830CN/830CH/830CF USER'S MANUAL M/B For Socket-A Athlon/Duron Processor NO. G03-830CNR5A Release date: November 2001 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are to change at any time without notice, and should not be construed as a commitment by manufacturer. subject TABLE OF CONTENT USER'S NOTICE ............................................................................. 1 MANUAL REVISION INFORMATION ............................................. 2 THERMAL SOLUTIONS ................................................................... 2 CHAPTER 1 INTRODUCTION OF 830CN/830CH/830CF MOTHERBOARD 1-1 1-2 1-3 1-4 FEATURE OF MOTHERBOARD............................................................... 3 SPECIFICATION .......................................................................................... 4 PERFORMANCE LIST ................................................................................ 5 LAYOUT DIAGRAM & JUMPER SETTING ........................................... 7 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS..................................................... 9 2-2 CHECKING MOTHERBOARD'S JUMPER SETTING .......................... 9 2-3 INSTALL CPU ............................................................................................... 10 2-3-1 GLOSSARY ........................................................................................ 10 2-3-2 ABOUT AMD ATHLON & DURON 462-PIN CPU....................... 11 2-3-3 OVERCLOCK RUNNING................................................................ 12 2-4 INSTALL MEMORY .................................................................................... 13 2-5 EXPANSION CARD...................................................................................... 14 2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION....... 14 2-5-2 ASSIGNING IRQ FOR EXPANSION CARD................................. 14 2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD... 15 2-5-4 AGP SLOT .......................................................................................... 15 2-6 CONNECTORS, HEADERS ........................................................................ 16 2-6-1 CONNECTORS .................................................................................. 16 2-6-2 HEADERS........................................................................................... 19 2-7 STARTING UP YOUR COMPUTER.......................................................... 23 CHAPTER 3 INTRODUCING BIOS ENTERING SETUP....................................................................................... 24 GETTING HELP ........................................................................................... 25 THE MAIN MENU ........................................................................................ 25 STANDARD CMOS FEATURES ................................................................ 26 ADVANCED BIOS FEATURES .................................................................. 28 ADVANCED CHIPSET FEATURES .......................................................... 30 3-6-1 DRAM TIMING SETTINGS ............................................................ 31 3-6-2 AGP FUNCTION SETTING............................................................. 32 3-7 INTEGRATED PERIPHERALS.................................................................. 32 3-7-1 ONCHIP IDE FUNCTION................................................................ 33 3-1 3-2 3-3 3-4 3-5 3-6 i 3-8 3-9 3-10 3-11 3-12 3-13 3-7-2 ONCHIP DEVICE FUNCTION ....................................................... 34 3-7-3 ONBOARD SUPERIO FUNCTION................................................. 35 POWER MANAGEMENT SETUP.............................................................. 36 3-8-1 PM WAKE UP EVENTS ................................................................... 37 PNP/PCI CONFIGURATION SETUP ........................................................ 38 3-9-1 IRQ RESOURCES ............................................................................. 39 PC HEALTH STATUS................................................................................. 39 MISCELLANEOUS CONTROL ............................................................... 40 LOAD STANDARD/OPTIMIZED DEFAULTS ....................................... 40 SET SUPERVISOR/USER PASSWORD................................................... 41 CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION MAGIC INSTALL SUPPORTS WINDOWS 95/98/98SE/NT4.0/2000 ............. 42 4-1 AGPVXD INSTALL SIS 630/730 AGPVXD DRIVER ............................. 43 4-2 VGA INSTALL SIS 630/730 VGA DRIVER .................................... 44 4-3 SOUND INSTALL SIS 7018 AC'97 AUDIO DRIVER AND APPLICATION SOFTWARE.................................................... 45 4-4 LAN INSTALL SIS 900 PCI FAST ETHERNET DRIVER............... 47 4-5 LANLED INSTALL SIS 900 LAND STATE UTILITY............................. 48 4-6 PC-HEALTH WINBOND HARDWARE DOCTOR MONITORING SOFTWARE .......................................................................... 48 4-6-1 HOW TO UTILIZE PC-HEALTH................................................... 49 4-7 MAGIC BIOS INSTALL BIOS LIVE UPDATE UTILITY ............................... 50 4-8 PC-CILLIN INSTALL PC-CILLIN 2000 ANTI-VIRUS PROGRAM ............ 51 4-9 HOW TO DISABLE ON-BOARD SOUND ................................................ 53 4-10 HOW TO UPDATE BIOS............................................................................ 53 ii USER'S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE 830CN/830CH/ 830CF MOTHER-BOARD AND WE DO ASSURE THIS MANUAL MEETS USER'S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE). PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER'S BENEFIT, WITHOUT INTENT TO INFRINGE. 