994AN/994AN-L 994AS/994AS-L USER'S MANUAL PCI/ AGP Mainboard For Pentium II/ III or Socket 370 The author assumes no responsibility for any errors or omissions which may appear in this document nor does it make a commitment to update the information contained herein. NO. G03-994ANR4A Release date: NOV 2000 ** Year 2000 compliant ** Trademark: * Pentium is registered trademark and MMX is a trademark of Intel corporation, the other names and brands are the property of their respective owners. * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT Chapter 1 1-1 Preface............................................................................................................. 1 1-2 Feature of motherboard.................................................................................... 1 1-2-1 Overview.............................................................................................. 1 1-2-2 Key Feature ......................................................................................... 2 Chapter 2 Hardware Installation.................................................................................. 3 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 Unpacking ........................................................................................................ 3 Mainboard Diagram .......................................................................................... 4 Quick Reference for Jumpers, Connectors & Expansion Socket ....................... 5 Installation Steps.............................................................................................. 6 Jumper Settings ............................................................................................... 6 System Memory (DRAM).................................................................................. 7 Central Processing Unit (CPU) ......................................................................... 7 Expansion Cards .............................................................................................. 10 External Connectors......................................................................................... 11 Chapter 3 AWARD BIOS SETUP.................................................................................. 17 3-1 STANDARD CMOS FEATURES ...................................................................... 18 3-2 ADVANCED BIOS FEATURES ........................................................................ 19 3-3 ADVANCED CHIPSET FEATURES ................................................................. 21 3-4 INTEGRATED PERIPHERALS......................................................................... 22 3-5 POWER MANAGEMENT SETUP .................................................................... 23 3-6 PnP/PCI CONFIGURATIONS .......................................................................... 24 3-7 PC HEALTH STATUS ...................................................................................... 25 3-8 FREQUENCY/VOLTAGE CONTROL ............................................................... 26 3-9 LOAD OPTIMAL DEFAULTS............................................................................ 26 3-10 LOAD STANDARD DEFAULTS........................................................................ 27 3-11 SET SUPERVISOR/USER PASSWORD ......................................................... 27 3-12 SAVE & EXIT SETUP/EXIT WITHOUT SAVING .............................................. 27 Chapter 4 Software Installation ............................................................................................ 28 4-1 Mainboard Driver Install in Win9X,WinNT......................................................... 28 4-2 PC HEALTH MONITOR-III................................................................................ 29 4-3 SOUND Driver (Option for motherboard that embedded Audio chip) ................ 31 APPENDIX-A Magic Install ........................................................................ 