S446/S446R USER'S MANUAL M/B For Socket 478 Pentium 4 Processor NO. G03-S446R2A Release date: March 2002 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER'S NOTICE ................................................................................ ii MANUAL REVISION INFORMATION .............................................. 1 COOLING SOLUTIONS ................................................................... 1 CHAPTER 1 INTRODUCTION OF S446/S446R MOTHERBOARD 1-1 1-2 1-3 1-4 FEATURE OF MOTHERBOARD ............................................... 2 SPECIFICATION .................................................................... 3 PERFORMANCE LIST............................................................. 4 LAYOUT DIAGRAM & JUMPER SETTING ................................ 5 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS ........................................ 7 2-2 CHECKING MOTHERBAORD'S JUMPER SETTING.................... 7 2-3 INSTALL CPU ........................................................................ 9 2-3-1 GLOSSARY ...........................................................................9 2-3-2 ABOUT INTEL PENTIUM 4 478-PIN CPU .............................10 2-4 INSTALL MEMORY................................................................ 11 2-5 EXPANSION CARD ................................................................. 12 2-5-1 2-5-2 2-5-3 2-5-4 PROCEDURE FOR EXPANSION CARD INSTALLATION .............12 ASSIGNING IRQ FOR EXPANSION CARD.................................12 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD .......13 AGP SLOT ............................................................................13 2-6 CONNECTORS, HEADERS....................................................... 13 2-6-1 CONNECTORS ......................................................................13 2-6-2 HEADERS .............................................................................17 2-7 STARTING UP YOUR COMPUTER ........................................... 20 CHAPTER 3 INTRODUCING BIOS 3-1 3-2 3-3 3-4 3-5 3-6 ENTERING SETUP.................................................................. 21 GETTING HELP ..................................................................... 22 THE MAIN MENU................................................................... 22 STANDARD CMOS FEATURES................................................. 23 ADVANCED BIOS FEATURES .................................................. 25 ADVANCED CHIPSET FEATURES ............................................ 27 3-6-1 DRAM TIMING SETTINGS............................................. 28 3-6-2 AGP FUNCTION SETTINGS ........................................... 29 3-7 INTEGRATED PERIPHERALS.................................................. 29 3-7-1 ONCHIP IDE FUNCTION ............................................... 30 3-7-2 ONCHIP DEVICE FUNCTION ......................................... 31 3-7-3 ONCHIP SUPER IO FUNCTION ...................................... 32 3-8 POWER MANAGEMENT SETUP............................................... 33 3-8-1 PM WAKE UP EVENTS ................................................. 34 3-9 PNP/PCI CONFIGURATION SETUP .......................................... 35 i 3-10 3-11 3-12 3-13 3-9-1 IRQ RESOURCES ......................................................... 36 PC HEALTH STATUS ............................................................. 36 MISCELLANEOUS CONTROL................................................. 37 LOAD STANDARD/OPTIMIZED DEFAULTS ............................. 38 SET SUPERVISOR/USER PASSWORD ...................................... 38 CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION MAGIC INSTALL SUPPORTS WINDOWS 95/98/98SE/NT4.0/2000 ......... 39 4-1 AGPVXD INSTALL SIS AGPVXD DRIVER ................................ 40 4-2 SOUND INSTALL ALC201 AUDIO CODEC DRIVER ................... 