AV-14RM4SP ENGLISH FRANÇAIS DEUTSCH ITALIANO CASTELLANO NEDERLANDS PORTUGUÊS COLOUR TELEVISION TELEVISEUR COULEUR FARBFERNSEHGERÄT TELEVISORE A COLORI TELEVISOR A COLOR KLEURENTELEVISIE TELEVISOR A CORES INSTRUCTIONS MANUEL D'INSTRUCTIONS BEDIENUNGSANLEITUNG ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING INSTRUÇÕES ©2004 Victor Company of Japan, Limited 50050685 0504-JVC Contents Remote Control Buttons .......................................... 2 Control Panel Buttons .............................................. 3 Antenna Connections ............................................... 3 Preparation ................................................................ 4 Features .......................................................................... 4 Safety Precautions The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting for your convenience. Safety Precautions ................................................... 1 1. Power Source 2. Power Cord The power supply cord should be placed so that they are not likely to be walked on or pinched by items placed upon them or against them. Pay particular attention to cord where they enter the plug, power outlet, and the point where they exit from the receiver. Before Switching on your TV .................................. 4 Power connection ............................................................. Aerial Connections ........................................................... How to connect the external equipments .......................... Inserting batteries in the remote control handset .............. 4 4 4 4 3. Moisture and Water Do not use this equipment in a humid and damp place (avoid machine). Do not expose this equipment to rain or water and do not place objects filled with liquids on it as this may be dangerous. Switching the TV ON/OFF ........................................ 4 the bathroom, the sink in the kitchen, and near the washing To switch the TV on .......................................................... 4 To switch the TV off .......................................................... 4 Initial Settings ........................................................... 4 Operating with the onset buttons ...................................... 5 Operating with Remote Control ......................................... 5 Picture Menu ................................................................... Feature Menu ................................................................... Install. Menu .................................................................... Program. (Programming) Menu ........................................ Sound Mute ..................................................................... Information on Screen ...................................................... To Display the Time .......................................................... Standard .......................................................................... VCR Control Buttons ........................................................ To operate Teletext ........................................................... To select a page of Teletext .............................................. To Select Index Page ....................................................... Searching for a teletext page while watching TV ............... To Select Double Height Text ........................................... To Reveal concealed Information .................................... To Stop Automatic Page Change ...................................... To Select a Subcode Page ............................................... To exit Teletext ................................................................. 5 6 7 7 8 8 8 8 8 9 9 9 9 9 9 9 9 9 4. Cleaning Before cleaning, unplug the receiver from the main supply and dry cloth. Menu System ............................................................. 5 outlet. Do not use liquid or aerosol cleaners. Use with soft 5. Ventilation The slots and openings on the receiver are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway. Other Features .......................................................... 8 6. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet. Teletext ...................................................................... 9 7. Replacement Part When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock, or other hazards. 8. Servicing Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock. Connect the External Equipments ........................ 10 Via the Euroconnector ..................................................... 11 AV-1 S Mode ................................................................... 11 Via the RCA jacks ........................................................... 11 Via the ANT (aerial) socket .............................................. 11 TV and Video Recoder (VCR) .......................................... 11 NTSC Playback .............................................................. 11 Connecting Headphones ................................................. 11 9. Flame sources Do not place naked flame sources on the apparatus. 10. Stand-By Do not leave your TV stand-by or operating condition when you leave your house. Warning! Any intervention contrary to regulations, in particular, any modification of high voltage or a replacement of the picture tube may lead to an increased concentration of x-rays. Any television modified in this way no longer complies with license and must not be operated. Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children. Tips ........................................................................... 11 Specifications .......................................................... 