46 i Chapter 1 1-1 Preface Thank you for purchasing this multifunction motherboard. It has the most flexibility you can find in today's computer market. The mainboard integrates both Intel Pentium®II / Pentium®III & CeleronTM(Slot 1) / Coppermine processor and CeleronTM (Socket 370) PPGA / FCPGA processor interface into a compact PC/ATX compatible system along with next generation of 4X AGP specification, 133MHz FSB, Ultra DMA66, and optional 3D Stereo Sound System audio chip. Moreover, this mainboard allows you conditionally approach 140MHz* of Front Side Bus Frequency to accelerate your CPU speed. 1-2 Feature of motherboard This motherboard is design for the PC user who wants highest possible quality and value in a small package. It includes following main features¡G 1-2-1 Overview · · · · · · Support both Slot 1 & Socket 370 CPU interface (You can only use one CPU interface at a time). Support Ultra DMA 66 for newer hard disk interface. Support Jump-less solution for setting Front Side Bus Frequency (CPU Host Clock) and CPU ratio under CPU Host/PCI clock of CHIPSET FEATURES SETUP. Support CPU Host Clock and DRAM Clock Asynchronous/Synchronous mode, please refer page 25 " DRAM Clock". Conditionally support 66MHz~140MHz* of Front Side Bus Frequency. This function allow user select CPU Bus Frequency by the BIOS to approach Over-Clock possibility. Provide PC Health Monitoring to track CPU temperature, system temperature, system voltage, and fan speed. When CPU current temperature is over CPU warning temperature, system will slow down automatically in order to reduce the CPU's temperature. (Option for motherboard that embedded PC Health chip) Logo-DIY: Provide CBROM utility for user to create their own loge in the BIOS. Built in high quality PCI-Based HRTF 3D Extension Positional Audio Chip (Option for motherboard that embedded Audio chip) - Supports rear side speakers, C3DX positional audio in 4 channels speaker mode. - Professional digital audio interface to support 24-bit SPDIF IN and OUT (44.1K and 48K format). - HRTF-base 3D positional audio, supporting DirectSoundTM 3D and Aural A3DTM interface. - Digital functions that capable to provide hi-fi stereo, Dolby, 3D surround effects, and playing MP3 music. You can add our Optical kit (Option for motherboard that embedded Audio chip) to connect any optical Input/Output device for super high quality sound transaction, such as playing & recording MD(Mini Disk)/CD; CD-ROM directly recording to MD; combine with DVD player to create a home theater system (This upgrade kit includes Optical Module, Optical Cable, and Software DVD Driver). · · · 1-2-2 Key Feature 1 · · · · · · · · · · · · · · * Multi-Speed Support ¡G Provide 66/75*/83*/95*/100/112*/117*/124*/133*/140*MHz Front Side Bus Frequency to support Intel Pentium®II / Pentium®III / Coppermine / Celeron processor for Slot1 interface or Intel Celeron PPGA / FCPGA on a ZIP Socket 370 interface. Chipset¡G VIA 82C694X Apollo Pro-133A Chipset. DRAM Memory Support¡G Support 3 x 168-pin DIMM sockets (3.3V) for memory from 8M Byte to 1.5GB Byte in either EDO (66MHz only) or SDRAM (66MHz/100MHz/133 MHz) type module with ECC or parity check. AGP, ISA, and PCI expansion Slots¡G Provide a 4X AGP slot, one 16-bit ISA slot, and four 32-bit PCI master slots. Super Multi-I/O: Provides two high-Speed UART compatible serial ports and one parallel port with EPP and ECP capabilities. Two floppy drives of either 5.25" or 3.5" (1.44MB or 2.88MB) are also supported without an external card. PCI Bus Master IDE Controller and ULTRA DMA 33/66 : On-board PCI Bus Master IDE controller with two connectors that supports four IDE devices in two channels, provides faster data transfer rates, and supports Enhanced IDE devices such as Tape Backup, CDROM, ZIP, LS-120 Drives. This controller also supports PIO Modes and Bus Master IDE Ultra DMA 33/66Mbyte/Second. ACPI supporting for OS Directed Power Management. Ring-In Wake up: When Ring-In the system can wake up from SMI Mode. Ring-In Power On: When Ring-In the system can power on automatic by this function. RTC Power On: Enabled RTC Power On function, you can set RTC alarm to power on the system at the time length that correspond to your setting. Power Button: Press the button will place the system power on/off. Wake on LAN : The system can power on by server in Network. Support Software Power Off function. Power Support: Efficient PWM switching power instead of traditional Linear Voltage Regulator to prevent power component from being burned-out. PC 99 ready PS/2 Mouse: This mainboard support PS/2 mouse set. USB Port Connector: This mainboard supports two USB port connectors for USB devices. Optional IrDA: This mainboard supports an optional infrared port module for wireless interface, with independent 3rd UART (32-byte FIFO). 