41 4-3 ATA100 PROMISE ATA100/RAID DRIVER MANUAL (ONLY FOR S446R) ............................................... 42 4-3-1 INSTALL PROMISE ATA100 IDE CONTROLLER DRIVER. 42 4-3-2 INSTALL PROMISE IDE RAID CONTROLLER DRIVER .... 43 4-3-3 INSTALL PROMISE IDE RAID CONTROLLER UTILITY ... 43 4-4 PC-HEALTH WINBOND HARDWARE DOCTOR MONITORING SOFTWARE ........................................................................ 45 4-5 MAGIC BIOS INSTALL BIOS LIVE UPDATE UTILITY ........................ 46 4-6 PC-CILLIN INSTALL PC-CILLIN2000 ANTI-VIRUS PROGRAM .......... 48 4-7 HOW TO DISABLE ON-BOARD SOUND .................................... 50 4-8 HOW TO UPDATE BIOS .......................................................... 50 USER'S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE S446/S446R MOTHERBOARD AND WE DO ASSURE THIS MANUAL MEETS USER'S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE). PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER'S BENEFIT, WITHOUT INTENT TO INFRINGE. ii Manual Revision Information Reversion 2.0 Revision History Second Edition Date March 2002 Item Checklist S446/S446R motherboard Cable for IDE/Floppy CD for motherboard utilities Cable for USB Port 3/4 (Option) Cable for IDE RAID (only for S446R) S446/S446R User's Manual ¡¼ ¡¼ Intel Pentium 4 Processor Family Cooling Solutions As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly crucial when building computer systems. Maintaining the proper thermal environment is key to reliable, long-term system operation. The overall goal in providing the proper thermal environment is keeping the processor below its specified maximum case temperature. Heatsinks induce improved processor heat dissipation through increased surface area and concentrated airflow from attached fans. In addition, interface materials allow effective transfers of heat from the processor to the heatsink. For optimum heat transfer, Intel recommends the use of thermal grease and mounting clips to attach the heatsink to the processor. When selecting a thermal solution for your system, please refer to the website below for collection of heatsinks evaluated and recommended by Intel for use with Intel processors. Note, those heatsinks are recommended for maintaining the specified Maximum T case requirement. In addition, this collection is not intended to be a comprehensive listing of all heatsinks that support Intel processors. For vendor list of heatsink and fan, please visit : http://developer.intel.com/design/Pentium4/components/index 1 Chapter 1 Introduction of S446/S446R Motherboard 1-1 Feature of motherboard The S446/S446R motherboard is design for use Intel Pentium 4 Processor in 478 Pin Package/Northwood Processor with the SiS 645 Chipset delivers a high performance and professional desktop platform solution. Which utilize the Socket 478 design and the memory size expandable to 3.0GB. This motherboard use the newest SiS 645 Chipset Supports 400MHz System Bus in data transfer rate and 133MHz/166MHz SDRAM clock frequency support DDR200/ DDR266/DDR333 DDR SDRAM Module . The S446/S446R motherboard offers ULTRA ATA 100 to provide speedier HDD throughout that boosts overall system performance. The S446R motherboard including IDE RAID chipset and added extra 2 channel IDE interface supports either ATA100, or RAID0 (striping), RAID1 (mirroring) function. Use RAID0 function it can increasing data storage performance, use RAID1 function it can protect data which save in hard disk drive. These motherboards also has an integrated AC'97 2.1 CODEC on board which is fully compatible with Sound Blaster Pro that gives you the best sound quality and compatibility. For those wanting even greater graphic performance, an AGP 4X slot is included on the board. With USB control as well as capability of expanding to 4 USB function ports, the S446/S446R meet future USB demand also this