ENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTELLANO ITALIANO AV-21NT4SU AV-21NT4BU AV-28NT4SU AV-28NT4BU INSTRUCTIONS FARBFERNSEHGERÄT TELEVISEUR COULEUR KLEURENTELEVISIE TELEVISOR A COLOR TELEVISORE A COLORI BEDIENUNGSANLEITUNG MANUEL D'INSTRUCTIONS GEBRUIKSAANWIJZING MANUAL DE INSTRUCCIONES INSTRUZIONI Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. 1. WATER AND MOISTURE The apparatus shall not be exposed to dripping or splashing water and no object filled with liquids, such as vases , should be placed on the apparatus. 2. HEAT Never place the set near heat sources. Never put a naked flame, such as a candle, on the top of TV set. 3. VENTILATION Do not cover the ventilation openings in the cabinet and never place the set in a confined space such as in a bookcase or built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit. 4. 5. 6. 7. OBJECT ENTRY Do not insert foreign objects, such as needles and coins, in the ventilation openings. LIGHTNING STRIKE You should disconnect the set from the mains and the aerial system during thunderstorms. CLEANING Unplug the set from the mains while cleaning. AFTER MOVING THE SET If the set is moved or turned, the MAIN POWER button must be switched off for at least 15 minutes in order to take out colour patches on the screen. 8. CAUTION There is danger of choking or suffocation if the cap which is removed from the TV is accidentally swallowed by children. Store the cap out of the reach of children. IDENTITY OF LOCAL & REMOTE CONTROL LOCAL CONTROL Front AV-21NT4 MODEL AV-28NT4 MODEL ENGLISH EXT-3 B1 B2 B3 B4 B5 B6 B7 B8 B9 B1 B2 B3 B4 B5 B6 B7 B8 B9 Rear AERIAL socket SCART 1 socket EXT-1 SCART 2 socket EXT-2 REMOTE CONTROL TV mode A1 A2 /I A3 0 9 zoom A4 A5 A6 A7 A8 A9 PICTURE/OK A10 MENU A11 A12 A13 A14 A15 AV A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 V D A26 I / II SOUND MUTE A1 POWER NUMBER 0..9 ZOOM / SKIP SOUND EFFECT / MOVE SLEEP / DELETE Not used A5 TV > TELETEXT 1 PICTURE / OK A4 MENU A8 PROGRAM UP (CURSOR UP) A11 PROGRAM DOWN (CURSOR DOWN) A15 VOLUME DOWN (CURSOR LEFT) VOLUME UP (CURSOR RIGHT) A13 TV / AV Not used A17 Not used A16 Not used A20 Not used A21 Not used A24 Not used A25 Not used Not used INFORMATION VCR / TELETEXT / DVD switch MODE Stereo/Mono Dual language I / II RM-C1514 A2 TELETEXT mode A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 /I 0 9 A3 A6 A7 PICTURE/OK MENU MENU A9 A10 A14 A12 A18 A19 A23 A22 A26 ? X i RM-C1514 2 SOUND MUTE POWER NUMBER 0..9 RED GREEN YELLOW CYAN TELETEXT > TV Not used VOL/BRIGHTNESS MENU SELECTION PAGE UP PAGE DOWN VOL / BRIGHTNESS DOWN VOL / BRIGHTNESS UP Not used PAGE HOLD Not used REVEAL DOUBLE SIZE Not used Not used CANCEL INDEX SUBPAGE VCR / TELETEXT / DVD switch Not used SETTING UP Batteries ENGLISH Open remote control battery compartment (at the rear) and insert two 1.5V type AA / R6 batteries. Warning: be careful to respect battery polarities. Insert the main plug into a 220 - 240V 50Hz AC power socket. Connect aerial to aerial jack. It is usually connected by means of a 75 ohm cable. START UP SWITCHING ON Switch the TV set on with the MAIN POWER button (B1). LANGUAGE MENU The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further. The descriptions used in the menu are those of the country code (e.g. GB = English, NL = Holland etc). P LANGUAGE PICTURE/OK P BG CZ D DK E F FIN GB GR H I N NL P PL RO RUS S Selection is made by use of the remote control CURSOR UP (A11) / CURSOR DOWN (A12) buttons and CURSOR LEFT (A13) / RIGHT (A14) buttons. Once you are satisfied with your selection, push the OK button (A9) to confirm your choice, and then the menu will disappear. The language entered at this stage can still be modified at any later time, by entering the LANGUAGE selection (accessed from the FEATURES menu page 9). Note : The languages shown are subject to modification without prior notice. 