920BF/920BN USER'S MANUAL 3D-AGP VGA / 3D-Audio M/B FOR Pentium II / III The author assumes no responsibility for any errors or omissions which may appear in this document nor does it make a commitment to update the information contained herein. NO. G03-920BFR3A Release date: DEC 2000 ** Year 2000 compliant ** Trademark: * Pentium is registered trademark and MMX is a trademark of Intel corporation, the other names and brands are the property of their respective owners. * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT Chapter 1 1-1 Preface ...................................................................................................1 1-2 Key Feature ............................................................................................1 Chapter 2 Hardware Installation..................................................................................3 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 Unpacking...............................................................................................3 Motherboard Diagram .............................................................................4 Quick Reference for Jumpers, Connectors & Expansion Socket.............5 Installation Steps ....................................................................................6 Jumper Settings ......................................................................................6 System Memory (DRAM) ........................................................................8 Central Processing Unit (CPU) ...............................................................8 Expansion Cards.....................................................................................11 External Connectors ...............................................................................12 Chapter 3 AWARD BIOS SETUP ..................................................................................18 3-1 STANDARD CMOS SETUP ...................................................................18 3-2 BIOS FEATURES SETUP ......................................................................19 3-3 CHIPSET FEATURES SETUP ...............................................................22 3-4 POWER MANAGEMENT SETUP ..........................................................23 3-5 PnP/PCI CONFIGURATION SETUP ......................................................25 3-6 LOADING BIOS DEFAULTS ...................................................................26 3-7 LOADING SETUP DEFAULTS ................................................................26 3-8 INTEGRATED PERIPHERALS SETUP...................................................27 3-9 SUPERVISOR/USER PASSWORD ........................................................28 3-10 IDE HDD AUTO DETECTION ...............................................................28 3-11 SAVE & EXIT SETUP ............................................................................29 3-12 EXIT WITHOUT SAVING ......................................................................29 Chapter 4 4-1 PC HEALTH MONITOR-II SOFTWARE ....................................................30 4-2 Sound Card Driver Quick Installation..........................................................30 APPENDIX-A Magic Install i Chapter 1 1-1 Preface Thank you for purchasing this multifunction motherboard. It has the most flexibility you can find in today's computer market. This board integrates both Intel Pentium®II /Pentium®III & CeleronTM(Slot 1) / Coppermine processor and CeleronTM (Socket 370) PPGA / FCPGA processor interface into a compact PC/AT compatible system along with share memory type 3D AGP VGA on-board, 3D PCI Audio on-board to support 4 channels speaker(If on-board embedded Audio chip only), Ultra DMA 66, ACPI/AMP power management, and many other powerful functions. 