AV-28PS4N DEUTSCH ENGLISH FARBFERNSEHGERÄT VICTOR COMPANY OF JAPAN, LIMITED BEDIENUNGSANLEITUNG INSTRUCTIONS COLOUR TELEVISION 50049547 ©2004 VICTOR COMPANY OF JAPAN, LIMITED 0503-JVC Contents Safety Precautions ................................................. 15 Remote Control Buttons ........................................ 16 Control Panel Buttons ............................................ 17 Antenna Connections ............................................. 17 Preparation .............................................................. 18 Features ......................................................................... 18 Safety Precautions 1. Power Source The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting for your convenience. 2. Power Cord The power supply cord should be placed so that they are not likely to be walked on or pinched by items placed upon them or against them. Pay particular attention to cord where they enter the plug, power outlet, and the point where they exit from the receiver. Before Switching on your TV ................................ 18 Power connection............................................................ 18 Aerial Connections .......................................................... 18 How to connect the external equipments ......................... 18 Inserting batteries in the remote control handset ............. 18 3. Moisture and Water Do not use this equipment in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this equipment to rain or water and do not place objects filled with liquids on it as this may be dangerous. Switching the TV ON/OFF ...................................... 18 To switch the TV on ......................................................... 18 To switch the TV off ......................................................... 18 Initial Settings ......................................................... 18 Operating with the onset buttons ..................................... 19 Operating with Remote Control ........................................ 19 4. Cleaning Before cleaning, unplug the receiver from the main supply outlet. Do not use liquid or aerosol cleaners. Use with soft and dry cloth. Menu System ........................................................... 19 Sound Menu .................................................................... 19 Picture Menu .................................................................. 20 Feature Menu .................................................................. 21 Install. Menu ................................................................... 21 Program. (Programming) Menu ....................................... 22 5. Ventilation The slots and openings on the receiver are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway. Other Features ........................................................ 23 Sound Mute .................................................................... 23 Information on Screen ..................................................... 23 To Display the Time ......................................................... 23 Standard ......................................................................... 23 VCR Control Buttons ....................................................... 23 6. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet. 7. Replacement Part When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock, or other hazards. Teletext .................................................................... 23 To operate Teletext .......................................................... 23 To select a page of Teletext ............................................. 23 To Select Index Page ...................................................... 24 Searching for a teletext page while watching TV .............. 24 To Select Double Height Text .......................................... 24 To Reveal concealed Information ................................... 24 To Stop Automatic Page Change ..................................... 24 To Select a Subcode Page .............................................. 24 To exit Teletext ................................................................ 24 Fastext and Toptext ........................................................ 24 8. Servicing Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock. 9. Flame sources Do not place naked flame sources on the apparatus. Connect the External Equipments ........................ 25 Via the Euroconnector ..................................................... 26 RGB mode ...................................................................... 26 AV-2 S Mode ................................................................... 26 Via the RCA jacks ........................................................... 26 Via the ANT (aerial) socket .............................................. 26 TV and Video Recoder (VCR) .......................................... 26 NTSC Playback .............................................................. 26 Copy Facility ................................................................... 26 Connecting Headphones ................................................. 26 10. Stand-By Do not leave your TV stand-by or operating condition when you leave your house. Warning! Any intervention contrary to regulations, in particular, any modification of high voltage or a replacement of the picture tube may lead to an increased concentration of x-rays. Any television modified in this way no longer complies with license and must not be operated. Tips ........................................................................... 26 Specifications .......................................................... 