THERMAL SOLUTIONS.................................................................... 2 CHAPTER 1 INTRODUCTION OF 630TCF/630TCN MOTHERBOARD 1-1 1-2 1-3 1-4 FEATURE OF MOTHERBOARD ............................................... SPECIFICATION .................................................................... PERFORMANCE LIST ............................................................ LAYOUT DIAGRAM & JUMPER SETTING ................................ 3 4 5 6 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS ....................................... 8 2-2 CHECKING MOTHERBOARD'S JUMPER SETTING ................... 8 2-3 INSTALL CPU........................................................................ 10 2-3-1 ABOUT PENTIUM & CELERONTM 370-PIN CPU .................. 10 2-3-2 SETTING CPU BUS CLOCK & MEMORY CLOCK JUMPER ... 11 2-3-3 INSTALL CPU.................................................................. 12 2-3-4 OVERCLOCK RUNNING ................................................... 13 2-4 INSTALL MEMORY ............................................................... 14 2-5 EXPANSION CARD................................................................. 15 2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION........ 15 2-5-2 ASSIGNING IRQ FOR EXPANSION CARD ........................... 15 2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD . 16 2-6 CONNECTORS, HEADERS ...................................................... 16 2-6-1 CONNECTORS................................................................. 16 2-6-2 HEADERS ....................................................................... 19 2-7 STARTING UP YOUR COMPUTER ........................................... 22 CHAPTER 3 INTRODUCING BIOS 3-1 3-2 3-3 3-4 3-5 3-6 ENTERING SETUP ................................................................. 23 GETTING HELP..................................................................... 24 THE MAIN MENU .................................................................. 24 STANDARD CMOS FEATURES ................................................ 25 ADVANCED BIOS FEATURES.................................................. 27 ADVANCED CHIPSET FEATURES ........................................... 29 3-6-1 ADVANCED DRAM CONTROL .......................................... 30 3-7 INTEGRATED PERIPHERALS ................................................. 31 3-7-1 ONCHIP IDE FUNCTION................................................... 32 3-7-2 ONCHIP DEVICE FUNCTION ............................................ 33 3-7-3 WINBOND SUPERIO DEVICE ............................................ 34 i 3-8 POWER MANAGEMENT SETUP .............................................. 35 3-8-1 PM WAKE UP EVENTS ..................................................... 36 3-9 PNP/PCI CONFIGURATION SETUP .......................................... 37 3-9-1 IRQ RESOURCES ............................................................. 38 3-10 PC HEALTH STATUS............................................................. 39 3-11 FREQUENCY/VOLTAGE CONTROL ....................................... 39 3-12 LOAD STANDARD/OPTIMIZED DEFAULTS ............................. 40 3-13 SET SUPERVISOR/USER PASSWORD ...................................... 41 CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION MAGIC INSTALL SUPPORTS WINDOWS 95/98/98SE/NT4.0/2000 ........ 42 4-1 VGA INSTALL SIS 630 VGA DRIVER ................................. 43 4-2 PC-HEALTH WINBOND HARDWARE DOCTOR MONITORING SOFTWARE ........................................................ 45 4-2-1 HOW TO UTILIZE PC-HEALTH ......................................... 