motherboard has built-in hardware monitor function to monitor and protect your computer. The S446 motherboards also integrated Recovery Genius in BIOS to protect your hard disk from virus infect hard disk data, along with special hardware design to protect BIOS from virus crash BIOS data. In S446/S446R, we have adding CPU Vcore Voltage minor adjustment and CPU Host clock step-by-step increment designs in BIOS Setup Utility in order to ensure system's stability while user approach over clock demand. S446/S446R provides high performance & meets future specification demand. It is really wise choice for your computer. 2 1-2 Specification Spec Design Chipset Description ATX form factor 4 layers PCB size: 30.5x24.4cm SiS 645 North Bridge Chipset SiS 961 HyperZip Media I/O Chipset PROMISE PDC20265R IDE RAID chip for S446R only Support Intel Pentium 4 478 Pin package utilizes FlipChip Pin Grid Array (FC-PGA2) package processor Support 1.5G2.0G 478 Pin Pentium 4 processor Reserves support for future Intel Pentium 4 processors 184-pin DDR SDRAM module socket x3 Support 2 pcs DDR333 or 3 pcs DDR200/DDR266 DDR SDRAM Modules Expandable to 3.0GB AGP slot x1 support AGP 2.0 & 4X mode 32-bit PCI slot x5 CNR slot x1 Two PCI IDE controllers support PCI Bus Mastering, ATA PIO/DMA and the ULTRA DMA 33/66/100 functions that deliver the data transfer rate up to 100 MB/s 2 channel IDE RAID interface supports either ATA100 or RAID0, RAID1 function AC'97 Digital Audio controller integrated AC'97 Audio CODEC on board Audio driver and utility included Award 2MB Flash ROM PS/2 keyboard and PS/2 mouse connectors Floppy disk drive connector x1 Parallel port x1 Serial port x2 USB connector x2 USB headers x2 (connecting cable option) Audio connector (Line-in, Line-out , MIC & Game Port) CPU Socket (mPGA478B Socket) Memory Socket Expansion Slot & Headers Integrate IDE IDE RAID (Only for S446R) Audio BIOS Multi I/O 3 1-3 Performance List The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU: DRAM: Intel Pentium 4 1.9GHz mPGAB package 128M DDR266 x2 (SAMSUNG K4H280838B-TCB0) 256M DDR333 x1 (KINGMAX KDL684T4A2A-6) VGA Expansion Card: NVDIA Geforce2 MX-400 64MB (1024x768xHi-color) Hard Disk Driver: IBM DTLA-305040 (ATA-100) BIOS: Award Optimal default OS: Win 98SE Performance Test Report 3D Mark 2000 3D Mark 2001 3D Winbench 2000 Final Reality Content Creation Winstone 2000 Content Creation Winstone 2001 Business Winstone2001 Winbench 99: CPU Mark 99 109 114 FPU Winmark 99 6600 6610 Business Disk Winmark99 7650 8980 Hi-end Disk Winmark99 19000 20400 Business Graphic Winmark 432 440 Hi-end Graphic Winmark 1250 1270 SYS Mark 2001 : SISMark 2000/2001 Rating (Internet Content Creation / Office Productivity) SISMark 2000 205 (223/192) 214 (233/201) SISMark 2001 149 (167/133) 154 (174/136) SISOFT Sandra 2001 : Dhrystone ALU MIPS 3623 3616 Whetstone FPU MFLOPS 1136/2365 1131/2369 Int ALU/RAM MB/S 881 1098 Float FPU/RAM MB/S 892 1117 Integer SSE2 IT/S 7531 7538 Floating-Point SSE2 IT/S 9342 9333 QUAKE3 DEMO1 FPS 164.6 176.6 DDR266 5369 2492 103 9.76 42.5 52.7 45.1 DDR333 5477 2519 104 10.60 43.6 53.6 46.7 4 DEMO2 FPS WCPUID System/CPU Clock 164.9 178.7 100.67/1912.81 100.67/1912.81 1-4 Layout Diagram & Jumper Setting PRINT PS/2 MOUSE PS/2 Keyboard USB COM1 COM2 MIC LINE-IN LINE-OUT GAME/MIDI PORT K/B Power ON Jumper (JP1) PS2 KB/Mouse Port CPU Socket CPU FAN USB Port DDR DIMMX3 PC99 Back Panel ATX Power Conn. ATA 100 IDE Conn. SiS 645 Chip ATX 12V Power Conn. ATX P9 Power Conn. Front Panel Audio CD Audio ITE 8705 Chip 2MBit Flash ROM BIOS Floppy Connector SYSFAN AGP Slot SiS 961 Chip Clear CMOS (JP2) IDE RAID Connector (for S446R) PCI Slot CNR Slot PDC20265 Chip Front Panel Connector IR Connector USB Port Wake On LAN ATA100/RAID Mode Selector (JP4) 5 Jumpers Jumper JP2 JP1 JP4 Name CMOS RAM Clear Keyboard Power On Enable/Disabled ATA 100/RAID Mode Selector Descri ...