4X AGP: Accelerated Graphics Port to support up to 1GB/sec data transfer rate and 266MHz 4X mode for AD and SBA signaling. ATX Form Factor: Dimensions 30.5cm x 19cm. Your memory module(s) must be PC133 compliant SDRAM chips and specified to run on 133MHz or 140MHz. * When you are running at 140MHz, make sure all of your PCI devices have enough tolerance to run on 37.5MHz . Otherwise, it may cause your system become very unstable. Chapter 2 2 Hardware Installation 2-1 Unpacking This mainboard package should contain the following: · · · · The mainboard USER'S MANUAL for mainboard Cable set for Ultra DMA 66 IDE x1, Floppy x1 CD for Drivers PACK The mainboard contains sensitive electronic components that can be easily damaged by electron-static, so the mainboard should be left in its original packing until it is installed. Unpacking and installation should be done on a grounded anti-static mat. The operator should be wearing an anti static wristband, grounded at the same point as the antistatic mat. Inspect the mainboard carton for obvious damage. Shipping and handling may cause damage to your board. Be sure there are no shipping and handling damages on the board before proceeding. After opening the mainboard carton, extract the system board and place it only on a grounded anti-static surface component side up. Again inspect the board for damage. Press down on the entire socket IC's to make sure that they are properly inserted. Do this only on with the board placed on a firm flat surface. Warning: Do not apply power to the board if it has been damaged. You are now ready to install your mainboard. The mounting hole pattern on the mainboard matches the ATX system board. It is assumed that the chassis is designed for a standard ATX main board mounting. Place the chassis on the anti-static mat and remove the cover. Take the plastic clips, Nylon stand-off and screws for mounting the system board, and keep them separate. 2-2 Mainboard Diagram 3 MINI- J3 DIN CPUFAN ATX POWER CONN. PL1 U20 DIMM1 DIMM2 DIMM3 USB J4 U10 J1 CO M1 ZIF SO T 370 CKE PO RT C PU C C M2 OO M2 J5 SLO T-1 J2 GAME1 MIC LINE-IN LINE-OUT U12 AG C VIA82C694X SYSFAN JP2 C MI8738 U8 U7 JP3 IR1 AGP JP9 AGP1 IDE2 U19 SPKIN 1 SPDIFIN 1 SPDIFO UT JP4 U3 IDE2 IDE1 BT1 FDD JP 1 FDD PCI1 IDE1 PCI 1 PCI2 BATT. U17 PS-O N DIMM2 SMI KE O K TBSW YL C JP15 DIMM1 + JP16 E SPE R R TBLE HDL D AKE ST D ALI M5135 PCI 2 PCI3 BIO S PCI 3 PCI4 VIA82C596B PCI 4 U4 WOL SL1 Figure 2-2 Option for motherboard that embedded with Audio Chip 2-3 Quick Reference for Jumpers, Connectors & Expansion Socket Jumpers 4 DIMM3 Jumper U19 U20 JP16 Name CPU Bus Frequency Selection CPU Ratio Selector CMOS RAM Clear Description Refer to page 6 Refer to page 6 1-2 Normal ,2-3 Clear CMOS Page p. 6 p. 6 p. 7 Connectors Connector PL1 MINI-DIN USB PRINT COM1, COM2 FDD IDE1 IDE2 HDLED SMI JP15 IR1 CPUFAN, SYSFAN PS-ON WOL Name ATX Power Connector PS/2 Keyboard/PS/2 Mouse USB Port Connector Parallel Port Connector Serial Port COMA , COMB Floppy Driver Connector Primary IDE Connector Secondary IDE Connector IDE activity LED SMI Suspend Switch Front Panel Connector Infrared Module Connector FAN Connector ATX power button/soft power button Wake On LAN Description 20-Pin Block 6-Pin Female 5-Pin Connector 26-Pin Female 9-Pin Connector 34-Pin Block 40-Pin Block 40-Pin Block 2-Pin Connector 2-Pin Connector 16-Pin Block 10-Pin Block Extra fanning system connectors 2-Pin Connector 3-pin Block Page p.9 p.9 p.9 p.9 p.10 p.10 p.10 p.10 p.11 p.11 p.11 p.12 p.12 p.12 P.12 Jumpers & Connectors (Option for motherboard that embedded Audio chip) Item number JP4 JP1 JP2 JP3 AGC SPKIN 1 SPDIFIN 1 SPDIFOUT JP9 Name On-Board Sound Enable/Disable AUX IN CD-Audio CD-Audio Line IN/Line Out/MIC /Game Connector PC Speaker In SPDIF (Sony/Philips Digital Interface) IN SPDIF (Sony/Philips Digital Interface) OUT Fo ...