3 3 INSTALLATION AUTO TUNING SYSTEM MENU SELECTION Press remote control MENU button (A10) to display the MAIN MENU. Move the cursor to INSTALL by using the remote control CURSOR UP (A11),DOWN(A12) buttons. Then press the remote control OK button (A9). Note: All menus are removed within 60 seconds if you don't press any button. MENU PICTURE SOUND ENGLISH INSTALL FEATURES COUNTRY SELECTION Position the cursor at ATSS Menu and select country code where TV is used by pressing the remote control CURSOR LEFT (A13), RIGHT(A14) buttons. The following countries can be selected. INSTALL ATSS EDIT SYSTEM CHANNEL FREQUENCY NAME PROGRAM STORE TO GB GB C 46 671.25 BBC 1 01 01 A, B, CH, CZ, D, DK, E F, FIN, GB, GR, H, I, IRL N, NL, P, PL, S, SK Others ATSS - Auto Tuning and Sorting System After selecting country code, press and hold OK button for 3 - 4 seconds until "Please wait!" is displayed, then auto program tuning starts searching all the available TV stations in your area. When auto tuning and sorting is completed, the EDIT menu with the recorded programs appears on the screen. To exit the EDIT menu, press MENU button 3 times, then the menu display will disappear from TV screen. Now you can select program using the remote control UP (A11) or DOWN (A12) buttons. EDIT MENU The EDIT menu shows you the programme position assignment. When using the AUTO TUNING method, the broadcasts may not be found and stored in the order you desired. For example, BBC1 may not be allocated to programme number 01, and BBC2 may not be allocated to programme number 02, etc. The EDIT menu enables you to change the programme position assignment according to your personal preference. To reach the EDIT menu you have to first select INSTALL menu from the MAIN menu. EDIT PR 06 05 04 03 02 01 00 NAME CH 4 S4C CH 4 IT V BBC 2 BBC 1 ------CH C46 C39 C05 C31 C34 C37 C21 SKIP CHANGING ORDER OF CHANNELS Position the cursor to the programme number you want to move and press the remote control GREEN (A5) MOVE button. The programme turns to red colour. Then use the UP (A11) or DOWN (A12) buttons to move the programme number you wish to store it to and press MOVE button again to confirm the operation. Press MENU to return to INSTALL menu. PICTURE/OK DELETE PROGRAMME POSITION DATA Position the cursor to the programme number you wish to delete using the remote control UP (A11) or DOWN (A12) buttons. Press the YELLOW/DELETE (A6) button. The delete programme is instantly moved to programme N° 99. The programme which was located at N° 99 will automatically move to N° 98. PICTURE/OK P 4 SKIPPING THE CHANNELS Position the cursor to the programme number you wish to skip, then press the RED (SKIP) (A4) button. A skipped programme is marked with the sign " " at its right end. The channel corresponding to a skipped programme will not appear on screen when changing channels using PROGRAM UP (A11) / DOWN (A12) buttons. PICTURE/OK MANUAL CHANNEL TUNING Tuning by ATSS (Auto Tuning Sorting System) is recommendable, as it is the easiest tuning method. But Manual Tuning is also possible using the following procedure. INSTALL ATSS EDIT SYSTEM CHANNEL FREQUENCY NAME PROGRAM STORE TO ENGLISH BROADCASTING SYSTEM SELECTION Select INSTALL menu and using the remote control CURSOR UP (A11) / DOWN (A12) buttons, move the cursor to SYSTEM menu and select the appropriate system by the LEFT (A13) or RIGHT (A14) button. "FRANCE" "GB" "EURO" "E/EURO" France SECAM L/L' Great Britain / Ireland PAL-I/I' Westen Europe PAL-SECAM B/G Eastern Europe PAL-SECAM D/K GB GB C 46 671.25 BBC 1 01 01 ACTIVATING MANUAL TUNING Move the cursor to FREQUENCY (channel frequency) menu and press and hold for more than 2 seconds the remote control CURSOR LEFT (A13) or RIGHT (A14) buttons for searching. When one channel is tuned, the corresponding station name is indicated automatically in NAME menu. To tune the next channel, press the remote control CURSOR LEFT (A13) or RIGHT (A14) buttons again. CHANNEL AND FREQUENCY MENU If you know the channel or frenquency number you want to search, enter the data by 0...9 buttons. TV will tune that channel quickly. PERFORM FINE TUNING If you are unable to obtain good picture or reasonable sound volume due to poor reception it is possible to perform fine tuning. - Select the "FREQUENCY" menu. - Press for less than 2 seconds, the remote control CURSOR LEFT (A13) and CURSOR RIGHT (A14) buttons to activate FINE TUNING _ / + in steps of 0.05 