46 4-3 LAN (Only for 630TCF) INSTALL SIS 900 PCI FAST ETHERNET DRIVER 46 4-4 SOUND INSTALL SIS 7018 AC'97 AUDIO DRIVER AND APPLICATION SOFTWARE ...................................................47 4-5 PC-CILLIN INSTALL PC-CILLIN98 ANTI-VIRUS SOFTWARE AND APPLICATION PROGRAM .....................................................49 4-6 HOW TO DISABLE ON-BOARD SOUND .................................... 50 4-7 HOW TO UPDATE BIOS.......................................................... 50 ii USER'S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE 630TCF MOTHERBOARD AND WE DO ASSURE THIS MANUAL MEETS USER'S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE). PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER'S BENEFIT, WITHOUT INTENT TO INFRINGE. 1 Manual Revision Information Reversion 3.0 Revision History Third Edition Date January 2002 Item Checklist 630TCF/630TCN motherboard Cable for IDE/Floppy CD for motherboard utilities Cable for USB Port 3/4 (Option) 630TCF/630TCN User's Manual ¡¼ Intel Processor Family Thermal Solutions As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly crucial when building computer systems. Maintaining the proper thermal environment is key to reliable, long-term system operation. The overall goal in providing the proper thermal environment is keeping the processor below its specified maximum case temperature. Heatsinks induce improved processor heat dissipation through increased surface area and concentrated airflow from attached fans. In addition, interface materials allow effective transfers of heat from the processor to the heatsink. For optimum heat transfer, Intel recommends the use of thermal grease and mounting clips to attach the heatsink to the processor. When selecting a thermal solution for your system, please refer to the website below for collection of heatsinks evaluated and recommended by Intel for use with Intel processors. Vendor list for heatsink and fan of Pentium® !!! processor, please visit¡G http://developer.intel.com/design/Pentiumiii/components/index.htm Vendor list for heatsink and fan of Intel®CeleronTM processor, please visit¡G http://developer.intel.com/design/celeron/components/index.htm 2 Chapter 1 Introduction of 630TCF/630TCN Motherboard 1-1 Feature of motherboard The 630TCF/630TCN motherboard is design for use Intel's new generation Pentium processors, which utilize the Socket 370 design supports PentiumIII/Celeron Tualatin FC-PGA processors, and the memory size expandable to 1GB. This motherboard use the newest SiS 630T chipset provides a high performance/low cost solution for socket 370 series CPUs based system, by integrating a high performance North Bridge, advanced hardware 2D/3D GUI engine and Super-South Bridge. Moreover, by integrating the Ultra AGP technology and advanced 128-bit graphic display interface, SiS 630 delivers AGP 4X performance and up to 2GB/s memory bandwidth, and provides powerful hardware decoding DVD accelerator to improve the DVD playback performance. On-board VGA memory can selected from 2Mb to 64Mb. motherboard provides 10/10Mb Fast Ethernet interface for Office requirement and offers AC'97 compliant interface that comprises digital audio engine with 3Dhardware accelerator, on-chip sample rate converter. This motherboard also provides dual USB host controller with four USB Ports that deliver better connectivity and 2x12Mb bandwidth. The built-in Fast PCI IDE controller supports Ultra DMA 33/66/100 function up to 100MB/s for data transfer rate. In addition, 630TCF/ 630TCN provides hardware monitor function that will monitoring and protect your computer. This motherboard provides high performance & meets future specification demand. It is really wise choice for your computer. 