I401-R/I401 USER'S MANUAL M/B For Socket 478 Pentium 4 Processor NO. G03-I401R5A Release date: October 2001 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER'S NOTICE ................................................................................ ii MANUAL REVISION INFORMATION .............................................. 1 COOLING SOLUTIONS ................................................................... 1 CHAPTER 1 INTRODUCTION OF I401-R/I401 MOTHERBOARD 1-1 1-2 1-3 1-4 FEATURE OF MOTHERBOARD ............................................... 2 SPECIFICATION .................................................................... 3 PERFORMANCE LIST............................................................. 4 LAYOUT DIAGRAM & JUMPER SETTING ................................ 5 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS ........................................ 7 2-2 CHECKING MOTHERBAORD'S JUMPER SETTING.................... 7 2-3 INSTALL CPU ........................................................................ 9 2-3-1 GLOSSARY ...........................................................................9 2-3-2 ABOUT INTEL PENTIUM 4 478-PIN CPU .............................10 2-4 INSTALL MEMORY................................................................ 11 2-5 EXPANSION CARD ................................................................. 12 2-5-1 2-5-2 2-5-3 2-5-4 PROCEDURE FOR EXPANSION CARD INSTALLATION .............12 ASSIGNING IRQ FOR EXPANSION CARD.................................12 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD .......13 AGP SLOT ............................................................................13 2-6 CONNECTORS, HEADERS....................................................... 14 2-6-1 CONNECTORS ......................................................................14 2-6-2 HEADERS .............................................................................18 2-7 STARTING UP YOUR COMPUTER ........................................... 21 CHAPTER 3 INTRODUCING BIOS 3-1 3-2 3-3 3-4 3-5 3-6 ENTERING SETUP.................................................................. 22 GETTING HELP ..................................................................... 23 THE MAIN MENU................................................................... 23 STANDARD CMOS FEATURES................................................. 24 ADVANCED BIOS FEATURES .................................................. 26 ADVANCED CHIPSET FEATURES ............................................ 28 3-6-1 DRAM TIMING SETTINGS............................................. 29 3-7 INTEGRATED PERIPHERALS.................................................. 29 3-7-1 ONCHIP IDE FUNCTION ............................................... 30 3-7-2 ONCHIP DEVICE FUNCTION ......................................... 31 3-7-3 ONCHIP SUPER IO FUNCTION ...................................... 32 3-8 POWER MANAGEMENT SETUP............................................... 33 3-8-1 PM TIMER RELOAD EVENTS........................................ 35 3-9 PNP/PCI CONFIGURATION SETUP .......................................... 35 3-9-1 IRQ RESOURCES ......................................................... 36 i 3-10 3-11 3-12 3-13 PC HEALTH STATUS ............................................................. 37 MISCELLANEOUS CONTROL................................................. 38 LOAD STANDARD/OPTIMIZED DEFAULTS ............................. 39 SET SUPERVISOR/USER PASSWORD ...................................... 39 CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION MAGIC INSTALL SUPPORTS WINDOWS 95/98/98SE/NT4.0/2000 ......... 40 4-1 INF INSTALL INTEL 845 CHIPSET SYSTEM DRIVER ............ 41 4-2 IDE INSTALL INTEL 845 ULTRA ATA DRIVER .................... 42 4-3 SOUND INSTALL ALC201 AUDIO CODEC DRIVER ................... 