MHz(50kHz). STORING CHANNEL NAME When one channel is tuned, the corresponding station NAME will be detected automatically. But in some cases, NAME will not be detected due to the broadcasting situation. You may put in the channel NAME yourself. Position the cursor to NAME menu and press the remote control CURSOR RIGHT(A14) button. A cursor appears on the left end of NAME line ("- - - - - - -"). Then press CURSOR UP (A11) or DOWN (A12) buttons untill you get the right letter or symbol. Move the cursor to the next position by using CURSOR LEFT (A13) or RIGHT (A14) buttons and repeat the operation. Press OK (A9) button to store the NAME. PROGRAM MENU The number on the right side of the PROGRAM menu indicates the program number of the currently displayed channel. STORE TO MENU Select STORE TO menu and select the program number by 0....9 buttons or CURSOR LEFT (A13) or RIGHT (A14) buttons to which you want to store the currently displayed channel then press OK button. Warning ! If you store the number already programmed, the previous programmes will be erased automatically. 5 DAILY USE SWITCHING ON AND OFF TV SET SWITCHING ON If stand-by indicator (B5) is not lit, then the TV set is powered off. Switch the set ON with POWER (ON/OFF) Button (B1), then, stand-by indicator turns to red. Press again PROGRAM UP or DOWN buttons (B9) on the front of the set, or POWER button (A2) or UP (A11)/DOWN (A12) button or, one of the NUMBER 0...9 button on the remote control, then stand-by indicator turn to green and picture appears on the screen. If stand-by indicator (B5) is flashing red and green, TV set is in CHILD LOCK mode. To deblock CHILD LOCK, press the remote control POWER button (A2) or one of NUMBER 0...9 buttons (A3) or PROGRAM UP (A11) / DOWN (A12) buttons. Note : The front panel PROGRAM UP or DOWN (B9) button will not function when CHILD LOCK is ON. ENGLISH SWITCHING OFF Press POWER button (A2) on the remote control to return the set to its STAND BY mode. If you don't use the set for an extended period of time, turn it off with MAIN POWER button (B1) on the set. PROGRAM SELECTION (FROM 0 TO 99) DIRECT SELECTION Use the remote control NUMBER 0..9 buttons (A3). For two digit program numbers, enter the second digit within 2 seconds. From AV mode, you can select TV program directly by pressing remote control 0.....9 buttons (A3). 1 4 7 2 5 8 0 3 6 9 UP/DOWN SELECTION Use the remote control PROGRAM UP (A11) / DOWN (A12) buttons or the TV set front panel PROGRAM UP / DOWN buttons (B9). P or P 6 SOUND CONTROL Volume adjustment Use the remote control VOLUME UP (A14) / DOWN (A13) buttons or the TV set front panel VOLUME UP / DOWN buttons (B8). Mute - Mute the sound by pressing the remote control SOUND MUTE button (A1). - Then, logo is displayed. The previous sound setting is returned after pressing the same button a second time. - If a sound related function is used (e.g. VOLUME, the MUTE will also be cancelled. ) then P or P ENGLISH - + Sound effects A SPATIAL sound effect is available, by using the remote control (A5) button. Mono forcing, dual language - If you are unable to get good sound quality for a program due to poor reception, you can force a change from stereo to mono transmission by pressing the remote control MODE button (A26). Then the program status display will indicate "MONO" with a ( ) icon. PICTURE/OK The following display appears: SPATIAL STEREO 18:30 Spatial sound effect Sound transmission mode Clock I/II To return to initial sound effect, press again the The following display appears: (A5) button. - On the other hand, during a program with dual language transmission, the MODE button (A26) allows you to toggle between the first and second language. The program status display will indicate "DUAL 1" or "DUAL 2" (plus NICAM according to the received signal) instead of Stereo or Mono. - To return to initial state, press again the MODE button (A26). OFF STEREO 18: 30 No sound effect Sound transmission mode Clock For other adjustments such as BALANCE, BASS or TREBLE, use the SOUND menu (here under). SOUND MENU Select SOUND menu from the MAIN menu. - Select VOLUME function to adjust the volume level ...