1-2 Key Feature This motherboard is design for the PC user who wants highest possible quality and value in a small package. It includes following main features: · Supports both Slot 1 & Socket 370 CPU interface (only for one CPU interface at a time). · Supports Jumpless solution for setting of Front Side Bus Frequency (CPU Host Clock),and CPU ratio in BIOS SETUP "CHIPSET FEATURES SETUP". · Multi-Speed Support : Provides 66/75/83/95/100MHz Front Side Bus Frequency to support Intel PentiumII / PentiumIII / Coppermine / Celeron processor processor for slot1 interface or Intel Celeron PPGA / FCPGA or a ZIP Socket 370 interface. · Built-In High performance 3D AGP VGA: Support share memory 2MB to 8MB selectable in BIOS SETUP. Integrated programmable 24-bit true-color RAMDAC up to 230MHz pixel clock. Integrated two 96x64 video line buffers for MPEG video playback. Support 64 bit memory data bus interface; Support DIC, Direct Draw Driver. Integrated a high performance and high quality 3D engine. Support AGP Spec.1.0 compliant, 1xmode(66MHz), 2xmode(133MHz) The VGA Share Memory Size can be 2MB/4MB/8MB selectable in the "INTEGRATED PERIPHERALS Setup " under BIOS Setup. · Built in high quality PCI-Based HRTF 3D Extension Positional Audio Chip (Option for motherboard that embedded Audio chip): Supports rear side speakers, C3DX positional audio in 4 channels speaker mode. Professional digital audio interface to support 24-bit SPDIF IN and OUT (44.1K and 48K format). HRTF-base 3D positional audio, supporting DirectSoundTM 3D and Aural A3DTM interface. Digital functions that capable to provide hi-fi stereo, Dolby, 3D surround effects, and playing MP3 music. · You can add our Optical Kit (Option for motherboard that embedded Audio chip) to connect any optical Input/Output device for super high quality sound transaction, such as playing & recording MD(Mini Disk)/CD; CD-ROM directly recording to MD; 1 · · · · · · · · · · · · · combine with DVD player to create a home theater system (This upgrade kit includes Optical Module, Optical Cable, and Software DVD Driver). Chipset: SiS 620/5595 AGPset chip with I/O subsystems; CMI 8738 3D PCI Audio chip (Option for motherboard that embedded Audio chip). DRAM Memory Support: supports 2 168-pin DIMMS(3.3V)from a memory size befween 16MB to 1.0GB. ISA and PCI expansion Slots: Three PCI slots ,Privodes one 16-bit ISA slot. Super Multi-I/O: Provides two high-Speed UART compatible serial ports and one parallel port with EPP and ECP capabilities. Two floppy drives of either 5.25" or 3.5" (1.44MB or 2.88MB) are also supported without an external card. PCI Bus Master IDE Controller and ULTRA DMA 33/66: On-board PCI Bus Master IDE controller with two connectors that supports four IDE devices in two channels, provides faster data transfer rates, and supports Enhanced IDE devices such as Tape Backup, CDROM drives and LS-120. This controller also supports PIO Modes 3 and 4 and Bus Master IDE DMA 33/66Mbyte/Second. ACPI supporting for OS Directed Power Management Keyboard Power On: When use ATX power supply and JP1 1-2 closed,choose power on function by password in BIOS , can control power supply on by keyboard instead of power button . Ring-in Wake up: When Ring-In the system can wake up from SMI Mode. Ring-in Power On: When Ring-In the system can power on automatic by this function by use of ATX power supply. RTC Power On: When use of ATX power supply and Enabled RTC Power On function, you can setting RTC alarm to power on the system at the time length you setting . Power Button: Press the button will place the system power on/off when use ATX power supply . Software off when use ATX power supply. Power Support: Efficient PWM switching power instead of traditional Linear Voltage Regulator to prevent power component from being burned-out. Meets PC99 Requirements. Optional IRDA and PS/2 Mouse Connector: This motherboard supports an dedicated 16C550 standard UART,supporting infrared communication module for wireless interface and PS/2 mouse cable set. Optional USB DEVICE Connector: This motherboard supports two USB port connectors for USB devices. DMI Function Supporting. PC Health Monitoring : Allows you track PC's CPU temperature, system voltage and fan speed. When current temperature over warning temperature, the system will warning you by alarm. Baby AT Form Factor: Dimensions 22cm x 25cm. Chapter 2 2 Hardware Installation 2-1 Unpacking This mainboard package should contain the following: · · · · The mainboard USER'S MANUAL for mainboard Cable set for Ultra DMA 33 IDE x1, Floppy x1, COM1 & COM2 x1, LPT x1, VGA x1, Audio and Game x1(For motherboard