12 ENGLISH - 1 - Remote Control Buttons = Stand By / Power 0 - 9 = Direct Program Standard Button (PICTURE default settings) Colour Buttons MENU = Menu Button ( ( ) = Cursor Up / Programme Up ) = Cursor Right / Volume + Teletext Control Buttons VCR Control Buttons ( ( ) = Cursor Down / Programme Down ) = Cursor Left / Volume - AV = AV Button = Information Button = Mute CAUTION RISK OF ELECTRIC SHOCK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock of persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. ENGLISH - 2 - Control Panel Buttons Crhqur &21752/ 3$1(/ %877216 )5217 $9 Qr 6qvÃDà ÃQthà ÃWyrà Urvhy WvqrÃDà Urvhy Antenna Connections ENGLISH - 3 - Preparation Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. NOTE: Remove batteries from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Switching the TV ON/OFF You can operate your TV either using the remote control handset or directly using the TV onset buttons. Features It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system. It has an Euroconnector socket for external devices (such as video recorder, video games, audio set, etc.) Front AV Input available. Teletext. It is possible to connect headphone. Direct channel access. APS (Automatic Programming System). All programmes can be named. Forward or backward automatic tuning. Sleep timer. Automatic sound mute when no transmission. 5 minutes after the broadcasting (closedown), the TV switches itself automatically to stand-by mode. To switch the TV on Your TV will switch on in two steps: 1- Press the power button located on the front of the TV. Then the TV switches itself to standby mode and the RED LED located below the TV turns on. 2- To switch on the TV from stand-by mode either: Press a digit button on the remote control so that a programme number is selected, or, Press Standby / Power Button or Programme Up and Down buttons on the front of the TV or on the remote control respectively, so the TV will switch on and the RED Led will turn GREEN. To switch the TV off Press the stand-by button on the remote control, so the TV will switch to stand-by mode and the GREEN LED will become RED, or, Press the power button located on the front of the TV. Before Switching on your TV Power connection Important: The TV set is designed to operate on 220-240 V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Initial Settings The message "PLEASE CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM" will be displayed when you turn on your TV for the first time. 1- Select LANGUAGE with the or button, then press the or button to select a menu language. 2- Select COUNTRY with the or button, then press the or button to select the country you are now located. 3- Select START with the or button, then press the button to start APS. APS (Automatic Programming System) automatically programmes the received channels in your TVs programme numbers. During APS, "A. P. S. IS RUNNING" will be displayed. After APS is finalized, the PROGRAM. menu appears. To cancel APS, press the button. You can delete a channel, insert a channel into a programme number, or re-start APS with the PROGRAM. menu. For details, see Program. (Programming) Menu on page 7. 4- Press the "STANDARD" button to complete the initial settings. After the initial settings are complete, you can change a programme number or to name a programme number or to prog r a m m e n e w c h a n n e l m a n u a l l y. F o r d e ta i l s , s e e Install. Menu on page 7. If the message "PLEASE CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM" does not appear, follow the description Program. (Programming) Menu on page 7 to select a menu language and the country where you are now located, and to use A.P.S.. Aerial Connections Connect the aerial plug to the aerial input socket located at the back of the TV. How to connect the external equipments See Connect the External Equipments on page 10. See the instruction manuals provided with the external devices too. Inserting batteries in the remote control handset Remove the battery cover located on the back of the handset by gently pulling upwards from the indicated part. Insert two AA (R6) or equivalent type batteries inside. Replace the battery cover. ENGLISH - 4 - Menu System Your TV has been designed with a menu system. Display MENU (main menu) and enter one of four menus (PICTURE, FEATURE, INSTALL. and PROGRAM.). 1- Press MENU button to display MENU (main menu). The menu titles will be displayed in the main menu. or button to select a menu title, then 2- Press press or button to enter the menu. To exit a menu, press STANDARD button. To go to the previous menu, press MENU button. Picture Menu Operating with the onset buttons Volume setting and programme selection can be made using the buttons on the front panel. Volume Setting: button to decrease volume or + button to Press increase volume, so a volume level scale will be displayed on the screen. Programme Selecting: Press P/CH+ button to select next programme or -P/CH button to select the previous programme. To change picture settings: Press MENU button, now you are in main menu. In the main menu, select PICTURE using or button, then enter the picture menu pressing or button. or, Enter the Picture Menu directly, pressing the GREEN button. Setting Brightness: As you enter the picture menu, BRIGHTNESS will be the first selected option. Press button to increase BRIGHTNESS. Press button to decrease BRIGHTNESS. Operating with Remote Control The remote control handset of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV. Functions which you can use out of menu system are described below. Volume Setting Press Press button to ...