815EDA/815EDAL 815EPDA/815EPDAL USER'S MANUAL M/B For Socket 370 Pentium III Processor NO. G03-815EDA1A Release date: July 2002 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER'S NOTICE...........................................................................................................................1 MANUAL REVISION INFORMATION..........................................................................................1 THERMAL SOLUTIONS ................................................................................................................1 CHAPTER 1 INTRODUCTION OF MOTHERBOARD 1-1 FEATURE OF MOTHERBOARD .......................................................................................2 1-2 SPECIFICATION ..................................................................................................................3 1-3 PERFORMANCE LIST.........................................................................................................4 1-4 LAYOUT DIAGRAM & JUMPER SETTING....................................................................5 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS..............................................................................7 2-2 CHECKING MOTHERBOARD'S JUMPER SETTING ...................................................7 2-3 INSTALL CPU .......................................................................................................................9 2-3-1 GLOSSARY ................................................................................................................9 2-3-2 SETTING CPU BUS CLOCK & MEMORY CLOCK JUMPER..........................10 2-3-3 INSTALL CPU............................................................................................................10 2-3-4 OVERCLOCK RUNNING ........................................................................................11 2-4 INSTALL MEMORY.............................................................................................................12 2-5 EXPANSION CARDS ............................................................................................................13 2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION................................13 2-5-2 ASSIGNING IRQ FOR EXPANSION CARD..........................................................13 2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD........................14 2-5-4 AGP SLOT ..................................................................................................................14 2-6 CONNECTORS, HEADERS.................................................................................................15 2-6-1 CONNECTORS ..........................................................................................................15 2-6-2 HEADERS ...................................................................................................................17 2-7 STARTING UP YOUR COMPUTER ..................................................................................20 CHAPTER 3 INTRODUCING BIOS 3-1 ENTERING SETUP ...............................................................................................................21 3-2 GETTING HELP....................................................................................................................21 3-3 THE MAIN MENU ................................................................................................................22 3-4 STANDARD CMOS FEATURES.........................................................................................23 3-5 ADVANCED BIOS FEATURES...........................................................................................24 3-6 ADVANCED CHIPSET FEATURES...................................................................................26 3-6-1 SDRAM TIMING SETTING.....................................................................................27 3-7 INTEGRATED PERIPHERALS ..........................................................................................28 3-7-1 ON-CHIP IDE FUNCTION.......................................................................................29 3-7-2 ON-CHIP SIO FUNCTION .......................................................................................29 3-7-3 ON-CHIP DEVICE FUNCTION...............................................................................30 3-8 POWER MANAGEMENT SETUP ......................................................................................31 3-9 PNP/PCI CONFIGURATION SETUP .................................................................................33 3-10 PC HEALTH STATUS.........................................................................................................34 3-11 MISCELLANEOUS CONTROL.........................................................................................35 3-12 LOAD STANDARD/OPTIMIZED DEFAULTS................................................................35 3-13 SET SUPERVISOR/USER PASSWORD ...........................................................................36 CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION MAGIC INSTALL SUPPORTS WINDOWS 95/98/98SE/NT4.0/2000 ........................................37 4-1 INF INSTALL INTEL 815 CHIPSET SYSTEM DRIVER ................................38 4-2 IDE INSTALL INTEL ULTRA ATA STORAGE DRIVER ...............................39 4-3 VGA INSTALL ON-BOARD VGA DRIVER........................................................40 4-4 SOUND AC97 SOUND DRIVER AND THE PROGRAM INSTALL FOR EDITING/PLAYBACK..................................................................................40 4-5 LAN INSTALL VIA VT6105 RHINE III LAN CONTROLLER DRIVER ..........41 4-6 PC-HEALTH WINBOND HARDWARE DOCTOR MONITORING SOFTWARE......42 4-7 MAGIC BIOS INSTALL BIOS LIVE