S755TWIN USER'S MANUAL M/B For Socket 754 AMD Athlon64 Processor NO. G03-S755T8 Rev:1.0 Release date: April 2003 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER'S NOTICE ................................................................................................................ ii MANUAL REVISION INFORMATION ................................................................................ ii COOLING SOLUTIONS...................................................................................................... ii CHAPTER 1 INTRODUCTION OF S755TWIN MOTHERBOARD 1-1 FEATURE OF MOTHERBOARD ......................................................................... 1 1-2 SPECIFICATION ................................................................................................... 2 1-3 PERFORMANCE LIST ......................................................................................... 3 1-4 LAYOUT DIAGRAM & JUMPER SETTING......................................................... 4 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS................................................................. 6 2-2 CHECKING MOTHERBOARD'S JUMPER SETTING ........................................ 6 2-3 INSTALL CPU ....................................................................................................... 7 2-3-1 GLOSSARY ............................................................................................... 7 2-3-2 ABOUT INTEL AMD K8 754-PIN CPU..................................................... 8 2-4 INSTALL MEMORY .............................................................................................. 8 2-5 EXPANSION CARD .............................................................................................. 9 2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION...................... 9 2-5-2 ASSIGNING IRQ FOR EXPANSION CARD............................................. 9 2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD .............. 10 2-5-4 AGP SLOT ................................................................................................. 10 2-6 CONNECTORS, HEADERS ................................................................................. 11 2-6-1 CONNECTORS ......................................................................................... 11 2-6-2 HEADERS.................................................................................................. 14 2-7 STARTING UP YOUR COMPUTER..................................................................... 18 CHAPTER 3 INTRODUCING BIOS 3-1 ENTERING SETUP............................................................................................... 19 3-2 GETTING HELP .................................................................................................... 19 3-3 THE MAIN MENU.................................................................................................. 20 3-4 STANDARD CMOS FEATURES.......................................................................... 21 3-5 ADVANCED BIOS FEATURES............................................................................ 22 3-6 ADVANCED CHIPSET FEATURES..................................................................... 24 3-6-1 DRAM TIMING SETTINGS ....................................................................... 25 3-7 INTEGRATED PERIPHERALS ............................................................................ 26 3-7-1 ONBOARD IDE FUNCTION ..................................................................... 26 3-7-2 ONBOARD DEVICE FUNCTION.............................................................. 27 3-7-3 ONBOARD SUPER IO FUNCTION.......................................................... 28 3-8 POWER MANAGEMENT SETUP ........................................................................ 29 3-8-1 PM TIMER RELOAD EVENTS ................................................................ 30 3-9 PNP/PCI CONFIGURATION SETUP ................................................................... 30 3-9-1 IRQ RESOURCES.................................................................................... 31 3-10 PC HEALTH STATUS ......................................................................................... 32 3-11 MISCELLANEOUS CONTROL ........................................................................... 32 3-12 LOAD STANDARD/OPTIMIZED DEFAULTS..................................................... 33 3-13 SET SUPERVISOR/USER PASSWORD............................................................ 34 CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION MAGIC INSTALL SUPPORTS WINDOWS 98SE/ME/NT4.0/2000/XP ........................ 35 INSTALL SIS AGPVXD DRIVER .................................................... 36 4-1 AGPVXD INSTALL SIS MINI IDE DRIVER..................................................... 37 4-2 IDE INSTALL ALC AUDIO CODEC DRIVER........................................ 37 4-3 SOUND INSTALL LAN CONTROLLER DRIVER ........................................ 38 4-4 LAN INSTALLS SMART GUARDIAN SOFTWARE FOR HARDWARE 4-5 PC-HEALTH MONITORING DEVICE .............................................................. 39 INSTALL PC-CILLIN2002 ANTI-VIRUS PROGRAM .................... 40 4-6 PC-CILLIN INSTALL SIS USB2.0 DEVICE DRIVER ........................................ 41 4-7 USB2.0 INSTALL SIS 180 RAID DRIVER AND UTILITY ........................... 42 4-8 RAID 4-9 HOW TO DISABLE ON-BOARD SOUND ................................................................. 