that embedded Audio chip) CD for Drivers PACK The mainboard contains sensitive electronic components which can be easily damaged by electron-static, so the mainboard should be left in its original packing until it is installed. Unpacking and installation should be done on a grounded anti-static mat. The operator should be wearing an anti static wristband, grounded at the same point as the anti-static mat. Inspect the mainboard carton for obvious damage. Shipping and handling may cause damage to your board. Be sure there are no shipping and handling damages on the board before proceeding. After opening the mainboard carton, extract the system board and place it only on a grounded anti-static surface component side up. Again inspect the board for damage. Press down on all of the socket IC's to make sure that they are properly inserted. Do this only on with the board placed on a firm flat surface. Warning: Do not apply power to the board if it has been damaged. You are now ready to install your mainboard. The mounting hole pattern on the mainboard matches the Baby AT system board. It is assumed that the chassis is designed for a Baby AT main board mounting. Place the chassis on the anti-static mat and remove the cover. Take the plastic clips, Nylon stand-off and screws for mounting the system board, and keep them separate. 2-2 Motherboard Diagram 3 CPUFAN ATKB MS PIN1 U3 COM2 COM1 JP1 U2 GAME SPKIN1 AUDIO LPT1 VGA PW2 PW1 SLOT1 IR JP5 JP4JP3 U5 ISA1 SPDIFOUT CPU JP7 USB U13 SIS 5595 WOL JP8 BT1 BATT SIS 620 J5 DIMM1 DIMM2 DIMM1 DIMM2 IDE2 JP9 KEYLOCK TBSW SMI IDE1 FLO PPY Figure 2-1 SPEK RST TBLED HDLED PS/ON Optional connector for motherboard that embedded wit Audio Chip 2-3 Quick Reference for Jumpers, Connectors & Expansion Socket Jumpers Jumper Name Description Page 4 SLO T-1 JP6 PGA 370 SYSFAN SPDIFIN PCI3 PCI2 PCI1 BIOS U14-7 U14-7 JP8 J5 JP1 JP9 CPU Bus Frequency Selection CMOS RAM Clear On board VGA Enabled/Disabled Keyboard power on function VIO Voltage Selection Open:100MHZ(off), Closed:66MHz(on) 1-2 Clear CMOS, 2-3 Normal open : Enabled,closed : Disabled 1-2 : Enabled , 2-3 : Disabled 1-2 : 3.45V , 2-3 : 3.52V p.6 p.7 p.7 p.7 p.7 Connectors Connector PW1 PW2 ATKB MS_PIN1 LPT1 COM1,COM2 FDD IDE1 IDE2 HDLED FPC IR USB CPUFAN,SYSFAN PS-ON VGA WOL Name AT Power Connector ATX Power Connector Keyboard Connector PS/2 Mouse Connector Parallel Port Connector Serial Port COMA & COMB Floppy Driver Connector Primary IDE Connector Secondary IDE Connector IDE activity LED Front Panel Connector Infrared Module Connector USB Port Connector FAN Connector ATX power button/soft power button VGA Connector Wake On Lan Description 12-Pin Block 20-Pin Block 5-Pin Female 5-Pin Block 26-Pin Block 10-Pin Block 34-Pin Block 40-Pin Block 40-Pin Block 2-Pin Connector 16-Pin Block 5-Pin Block 10-Pin Block Fanning system connectors 2-Pin Connector 16-Pin Block 3-pin Block Page p. 12 p. 12 p.12 p.12 p.13 p.13 p.13 p.14 p.14 p.14 p.14 p.15 p.15 p.15 p.15 p.16 p.16 Jumpers & Connectors (Option for motherboard that embedded Audio Chip) Item number JP6 Audio Game JP3 JP4 JP5 SPDIFIN SPDIFOUT JP7 Name Audio Chip Enabled/Disabled Line IN / Line OUT / MIC Game port Connector CD-Audio IN CD-Audio IN AUX IN SPDIN(Sony/Philips Digital Interface) IN SPDIN(Sony/Philips Digital Interface) OUT For Optional Optical Kit Connector Description 1-2 Enabled, 2-3 Disabled 10-pin Connector 16-pin Connector 4-pin Block 4-pin Block 4-pin Block 4-pin Block 4-pin Block 10-pin Block Page p.7 p.16 p.16 p.17 p.17 p.17 p.17 p.17 p.17 Expansion Sockets Socket/Slot Slot1 Zip Socket 370 DIMM1,DIMM2 PCI1, PCI2, PCI3 ISA1 CPU Slot CPU Socket DIMM Module Socket PCI Slot ISA Slot Name Description PentiumII/III/Coppermine CPU Slot Celeron PPGA / FCPGA CPU Socket 168-Pins DIMM SDRAM Module Expansion Socket 32-bits PCI Local Bus Expansion slots 16-bits ISA Bus Expansion slot Page p.8 p.9 p.9 p.11 p.11 2-4 Installation Steps Before using your computer, you must follow the steps as follows: 1. Set Jumpers on the Motherboard 5 2. 3. 4. 5. Install the CPU Install DRAM Modules Install Expansion card Connect Cables, Wires, and Power Supply 2-5 Jumper Settings 1. CPU Bus Frequency Selection : U14-7 U14-7 66MHz : Closed 100MHz : Open ...