UPDATE UTILITY ..........................................43 4-8 PC-CILLIN INSTALL PC-CILLIN 2002 ANTI-VIRUS PROGRAM.....................45 4-9 HOW TO DISABLE ON-BOARD SOUND .........................................................................46 4-10 HOW TO UPDATE BIOS .....................................................................................................46 i USER'S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD AND WE DO ASSURE THIS MANUAL MEETS USER'S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE). PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER'S BENEFIT, WITHOUT INTENT TO INFRINGE Manual Revision Information Reversion 1.0 Revision History First Release Date July 2002 Item Checklist Motherboard Cable for IDE/Floppy CD for motherboard utilities Cable for USB Port 3/4 (Option) Cable for COM2 (Option) User's Manual Intel Processor Family Thermal Solutions As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly crucial when building computer systems. Maintaining the proper thermal environment is key to reliable, long-term system operation. The overall goal in providing the proper thermal environment is keeping the processor below its specified maximum case temperature. Heatsinks induce improved processor heat dissipation through increased surface area and concentrated airflow from attached fans. In addition, interface materials allow effective transfers of heat from the processor to the heatsink. For optimum heat transfer, Intel recommends the use of thermal grease and mounting clips to attach the heatsink to the processor. When selecting a thermal solution for your system, please refer to the website below for collection of heatsinks evaluated and recommended by Intel for use with Intel processors. Vendor list for heatsink and fan of Pentium® III processor, please visit http://developer.intel.com/design/Pentiumiii/components/index.htm Vendor list for heatsink and fan of Intel® CeleronTM processor, please visit http://developer.intel.com/design/celeron/components/index.htm 1 Chapter 1 Introduction of 815EDA/815EDAL/815EPDA/815EPDAL Motherboard 1-1 Feature of motherboard The motherboard is design for use Intel's new generation Pentium III /Tualatin processors, which utilize the Socket 370 design and the memory size expandable to 512MB. This motherboard use the newest Intel chipset, whose 133MHz front side bus & 133MHz memory interface delivers a clear upgrade path to the future generation of 133MHz processors and PC-133 SDRAM. It offers ULTRA DMA 100MB/sec (ATA 100) to provide speedier HDD throughout that boosts overall system performance. 815EDA/815EDAL with integrated 3D Graphic Accelerator, makes this board lower cost alternative to a video card. For those wanting even greater graphic performance, an AGP 4X slot is included on the board. This AGP slot will support either a 1X, 2X, 4X AGP VGA card. The 815EDAL/815EPDAL integrated PCI LAN controller supports IEE802.3 standard provide 10/100 Mb/s data transfer rate for network. The motherboard integrated AC'97 2.1 CODEC on board which is fully compatible with Sound Blaster Pro that gives you the best sound quality and compatibility. With 2 USB control as well as capability of expanding to 4 USB connectors, which guarantees this board to meet future USB demand. Moreover, these motherboards have built-in hardware monitor function that capable of monitor and protect your computer. The motherboard also provides special function in BIOS Setup to setting CPU Host clock step by step increasing let users to approach over clocking. This motherboard provides high performance & meets future specification demand. It is really wise choice for your computer. 1-2 Specification 2 Spec Design Chipset Description ATX form factor 4 layers PCB size: 30.5x17.0cm Intel 815E B-Step Graphic Memory Controller Hub (GMCH) Chipset for 815EDA/815EDAL Intel 815EP B-Step Memory Controller Hub (MCH) Chipset for 815EPDA/815EPDAL Intel 82801BA I/O Controller Hub (ICH) chipset Support Pentium III 5001.2GHz processor Support CeleronTM 500~1.4GHz processor Support 66, 100 and 133MHz CPU Bus clock Reserves support for future Intel Pentium III processors 168-pin DIMM socket x2 Expandable to 512MB Support 3.3V PC-100/PC-133 SDRAM Module AGP slot x1 support AGP 2.0 & 4X mode 32-bit PCI slot x5 CNR slot x1 VIA PCI LAN Controller chip Support 10/100 Mb/s data transfer rate compliant IEE 802.3 standard 3D graphic acceleration Intel GMCH Built-in Graphics supports up to 1280x1024x24 bits 85Hz 2 channel of Bus Master IDE port supporting ULTRA DMA 33/66/100 mode devices AC'97 Digital Audio controller integrated AC'97 Audio CODEC on board Audio driver and utility included Award 2Mb Flash ROM PS/2 keyboard and PS/2 mouse connectors Floppy disk drive connector x1 Parallel port x1, Serial Port x2 USB connector x2 and USB headers x2 (connecting cable option) Audio connector (Line-in, Line-out, MIC & Game Port) CPU Socket Memory Socket Expansion Slot & Headers LAN On Board (Only for 815EDAL/815EPDAL) Integrate VGA (Only for 815EDA/815EDAL) Integrate IDE AC'97Audio BIOS Multi I/O 1-3 Performance List 3 The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Intel PIII 866MHz FC-PGA package CPU: 128M SDRAM x2 (Hyundai GM 72V66841ET75) DRAM: VGA Expansion Card: Geforce 256 (1024x768 Hi-color) Driver V3.68 Quantum Fireball KX20A11 Hard Disk Driver: Award Optimal default BIOS: Win 98SE OS: A: On Board VGA B: With expansion VGA Card (Geforce 256) Performance Test Report 3D Mark 99 3D Mark 2000 3D Winbench 99 V1.2 3D Winbench 2000 Final Reality Winstone 99 V1.3 Winstone 2000 Winbench 99 : CPU Mark 99 76.7 78.6 FPU Winmark 99 4620 4610 Business Disk Winmark99 5190 5210 Hi-end Disk Winmark99 17800 17900 Business Graphic Winmark 219 399 Hi-end Graphic Winmark 776 1100 SYS Mark 2000 : SISMark 2000 Rating ( Internet Co ...