P4XFCU/ P4XFCP/ P4XFCZ USER'S MANUAL M/B For Socket 478 Pentium 4 Processor NO. G03-P4XFCR2A Release date: December 2002 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER'S NOTICE............................................................................................................ii MANUAL REVISION INFORMATION ..........................................................................1 COOLING SOLUTIONS ...............................................................................................1 CHAPTER 1 INTRODUCTION OF P4XFCU/P4XFCP/P4XFCZ MOTHERBOARD 1-1 FEATURE OF MOTHERBOARD........................................................2 1-2 SPECIFICATION.............................................................................3 1-3 PERFORMANCE LIST .....................................................................4 1-4 LAYOUT DIAGRAM & JUMPER SETTING .........................................5 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS ................................................7 2-2 CHECKING MOTHERBOARD'S JUMPER SETTING ............................7 2-3 INSTALL CPU ................................................................................8 2-3-1 GLOSSARY ...........................................................................8 2-3-2 ABOUT INTEL PENTIUM 4 478-PIN CPU...................................9 2-4 INSTALL MEMORY ........................................................................9 2-5 EXPANSION CARD .........................................................................10 2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION .............10 2-5-2 ASSIGNING IRQ FOR EXPANSION CARD.................................11 2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD .......11 2-5-4 AGP SLOT ............................................................................11 2-6 CONNECTORS, HEADERS ...............................................................12 2-6-1 CONNECTORS ......................................................................12 2-6-2 HEADERS .............................................................................15 2-7 STARTING UP YOUR COMPUTER ....................................................18 CHAPTER 3 INTRODUCING BIOS 3-1 ENTERING SETUP ..........................................................................19 3-2 GETTING HELP .............................................................................19 3-3 THE MAIN MENU ...........................................................................20 3-4 STANDARD CMOS FEATURES .........................................................21 3-5 ADVANCED BIOS FEATURES ..........................................................22 3-6 ADVANCED CHIPSET FEATURES ....................................................24 3-6-1 DRAM TIMING SETTINGS .....................................................25 3-6-2 AGP FUNCTION SETTINGS ....................................................26 3-6-3 PCI TIMING SETTINGS .........................................................26 3-7 INTEGRATED PERIPHERALS ..........................................................26 3-7-1 ONCHIP IDE FUNCTION ........................................................27 3-7-2 ONCHIP DEVICE FUNCTION..................................................28 3-7-3 ONCHIP SUPER IO FUNCTION ...............................................29 3-8 POWER MANAGEMENT SETUP .......................................................30 3-8-1 PM WAKE UP EVENTS..........................................................31 3-8-1.1 IRQS ACTIVITIES ...............................................................31 3-9 PNP/PCI CONFIGURATION SETUP ...................................................32 3-9-1 IRQ RESOURCES..................................................................33 3-10 PC HEALTH STATUS .....................................................................33 3-11 MISCELLANEOUS CONTROL .........................................................34 3-12 LOAD STANDARD/OPTIMIZED DEFAULTS ......................................35 3-13 SET SUPERVISOR/USER PASSWORD ...............................................35 CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION MAGIC INSTALL SUPPORTS WINDOWS 9X/ME/NT4.0/2000/XP...................36 4-1 VIA 4 IN 1 INSTALL VIA SERVICE PACK 4 IN 1 DRIVER.....................37 4-2 SOUND INSTALL CMI AUDIO CODEC DRIVER .............................39 4-3 LAN INSTALL VIA 10/100MB LAN CONTROLLER DRIVER ..........40 4-4 PC-HEALTH WINBOND HARDWARE DOCTOR MONITORING SOFTWARE 41 4-5 MAGIC BIOS INSTALL BIOS LIVE UPDATE UTILITY .............................42 4-6 USB2.0 INSTALL USB2.0 DRIVER .............................................44 4-7 PC-CILLIN INSTALL PC-CILLIN2002 ANTI-VIRUS PROGRAM ..............45 4-8 HOW TO DISABLE ON-BOARD SOUND .............................................46 4-9 HOW TO UPDATE BIOS ..................................................................46 i USER'S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE P4XFCU/P4XFCP/P4XFCZ MOTHER-BOARD AND WE DO ASSURE THIS MANUAL MEETS USER'S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE). PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER'S BENEFIT, WITHOUT INTENT TO INFRINGE. Manual Revision Information Reversion 2.0 Revision History Second Edition Date December 2002 Item Checklist P4XFCU/P4XFCP/P4XFCZ motherboard Cable for IDE/Floppy CD for motherboard utilities Cable for USB Port 3/4(Option) P4XFCU/P4XFCP/P4XFCZ User's Manual ¡¼ Intel Pentium 4 Processor Family Cooling Solutions As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly crucial when building computer systems. Maintaining the proper thermal environment is key to reliable, long-term system operation. The overall goal in providing the proper thermal environment is keeping the processor below