43 4-4 ATA100 PROMISE ATA100/RAID DRIVER MANUAL (ONLY FOR I401-R) ............................................... 44 4-4-1 INSTALL PROMISE ATA100 IDE CONTROLLER DRIVER. 44 4-4-2 INSTALL PROMISE IDE RAID CONTROLLER DRIVER .... 45 4-4-3 INSTALL PROMISE IDE RAID CONTROLLER UTILITY ... 45 4-5 PC-HEALTH WINBOND HARDWARE DOCTOR MONITORING SOFTWARE ........................................................................ 47 4-5-1 HOW TO UTILIZE PC-HEALTH....................................... 48 4-6 MAGIC BIOS INSTALL BIOS LIVE UPDATE UTILITY ........................ 49 4-7 PC-CILLIN INSTALL PC-CILLIN2000 ANTI-VIRUS PROGRAM .......... 51 4-8 HOW TO DISABLE ON-BOARD SOUND .................................... 53 4-9 HOW TO UPDATE BIOS .......................................................... 53 USER'S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE I401-R/I401 MOTHERBOARD AND WE DO ASSURE THIS MANUAL MEETS USER'S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE). PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER'S BENEFIT, WITHOUT INTENT TO INFRINGE. ii Manual Revision Information Reversion 5.0 Revision History Fifth Edition Date October 2001 Item Checklist I401-R/I401 motherboard Cable for IDE/Floppy CD for motherboard utilities Cable for USB Port 3/4 (Option) Cable for IDE RAID (only for I401-R) I401-R/I401 User's Manual ¡¼ ¡¼ Intel Pentium 4 Processor Family Cooling Solutions As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly crucial when building computer systems. Maintaining the proper thermal environment is key to reliable, long-term system operation. The overall goal in providing the proper thermal environment is keeping the processor below its specified maximum case temperature. Heatsinks induce improved processor heat dissipation through increased surface area and concentrated airflow from attached fans. In addition, interface materials allow effective transfers of heat from the processor to the heatsink. For optimum heat transfer, Intel recommends the use of thermal grease and mounting clips to attach the heatsink to the processor. When selecting a thermal solution for your system, please refer to the website below for collection of heatsinks evaluated and recommended by Intel for use with Intel processors. Note, those heatsinks are recommended for maintaining the specified Maximum T case requirement. In addition, this collection is not intended to be a comprehensive listing of all heatsinks that support Intel processors. For vendor list of heatsink and fan, please visit : http://developer.intel.com/design/Pentium4/components/index 1 Chapter 1 Introduction of I401-R/I401 Motherboard 1-1 Feature of motherboard The I401-R/I401 motherboard is design for use Intel Pentium 4 Processor in 478 Pin Package/Northwood Processor with the Intel 845 Chipset delivers a high performance and professional desktop platform solution. Which utilize the Socket 478 design and the memory size expandable to 3.0GB. This motherboard use the newest Intel 845 Chipset Supports 400MHz System Bus in data transfer rate and 133MHz SDRAM clock frequency support PC133/SDRAM . The I401-R/I401 motherboard offers ULTRA ATA 100 to provide speedier HDD throughout that boosts overall system performance. The I401-R motherboard including IDE RAID chipset and added extra 2 channel IDE interface supports either ATA100, or RAID0 (striping), RAID1 (mirroring) function. Use RAID0 function it can increasing data storage performance, use RAID1 function it can protect data which save in hard disk drive. These motherboards also has an integrated AC'97 2.1 CODEC on board which is fully compatible with Sound Blaster Pro that gives you the best sound quality and compatibility. For those wanting even greater graphic performance, an AGP 4X slot is included on the board. (For 1.5V AGP card only. No for 3.3V or Universal AGP card). With USB control as well as