1 Manual Revision Information Reversion 5.0 Revision History Fifth Edition Date November 2001 Item Checklist 830CN/830CH/830CF Motherboard Cable for IDE/Floppy CD for motherboard utilities Cable for USB Port 3/4 (Option) 830CN/830CH/830CF User's Manual AMD AthlonTM / DuronTM Processor Family Cooling Solutions As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly crucial when building computer systems. Maintaining the proper thermal environment is key to reliable, long-term system operation. The overall goal in providing the proper thermal environment is keeping the processor below its specified maximum case temperature. Heatsinks induce improved processor heat dissipation through increased surface area and concentrated airflow from attached fans. In addition, interface materials allow effective transfers of heat from the processor to the heatsink. For optimum heat transfer, AMD recommends the use of thermal grease and mounting clips to attach the heatsink to the processor. When selecting a thermal solution for your system, please refer to the website below for collection of heatsinks evaluated and recommended by AMD for use with AMD processors. Note, those heatsinks are recommended for maintaining the specified Maximum T case requirement. In addition, this collection is not intended to be a comprehensive listing of all heatsinks that support AMD processors. For vendor list of heatsink and fan, please visit http://www1.amd.com/products/duron/thermals http://www1.amd.com/products/athlon/thermals Chapter 1 2 Introduction of 830CN/830CH/830CF Motherboard 1-1 Feature of motherboard The 830CN/830CH/830CF motherboard is design for use AMD Athlon / Duron processors, which utilize the Socket A design and the memory size expandable to 1GB. This motherboard use the newest SiS 730S chipset, whose front side bus (133MHz/ 266MHz (DDR) for 830CH/830CF/830CN. Provides a high performance/low cost solution for Socket A series CPUs based system, by integrating a high performance North Bridge, advanced hardware 2D/3D GUI engine and Super-South Bridge. Moreover, by integrating the Ultra AGP technology and advanced 128-bit graphic display interface, SiS 730S delivers AGP 4X performance and up to 2GB/s memory bandwidth, and provides powerful hardware decoding DVD accelerator to improve the DVD playback performance. On-board VGA memory can select from 8Mb to 64Mb. 830CH/830CF provides 4x Mode AGP slot support 4X AGP card for those wanting even greater graphic performance. However, due to chipset's specification, on board AGP slot supports n-Vidia TNT series VGA card only. 830CF also support 10/100 Mb Fast Ethernet controller for office requirement. This motherboard provides AC'97 compliant interface that comprises digital audio engine with 3D-hardware accelerator, on-chip sample rate converter. This motherboard also provides dual USB host controller with four USB Ports that deliver better connectivity and 2x12Mb bandwidth. The built-in Fast PCI IDE controller supports Ultra DMA 33/66/100 function up to 100MB/s for data transfer rate. In addition, 830CN/830CH/830CF provides hardware monitor function that will monitoring and protects your computer. The 830CN/830CH/830CF motherboard provides special function in BIOS Setup to setting CPU Host clock step by step increasing let users to approach over clocking. This motherboard provides high performance & meets future specification demand. It is really wise choice for your computer. 1-2 Specification Spec Description 3 Design Chipset Clock Generator CPU Socket Micro ATX form factor 4 layers PCB size: 24.4x21.0cm SiS 730S Chipset for 830CN/830CH/830CF Support 100/133MHz Front Side Bus Clock (CPU Bus clock) Support 100/133MHz system memory clock Support 33MHz PCI Bus clock Support AMD Athlon 600MHz1.33GHz processor Support AMD Duron 600MHz850MHz processor Support 100/133 MHz CPU Bus clock Support 266MHz DDR (Double Data Rate) F.S.B. (for 830CN /830CH/830CF) Memory Socket Expansion Slot Integrate VGA Integrate IDE Integrate LAN (Only for 830CF) Reserves support for future AMD Athlon/Duron processors 168-pin DIMM socket x2 PC-100/PC-133 SDRAM Expandable to 1GB Support 3.3V SDRAM Module 32-bit PCI slot x3, 2.2 Specification Compliant CNR slot x1 support Audio, Modem only AGP Slot x1 (Only for 830CH/830CF) 3D graphic acceleration VGA Memory Selectable by BIOS from 8MB to 64MB Two PCI IDE controllers support PCI Bus Mastering, ATA PIO/DMA and the ULTRA DMA 33/66/100 functions that deliver the data transfer rate up to 100 MB/s Fast Ethernet Controller 10/100 Mbps AC'97 Digital Audio controller integrated AC'97 Audio CODEC on board Audio driver and utility included Award 2MB Flash ROM PS/2 keyboard and PS/2 mouse connectors Floppy disk drive connector x1 Parallel port x1 Serial port x2 USB connector x2,USB headers x2 (connecting cable option) Audio connector (Line-in, Line-out, MIC & Game Port) Audio BIOS Multi I/O 1-3 Performance List 4 The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) AMD K7 900MHz FC-PGA package CPU: 128M SDRAM x2 (Hyundai GM 72V66841ET75) DRAM: VGA Expansion Card: On Board VGA IBM DTLA-305040 (ATA-100) Hard Disk Driver: Award Optimal default BIOS: Win 98SE OS: Performance Test Report Share 8M Share 16M Share 32M 3D Mark 99 1712 1708 1711 3D Mark 2000 754 711 733 3D Winbench 99 V1.2 469 475 476 3D Winbench 2000 16.1 18.8 19.8 Final Reality 5.04 5.02 5.00 Winstone 99 V1.3 28.7 28.5 28.7 Content Creation Winstone 2000 34.6 32.5 33.9 Content Creation Winstone 2001 38.2 37.6 36.7 Business Winstone 2001 32.1 31.9 31.7 Winbench 99 : CPU Mark 99 70.8 70.7 70.6 FPU Winmark 99 4810 4810 4800 Business Disk Winmark99 4570 4500 4630 Hi-end Disk Winmark99 16600 16500 17000 Business Graphic Winmark 208 227 227 Hi-end Graphic Winmark 675 886 884 SYS Mark 2000 : SISMark 2000 Rating ( Internet Content Creation / Office Productivity ) Suites 152 (154/151) 153 (153/153) 153 (154/153) Official 152 (155/149) 153 (153/153) 153 (155/152) SISOFT Sandra 2000 : CPU MIPS 2774 277 ...