its specified maximum case temperature. Heatsinks induce improved processor heat dissipation through increased surface area and concentrated airflow from attached fans. In addition, interface materials allow effective transfers of heat from the processor to the heatsink. For optimum heat transfer, Intel recommends the use of thermal grease and mounting clips to attach the heatsink to the processor. When selecting a thermal solution for your system, please refer to the website below for collection of heatsinks evaluated and recommended by Intel for use with Intel processors. Note, those heatsinks are recommended for maintaining the specified Maximum T case requirement. In addition, this collection is not intended to be a comprehensive listing of all heatsinks that support Intel processors. For vendor list of heatsink and fan, please visit : http://developer.intel.com/design/Pentium4/components/index Chapter 1 1 Introduction of P4XFCU/P4XFCP/P4XFCZ Motherboard 1-1 Feature of motherboard The P4XFCU/P4XFCP/P4XFCZ motherboard is design for use Intel Pentium 4 Processor in 478 Pin Package Processor with the VIA P4X266E Chipset delivers a high performance and professional desktop platform solution. Which utilize the Socket 478 design and the memory size expandable to 2.0GB. These motherboards use the newest VIA P4X266E Chipset. Supports 533MHz System Bus in data transfer rate. The motherboard provided 100MHz/133MHz Memory clock frequency, support PC133/PC100 SDRAM and DDR266/DDR200 DDR Module. These motherboards used VIA VT8235 V-Link LPC South Bridge offer ULTRA ATA 133 to provide speedier HDD throughout that boosts overall system performance. These motherboards also has an integrated AC'97 2.1 CODEC on board which is fully compatible with Sound Blaster Pro that gives you the best sound quality and compatibility. For those wanting even greater graphic performance, an AGP 4X slot is included on the board, support AGP 2X/4X capability and Fast write Transaction. With USB control as well as capability of expanding to 6x USB2.0 function ports delivering 480Mb/s bandwidth in these motherboards and rich connectivity, these motherboards meet future USB demand also has built-in hardware monitor function to monitor and protect your computer. The P4XFCP/P4XFCZ motherboard including PCI LAN Controller chip support 10/100 Mb/sec Base transfer rate. The P4XFCZ including the 1394 PCI controller provided 100M/200M/400Mb bandwidth support two 1394 device port, which compliant with IEEE 1394A-2000 standard. A useful software tool "Magic BIOS" examines the BIOS version automatically with the correct version available on the web, links the site for users to download the latest version of BIOS and updates the BIOS. Use "Magic BIOS", users can download and update BIOS automatically and completed under the OS easily. These motherboards provide high performance & meets future specification demand. It is really wise choice for your computer. 1-2 Specification 2 Spec Design Chipset Description ATX form factor 4 layers PCB size: 30.5x21.0cm VIA P4X266E North Bridge Chipset VIA VT8235 South Bridge Chipset CPU Socket Support Intel Pentium 4 478 Pin package utilizes Flip-Chip (mPGA478B Socket) Pin Grid Array (FC-PGA2) package processor Support 1.5G2.8G 478 Pin Pentium 4 processor Reserves support for future Intel Pentium 4 processors Memory Socket 168-pin SDR SDRAM module socket x1 and 184-pin DDR Module socket x 2 Support 1 pcs PC133/PC100 SDRAM Module expandable to 1.0GB, or 2 pcs DDR266/DDR200 DDR Modules Expandable to 2.0GB Expansion Slot & AGP slot x1 support AGP 2.0 & 4X mode Headers 32-bit PCI slot x5 Two PCI IDE controllers support PCI Bus Mastering, ATA Integrate IDE PIO/DMA and the ULTRA DMA 33/66/100/133 functions that deliver the data transfer rate up to 133 MB/s 1394 Port VIA VT6307 1394 Controller chip provided two 1394 device (for P4XFCZ) ports support 100/200/400Mb bandwidth Compliant with IEEE 1394A-2000 standard LAN On Board VIA VT6103 LAN PHY chip (for P4XFCP/P4XFCZ) Supports 10/100 Mb/sec data transfer rate USB2.0 VIA VT8235 South Bridge provided 6xUSB2.0 ports support 480Mb/s bandwidth for USB2.0 devices Audio AC'97 Digital Audio controller integrated AC'97 Audio CODEC on board Audio driver and utility included BIOS Award 2MB Flash ROM Multi I/O PS/2 keyboard and PS/2 mouse connectors Floppy disk drive connector x1 Parallel port x1, Serial port x2 USB connector x2 for USB2.0 USB headers x 4 (connecting cable option) for USB2.0 Audio connector (Line-in, Line-out , MIC & Game Port) 1-3 Performance List 3 The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU: DRAM: Intel Pentium 4 1.9GHz mPGAB package 256MB DDR266 x1 (SAMSUNG K4H280838B-TCB0) 256MB SDRAM x1 (KINGMAX KSV684T4A1A-06) VGA Expansion Card: NVDIA Geforce2 MX-400 64MB (1024x768xHi-color) Hard Disk Driver: IBM DTLA-305040 (ATA-100) BIOS: Award Optimal default OS: Win 98SE DDR266 PC133 SDRAM 3D Mark 2000 5432 5360 3D Mark 2001 2509 2479 3D Winbench 2000 104 102 Final Reality 9.99 9.06 Content Creation Winstone 2000 43.2 41.5 Content Creation Winstone 2001 50.3 49.5 Content Creation Winstone 2002 20.1 18.6 Business Winstone2001 44.1 42.8 Winbench 99: CPU Mark 99 111 101 FPU Winmark 99 6610 6610 Business Disk Winmark99 7150 7090 Hi-end Disk Winmark99 18800 18500 Business Graphic Winmark 434 428 Hi-end Graphic Winmark 1260 1230 SYS Mark 2000/2001 : SISMark 2000/2001 Rating (Internet Content Creation / Office Productivity) SISMark 2000 208 (226/195) 200 (217/188) SISMark 2001 150 (175/129) 142 (160/126) SISOFT Sandra 2001 : Dhrystone ALU MIPS 3626 3630 Whetstone FPU MFLOPS 1137/2371 1135/2368 Int ALU/RAM MB/S 1181 701 Float FPU/RAM MB/S 1183 701 Integer SSE2 IT/S 7547 7554 Floating-Point SSE2 IT/S 9352 9350 QUAKE3 DEMO1 FPS 169.1 146.7 DEMO2 FPS 169.7 146.1 WCPUID System/CPU Clock 101/1918.93 101/1918. ...