43 4-10 HOW TO UPDATE BIOS.............................................................................................. 43 i USER'S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE S755TWIN MOTHER-BOARD AND WE DO ASSURE THIS MANUAL MEETS USER'S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE). PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER'S BENEFIT, WITHOUT INTENT TO INFRINGE. Manual Revision Information Reversion 1.0 Revision History First Release Date April 2003 Item Checklist S755TWIN Motherboard Cable for IDE/Floppy CD for motherboard utilities Cable for USB Port 3/4 (Option) Cable for Serial ATA IDE Port SPDIF-IN/SPDIF-OUT Adaptor S755TWIN User's Manual AMD K8 Processor Family Cooling Solutions As processor technology pushes to faster speeds and higher performance with increasing operation clock, thermal management becomes increasingly crucial while building computer systems. Maintaining the proper computing environment without thermal increasing is the key to reliable, stable, and 24 hours system operation. The overall goal is keeping the processor below its specified maximum case temperature. Heatsinks induce improved processor heat dissipation through increasing surface area and concentrated airflow from attached active cooling fans. In addition, interface materials allow effective transfers of heat from the processor to the heatsink. For optimum heat transfer, AMD recommends the use of thermal grease and mounting clips to attach the heatsink to the processor. Please refer to the website below for collection of heatsinks evaluated and recommended for Socket-A processors by AMD. In addition, this collection is not intended to be a comprehensive listing of all heatsinks that support Socket-754 processors. For vendor list of heatsinks and Active cooling fans, please visit http://www.amd.com/us-en/Processors/DevelopWithAMD/0,,30_2252_869_9460^9515,00.html ii Introduction MagicTwin is a 2-User-System solution built on this special designed motherboard with a dual headed AGP graphic card, two PS/2 keyboard and mouse Y-cables and one piece of software (Driver and Tools). It allows you to add one additional station simultaneously running Windows XP Home or XP-Professional (Service Pack 1). System Requirement Jetway MagicTwin Motherboard: 2 x PS/2 Y-cable Install CD (Driver and MagicTwin) Serial Number and Activation Key Purchased Separately from Dealer: >=1.2 GHz Processor Min 256MB DRAM NVIDIA Dual Head AGP Graphic Card Windows XP Home, Prof. w/ SP1 2 x PS/2 Keyboards 2 x PS/2 Mice 2 x Monitors Necessary Components to Configure 2-User-System one special designed Motherboard with connectivity hardware onboard one dual head AGP graphic card (purchased separately from your dealer) two Y-cables for two PS/2 Keyboards and two PS/2 Mice MAGIC INSTALL CD (incl. all DRIVERS you need and some TOOLS to enable the 2-User function of the motherboard). In addition this CD includes an auto detect software, which detects, installs and nd nd assigns the related 2 video display and the 2 PS/2 keyboard and PS/2 mouse. one serial number and activation key (printed on the sticker label on top of the CD package folding seal) two monitors two speaker systems (optional) Recommendations CPU: >1GHz minimum 256 MB RAM for two Stations, running simultaneously two Standard PS/2 Keyboards, -Mice and two Monitors (Sound: optional) Hard disk and CD-ROM drive Installation of MagicTwin We recommend to install Windows XP and all related drivers from the scratch Switch off your PC and open the computer case Remove the AGP slot bracket and insert a dual headed AGP Video Card purchased separately from your dealer into the AGPslot. If the delivered motherboard comes with dual VGA port onboard, please skip this step. Dual Port AGP VGA Card As well attach the delivered Y-cables to the "green" port (former PS/2 Mouse port) and into the "violet" port (former PS/2 Keyboard port) at the rear side of the motherboard. st nd Connect the 1 and 2 mouse to the Y-cable, which is also linked to the "green" PS/2 connector and st nd the 1 and 2 keyboard to the other Y-cable, which is also connected to the "violet" port. The additional nd monitor MUST be attached otherwise windows will not detect and enable the 2 monitor. Make sure the additional keyboards and mice work; they should affect the host console. Start your PC. Windows will automatically detect the new AGP Video device as a standard VGA-card. Please install first all drivers before installing "MagicTwin" of the MAGIC INSTALL CD. Insert the CD, wait for the automatic start and run the Installation of all other drivers beside the MagicTwin from the Magic Install CD. If the CD does not run automatically, please click to Start-> Run-> CD-Drive-> SETUP.EXE. m1 After all other drivers have been installed, lastly install the MagicTwin as follow: Click "MagicTwin" when the MAGIC INSTALL MENU appears. The Installation-routine will start... Welcome- Mask, click "Next" Option: Change destination path or click "Next" Password and Network Console, click "Next" Type in the Serial and Address, click "Next" Installation in process, please wait... Afterwards "Reboot your PC". Windows is restarting and loading the new installed drivers. The MagicTwin will be activated and assign nd nd automatically the 2 Station to the 2 monitor, -PS/2-keyboard and PS/2 mouse. Please login in to Windows and add one or more additional users under the control panel. Dual Head AGP-card The NVIDIA MX 440-8X, MX-4000, FX 5200 and FX5600 dual-head graphic cards are supported under MagicTwin. One display can be used by the host and the second by the MagicTwin station. Contact your dealer for purchasing of the validated NVIDIA dual head AGP VGA card. Among them are: 1. Jetway NV18-A2-64B 2. Jetway NV34-AD-128B 3. Jetway N31X-AD-128B 4. Asustek V9520 5. Leadtek A340 6. Leadtek A180 7. MSI FX5600-TD128 8. MSI FX5200-TD128 m2 Einführung Dieses Barebone-System ist eine Multi-User-Plattform, welche die Verbindung zweier Benutzer zum System ® ermöglicht. Mit einer Anschlusshardware onboard und einer innovativen Software, erlaubt das MagicTwin Series Barebone System zwei Benutzern verbunden zu sein und simultan eine Windows ­ Session zu betreiben. Jeder der zwei Benutzer hat dabei das Gefühl, seinen eigenen Windows-XP Rechner zu haben. Jeder Benutzer benötigt seine eigene Tastatur, seine eigene Maus, Soundkarte und seinen eigenen Monitor. Die übrige PC Hardware wird geteilt, sogar die IP. Alles was Sie ...