27 Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children. ENGLISH - 15 - Remote Control Buttons = Stand By / Power 0 - 9 = Direct Program Standard Button (PICTURE default settings) Colour Buttons MENU = Menu Button ( ( ) = Cursor Up / Programme Up ) = Cursor Right / Volume + Teletext Control Buttons VCR Control Buttons ( ( ) = Cursor Down / Programme Down ) = Cursor Left / Volume - AV = AV Button = Information Button = Mute CAUTION RISK OF ELECTRIC SHOCK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock of persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. ENGLISH - 16 - Control Panel Buttons Antenna Connections ENGLISH - 17 - Preparation Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. NOTE: Remove batteries from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Switching the TV ON/OFF You can operate your TV either using the remote control handset or directly using the TV onset buttons. Features It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system. It has two Euroconnector sockets for external devices (such as video recorder, video games, audio set, etc.) Front AV Input available. Stereo sound systems (German+Nicam) are available. 3D Panorama. Full function Teletext (Fastext, Toptext). It is possible to connect headphone. Direct channel access. APS (Automatic Programming System). All programmes can be named. Forward or backward automatic tuning. Sleep timer. Child Lock. Automatic sound mute when no transmission. 5 minutes after the broadcasting (closedown), the TV switches itself automatically to stand-by mode. To switch the TV on Your TV will switch on in two steps: 1- Press the power button located on the front of the TV. Then the TV switches itself to standby mode and the RED LED located below the TV turns on. 2- To switch on the TV from stand-by mode either: Press a digit button on the remote control so that a programme number is selected, or, Press Standby / Power Button or Programme Up and Down buttons on the front of the TV or on the remote control respectively, so the TV will switch on and the RED Led will turn GREEN. To switch the TV off Press the stand-by button on the remote control, so the TV will switch to stand-by mode and the GREEN LED will become RED, or, Press the power button located on the front of the TV. Initial Settings The message "PLEASE CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM" will be displayed when you turn on your TV for the first time. or button, then 1- Select LANGUAGE with the press the or button to select a menu language. or button, then 2- Select COUNTRY with the press the or button to select the country you are now located. or button, then press 3- Select START with the the button to start APS. APS (Automatic Programming System) automatically programmes the received channels in your TVs programme numbers. During APS, "A. P. S. IS RUNNING" will be displayed. After APS is finalized, the PROGRAM. menu appears. To cancel APS, press the button. You can delete a channel, insert a channel into a programme number, or re-start APS with the PROGRAM. menu. For details, see Program. (Programming) Menu on page 22. 4- Press the "STANDARD" button to complete the initial settings. After the initial settings are complete, you can change a programme number or to name a programme number or to programme new channel manually. For details, see Install. Menu on page 21. If the message "PLEASE CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM" does not appear, follow the description Program. (Programming) Menu on page 22 to select a menu language and the country where you are now located, and to use A.P.S.. Before Switching on your TV Power connection Important: The TV set is designed to operate on 220-240 V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Aerial Connections Connect the aerial plug to the aerial input socket located at the back of the TV. How to connect the external equipments See Connect the External Equipments on page 25. See the instruction manuals provided with the external devices too. Inserting batteries in the remote control handset Remove the battery cover located on the back of the handset by gently pulling upwards from the indicated part. Insert two AA (R6) or equivalent type batteries inside. Replace the battery cover. ENGLISH - 18 - Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9. TV will switch to the selected program after a short delay. When you press first digit, second digit will be displayed with - symbol for 3 seconds. To select programmes between 10 and 99 press corresponding digit buttons consecutively before - symbol on the second digit disappears. (e.g. for programme 27, first press 2 and then 7 while program number displayed as 2- ) Menu System Operating with the onset buttons Volume setting and programme selection can be made using the buttons on the front panel. Your TV has been designed with a menu system. Display MENU (main menu) and enter one of five menus (SOUND, PICTURE, FEATURE, INSTALL. and PROGRAM.). 1- Press MENU button to display MENU (main menu). The menu titles will be displayed in the main menu. 2- Press or button to select a menu title, then press or button to enter the menu. To exit a menu, press STANDARD button. To go to the previous menu, press MENU button. Volume Setting: Press button to decrease volume or + button to increase volume, so a volume level scale will be displayed on the screen. Programme Selecting: Press P button to select next programme or ton to select the previous programme. P but- Sound Menu To change sound settings: Press MENU button, now you are in main menu. In the or button, main menu, select SOUND using then ente ...