3 1-2 Specification Spec Description (Only for 630TCF) Design Micro ATX form factor 4 layers PCB size: 24.5x19.0cm Chipset SiS 630T Chipset Clock Generator Support 66/100/133MHz system Bus Clock (CPU Bus Clock) Support 100/133 MHz system memory clock Support 33MHz PCI Bus clock CPU Socket Support Pentium III 5001.2GHz processor Support Celeron 533~1.0GHz processor Support 66, 100 and 133MHz CPU Bus clock Reserves support for future Intel Pentium III processors Memory Socket 168-pin DIMM socket x2 PC-100/PC-133 SDRAM Expandable to 1GB Support 3.3V SDRAM DIMM Expansion Slot 32-bit PCI slot x3, 2.2 Specification Compliant AMR slot x1 Integrate VGA 3D graphic acceleration VGA Memory Selectable by BIOS from 2MB to 64MB Integrate IDE 2 channel of Bus Master IDE port supporting ULTRA DMA 33/66/100 MB/s ATA100 mode devices Integrate LAN Fast Ethernet Controller 10/100 Mbps Audio AC'97 Digital Audio controller integrated AC'97 Audio CODEC on board Audio driver and utility included Award 2MB Flash ROM PS/2 keyboard and PS/2 mouse connectors Floppy disk drive connector x1 Parallel port x1 Serial port x2 USB connector x2 USB headers x2 (connecting cable option) Audio connector (Line-in, Line-out & Game Port) BIOS Multi I/O 4 1-3 Performance List The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) CPU: Intel PIII 866MHz FC-PGA package DRAM: 128M SDRAM x2 (Hyundai GM 72V66841ET75) VGA Expansion Card: On Board VGA (Driver V1.05) Hard Disk Driver: Quantum Fireball KX20A11 BIOS: Award Optimal default OS: Win 98SE Performance Test Report Share 8M Share 16M Share 32M 3D Mark 99 1908 1918 1912 3D Mark 2000 900 918 916 3D Winbench 99 V1.2 513 525 446 3D Winbench 2000 15.7 20.7 23 Final Reality 5.23 5.25 5.20 Winstone 99 V1.3 29.5 29.5 29.6 Winstone 2000 32.3 33 31.8 Winbench 99 : CPU Mark 99 67.1 68.1 68.5 FPU Winmark 99 4390 4390 4380 Business Disk Winmark99 4740 4550 4680 Hi-end Disk Winmark99 17100 16800 16300 Business Graphic Winmark 217 216 217 Hi-end Graphic Winmark 762 767 767 SYS Mark 2000 : SISMark 2000 Rating ( Internet Content Creation / Office Productivity ) Suites 156 157 157 Official 154 155 156 SISOFT Sandra 2000 : CPU MIPS 2262 2262 2262 FPU MFLOPS 1120 1120 1120 CPU / Memory MB/S 234 236 235 FPU / Memory MB/S 255 257 256 QUAKE3 : 5 DEMO1 DEMO2 FPS FPS 22.0 21.3 22.1 21.6 22.2 21.6 1-4 Layout Diagram & Jumper Setting LAN PS/2 MOUSE PS/2 Keyboard PRINT GAME/MIDI PORT USB COM1 VGA MIC LINE-IN LINE-OUT K/B Power On Jumper (JP9) PS/2 Mouse/KB Port USB/LAN Port CPU Socket (JP10, JP11) CPU F.S.B. Clock CPU FAN (JP2) CPU F.S.B. Clock ATX Power Connector Floppy Connector PC99 Back Panel PC133 DIMMX2 ATA 100 IDE Connector SiS 630T Chip CD Audio AMR Slot SYSTEM FAN (JP6) Clear CMOS Winbond 83697HF PCI Slot 2MBit Flash ROM BIOS COM2 Port Front Panel Connector IR Connector USB2 Port Wake On LAN 6 Jumpers Jumper JP2 JP10, JP11 JP9 JP6 Name CPU & SDRAM Frequency Setting Keyboard Power ON Function Setting CMOS RAM Clear Name ATX Power Connector PS/2 Mouse & PS/2 Keyboard Connector USB Port Connector LAN Port Connector Parallel Port Connector VGA Port Connector Audio/Game Connector Serial Port COM1 Connector Floppy Driver Connector Primary IDE Connector Secondary IDE Connector Description 2x4-pin Block 2x2-pin Block 3-pin Block 3-pin Block Description 20-pin Block 6-pin Female 2x4-pin Connector RJ45 Connector 25-pin Female 15-pin Female 3 phone jack + 15-pin Connector 9-pin Connector 34-pin Block 40-pin Block 40-pin Block Page p.8 p.9 p.9 Page p.16 p.17 p.17 p.17 p.17 p.17 p.17 p.17 p.17 p.18 p.18 Connectors Connector ATX KB/MOUSE USB LAN (for 630TCF) PRINT VGA GAME COM1 FDD IDE1 IDE2 Headers Header COM2 USB2 HDLED TBLED RST KEYLOCK SPKR PWR LED PWR WOL CPUFAN SYSFAN IR, CIR CDIN1, CDIN2 AUX-IN Name COM2 Headers USB Port Headers IDE activity LED Turbo LED switch Reset sw ...