capability of expanding to 4 USB function ports, the I401-R/I401 meet future USB demand also this motherboard has built-in hardware monitor function. This will monitor and protect your computer. The I401 motherboards integrated Recovery Genius in BIOS protected your hard disk from virus crash hard disk data, and special design in hardware to protect BIOS from virus crash BIOS data. In I401-R/I401 we design in CPU Vcore Voltage, System 3.3V Voltage, System memory 3.3V Voltage, AGP 1.5V/3.3V Voltage those can minor adjustable in BIOS setup. This design can let users approach over clock demand and also can make system more stable. The I401-R/I401 motherboard provides special function in BIOS Setup to setting CPU Host clock step by step increasing let users to approach over clocking. I401-R/I401 provides high performance & meets future specification demand. It is really wise choice for your computer. 2 1-2 Specification Spec Design Chipset Description ATX form factor 4 layers PCB size: 30.5x24.4cm Intel 845 Memory Controller Hub (MCH) Chipset Intel 82801BA I/O Controller Hub (ICH2) Chipset PROMISE PDC20265R IDE RAID chip for I401-R only Support Intel Pentium 4 478 Pin package utilizes FlipChip Pin Grid Array (FC-PGA2) package processor Support 1.5G2.0G 478 Pin Pentium 4 processor Reserves support for future Intel Pentium 4 processors 168-pin SDR SDRAM module socket x3 Support PC133 SDRAM Expandable to 3.0GB AGP slot x1 for AGP 1.5V standard only, support AGP 2.0 & 4X mode 32-bit PCI slot x5 CNR slot x1 Two PCI IDE controllers support PCI Bus Mastering, ATA PIO/DMA and the ULTRA DMA 33/66/100 functions that deliver the data transfer rate up to 100 MB/s 2 channel IDE RAID interface supports either ATA100 or RAID0, RAID1 function AC'97 Digital Audio controller integrated AC'97 Audio CODEC on board Audio driver and utility included Award 2MB Flash ROM PS/2 keyboard and PS/2 mouse connectors Floppy disk drive connector x1 Parallel port x1 Serial port x2 USB connector x2 USB headers x2 (connecting cable option) Audio connector (Line-in, Line-out , MIC & Game Port) CPU Socket (mPGA478B Socket) Memory Socket Expansion Slot & Headers Integrate IDE IDE RAID (Only for I401-R) Audio BIOS Multi I/O 3 1-3 Performance List The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU: Intel Pentium 4 1.5GHz mPGAB package DRAM: 128M SDRAM x2 (Hyundai GM 72V66841ET75) VGA Expansion Card: Geforce 256 (1024x768 Hi-color) Driver V3.68 Hard Disk Driver: IBM DTLA-305040 (ATA-100) BIOS: Award Optimal default OS: Win 98SE Performance Test Report Pentium 4 1.5GHz 3D Mark 99 5998 3D Mark 2000 4706 3D Mark 2001 1881 3D Winbench 99 V1.2 900 3D Winbench 2000 94 Final Reality 7.57 Winstone 99 V1.3 27.3 Content Creation Winstone 2000 37.1 Content Creation Winstone 2001 44.1 Business Winstone2001 39.1 Winbench 99: CPU Mark 99 85.6 FPU Winmark 99 5130 Business Disk Winmark99 7750 Hi-end Disk Winmark99 20300 Business Graphic Winmark 342 Hi-end Graphic Winmark 973 SYS Mark 2000 : SISMark 2000 Rating (Internet Content Creation / Office Productivity) Suites 173 (185/164) Official 173 (186/163) SISOFT Sandra 2000 : Dhrystone ALU MIPS 2790 Whetstone FPU MFLOPS 1843 Int ALU/RAM MB/S 658 Float FPU/RAM MB/S 658 QUAKE3 DEMO1 FPS 131.6 4 DEMO2 FPS 130.0 1-4 Layout Diagram & Jumper Setting PRINT PS/2 MOUSE PS/2 Keyboard USB COM1 COM2 MIC LINE-IN LINE-OUT GAME/MIDI PORT K/B Power ON Jumper (JP1) PS2 KB/Mouse Port CPU FAN CPU Socket SYSFAN2 ATX P9 Power Conn. USB Port PC99 Back Panel ATX Power Conn. PC133 DIMMX3 Intel 845 Chip Front Panel Audio ATX 12V Power Conn. ATA 100 IDE Connector ATA100/RAID Mode Selector (JP14) CD Audio AGP Slot Intel 82801BA Chip Clear CMOS (JP3) PCI Slot Winbond 83697HF Chip Floppy Connector IDE RAID Connector (for I401-R) PDC20265 Chip 2M Flash ROM BIOS CNR Slot IR Connector Wake On Modem Wake On LAN Front Panel Connector SYSFAN USB Port (JP4) USB ...